The use of force modulation microscopy to investigate block copolymer morphology

Force modulation microscopy (FMM) is used to characterize the external surface and internal fracture surface morphologies of three different block copolymer samples. A roll-cast poly(styrene-butadiene-styrene) triblock copolymer film, spin-coated poly(styrene-b-methyl methacrylate) thin films, and an ultrathin poly(styrene-b-hexyl isocyanate) rod-coil block copolymer film were investigated. For each sample, height and elasticity images were obtained for the same areas allowing direct comparison. The elasticity images obtained using force modulation microscopy were independent of surface roughness and found to exhibit better contrast and spatial resolution of the respective block copolymer domains than the height images. The lateral resolution of the elasticity images was sufficient to show microphase separated domains having length scales as small as about 10 nm. The poly(styrene-b-methyl methacrylate) samples demonstrate that FMM can even be successfully used to study block copolymers in which both blocks are glassy under the conditions of measurement.     

Finite element modelling of calendering — some aspects of the effects of temperature gradients and structure inhomogeneities

The compression of a paper web in a calender nip has been simulated using the finite element method. The mechanical properties of the paper were allowed to vary in the thickness and machine directions of the web. This was done in order to model the influence of temperature gradients as well as density variations (due to the presence of fibre floes) on the deformation behaviour in the nip. Paper was assumed to be an elastic-plastic material exhibiting strain hardening. The yielding behaviour was governed by the Drucker-Prager yield condition. Simulations of the deformation behaviour when paper was subjected to a temperature gradient, clearly revealed that the deformation gradually became more concentrated towards the surface layers as the temperature of the surface increased. This is in accordance with experimental results which indicate that temperature-gradient calendering promotes the surface properties, whereas the bulk of the structure is preserved. Modelling the deformation behaviour of a structure containing density variations reveals that the paper may contain an inhomogeneous strain distribution after unloading, i.e. after passage through the nip.     

A numerical model for the dissolution of spherical particles in binary alloys under mixed mode control

A general numerical model is described for the dissolution kinetics of spherical particles in binary systems for any combination of first order reactions at the particle-matrix interface and long distance diffusion within the matrix. The model is applicable to both finite and infinite media and handles both complete and partial particle dissolution. It is shown that interfacial reactions can have a strong effect on the dissolution kinetics, the solute concentration at the particle-matrix interface and the solute concentration profile in the matrix.     

Breaking substitution cyphers using stochastic automata

Let Λ be a finite plaintext alphabet and V be a cypher alphabet with the same cardinality as Λ. In all one-to-one substitution cyphers, there exists the property that each element in V maps onto exactly one element in Λ and vice versa. This mapping of V onto Λ is represented by a function T*, which maps any v∈V onto some λ∈Λ (i.e., T*(v)=λ). The problem of learning the mapping of T* (or its inverse (T *)^-1) by processing a sequence of cypher text is discussed. The fastest reported method to achieve this is a relaxation scheme that utilizes the statistical information contained in the unigrams and trigrams of the plaintext language. A new learning automaton solution to the problem called the cypher learning automaton (CLA) is given. The proposed scheme is fast, and the advantages of the scheme in terms of time and space requirements over the relaxation method have been listed. Simulation results comparing both cypher-breaking techniques are presented     

Stimulation of monocyte tissue factor expression in an in vitro model of bacterial endocarditis

The coagulation system plays a major role in the formation of the infected endocardial vegetation in bacterial endocarditis. Since monocytes can express tissue factor (TF) on their surfaces, they are thought to be responsible for the extrinsic activation of the coagulation cascade during this disease. The present study used an in vitro model in which fibrin plates, isolated adherent monocytes, and Streptococcus sanguis were used as an analog for endocardial vegetations. Adherence to fibrin by itself was found to stimulate TF expression on the monocytes, but stimulation by S. sanguis significantly increased TF expression, which was found to be maximal at a bacterium-to-monocyte ratio of 9 or more.     

Multipoint communication: a survey of protocols, functions, andmechanisms

Group communication supports information transfer between a set of participants. It is becoming more and more relevant in distributed environments. For distributed or replicated data, it provides efficient communication without overloading the network. For some types of multimedia applications, it is the only way to control data transmission to group members. This paper surveys protocol functions and mechanisms for data transmission within a group, from multicast routing problems up to end-to-end multipoint transmission control. We provide a bibliography which is organized by topic     

Visual functions after photorefractive keratectomy

1. 45 myopes (-3.0 to -6.0 D) were examined before and 1 and 6 months after photorefractive keratectomy (PRK). Visual acuity (VA) was tested using Snellen and logMAR charts. Contrast sensitivity (CS) was measured using a computerized system. 2. Preoperative best corrected VA (BCVA) in myopes was significantly lower in comparison with a control group using logMAR charts only. A reduction of BCVA by both methods at 1. month and its return after 6 months nearly to original values was noted. 3. Significantly lower values of CS were found in patients before PRK compared to the control group. After 1 and 6 months stayed the values on preoperative level.     

Intracavitary afterloading therapy as a new technique of boost irradiation in anal canal carcinoma

PURPOSE: There are different techniques of boost irradiation in the treatment of patients with anal carcinoma. A new system of applicators is presented, which can be used for an intracavitary afterloading therapy. MATERIAL AND METHODS: Three different applicators are available, the first with a central catheter (K1), a second with 5 semicircular fixed catheters (K2) and an eccentric shield, a third with 8 circular fixed catheters and a central shield (K3). RESULTS: The adequate choice of applicator and catheters takes into consideration the individual localisation and extension of anal carcinoma in planning therapy. Thus, in circular growing tumors, an irradiation of the whole circumference of the anal canal is possible. In non-circular growing tumors, the dose applied in the non-affected part of the anal canal can be reduced to a quarter of the dose applied at the tumor. CONCLUSION: The new system of intracavitary afterloading therapy is a good alternative to previous techniques of boost irradiation in the treatment of anal carcinoma. By means of this technique, irradiation can be highly individualized, the tumor better included and non-affected sections of the anal canal saved.     

EFFECT OF STORAGE ON THE RHEOLOGICAL BEHAVIOUR OF BABY FOODS

The effect of storage temperature on rheological behaviour of four varieties of baby foods was studied. After 24-month storage at 15C and 25C, the constant A in Weltman model increased significantly for the vegetables, meat and fish samples, and decreased significantly for the fruit samples. After 24-month storage at 5C and 15C there were no significant changes in flow behavior index, consistency index and yield stress of the Herschel-Bulkley model for the vegetables, meat, fish and fruit samples. Increase in storage temperature decreased the consistency index and yield stress of the fruit samples.     

NMR IMAGING, CALORIMETRIC, and MATHEMATICAL MODELING STUDIES of FOOD FREEZING

Nuclear magnetic resonance imaging (MRI), calorimetry, and temperature measurements were used to monitor cylindrical potato sections frozen at -11C and -42C. MRI showed the advance of the nonsymmetric freezing zone and loss of signal intensity as liquid water turned to ice. Differential calorimetry was used to follow heat removal during transient freezing. Measured times to 95% enthalpy change were 24 min (-42C) and 49 min (-11C), as compared to modeled values of 29 min (-42C) and 100 min (-11C). Times to 95% change in the NMR signal, integrated over the area of the image, were 21 min (-42C) and 56 min (-11C). Changes in NMR signal intensity could be correlated with the amount of unfrozen water remaining after a steady-state had been reached. At -42C, NMR indicated 25% unfrozen water remaining as compared to 26% by calorimetry, and 22% by modeling. At -11C, NMR measured 67% unfrozen water remaining as compared to 48% by calorimetry, and 25% by equilibrium modeling.