Conditions for reliable dewatering systems based on voidless drainage in slightly permeable soils

Conclusions 1. Use of dewatering systems based on voidless drainage is most effective when dewatering slightly permeable soils in regions with a deep seasonal frost. 2. Two-story drainage with the upper and lower stories spaced 30 m apart accelerates the discharge of gravitational water from the arable layer. Results of observations on two-story drainage in experimental-production sections indicated that it discharges 2 – 3.8 times more water than systematic tubular drainage with an interdrain spacing of 10 m and a 0.2-m thick three-dimensional filter of a sandy-gravelly mixture. 3. It is recommended to use crushed stone and porous-clay gravel with a fineness of 10 – 20 mm as a filler. In that case, protection of the drain filler is, as a rule, required only from the intrusion of soil from above during construction in cohesive soils with a plasticity indexW _p≥7. 4. seepage rate in a voidless drain should be lower than the scouring velocity for the soil in which the voidless drainage is placed. In the opposite case, it is necessary to lower the grade of the drains or select a filler gradation such that the seepage rate in the drain be lower than the scouring velocity. Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 8, pp. 41–43, August, 1998.     

Low-truncation-error finite difference equations for photonicssimulation. II. Vertical-cavity surface-emitting lasers

For part I see, ibid., p. 134, 1998. The basic approach outlined in the previous article is applied to the difficult problem of computing the optical modes of a vertical-cavity surface-emitting laser. The formulation utilizes a finite difference equation based upon the lowest order term of an infinite series solution of the scalar Helmholtz equation in a local region. This difference equation becomes exact in the one-dimensional (1-D) limit, and is thus ideally suited for nearly 1-D devices such as vertical-cavity lasers. The performance of the resulting code is tested on both a simple cylindrical cavity with known solutions and an oxide-confined vertical-cavity laser structure, and the results compared against second-order-accurate code based upon Crank-Nicolson differencing     

A biased percolation model for the analysis of electronic-device degradation

The biased percolation model is proposed for investigating device degradation and failure associated with the generation of defects due to local Joule heating. The degradation processes of a thin conducting or semiconducting film is monitored by a set of relevant indicators, such as: the evolution of damage pattern, the current distribution, the film resistance and its fluctuations, the defect concentration, the film lifetime, etc. The conductor-insulator (CI) and conductor-superconductor (CS) like degradation processes are considered. The results can be used to propose non-destructive indicators to test the reliability of samples and to interpret the corresponding experiments.     

On the reliability of Landsat TM for estimating forest variables byregression techniques: a methodological analysis

In order to build models that relate thematic mapper (TM) imagery to field forest variables, several regression techniques, such as the ones based on the Mallows' C_p and the adjusted R² statistics, were applied. Nevertheless, although the best created models had good fittings (R²>0.65) apparently supported by a clear statistical significance (p<0.0001), later trials tested with additional plots showed that these models were, in fact, nonrobust models (models with very low-predictive capabilities). Two factors were pointed out as causes of these inconsistencies between predicted and observed values: a relatively small number of available field plots and a relatively high number of possible independent variables. Actually, different trials suggested much lower fittings for the expected “really” predictive models. Some restrictions of TM satellite data, such as its radiometric, spectral, and spatial limitations, together with restrictions arising from gathering and processing of field data, might have led to these poor relations. This study shows the need for guarantees stronger than the usual ones before concluding that there is a clear possibility of using satellite information to estimate forest parameters by means of regression techniques     

Soft commutation in capacitive idling converters

The capacitive idling converters derived from the Cuk, SEPIC, Zeta, and flyback topologies allow soft commutation of power switches without the need for additional circuitry, making it possible to increase the switching frequency while maintaining high efficiency     

Low temperature delamination of plastic encapsulated microcircuits

Plastic encapsulated microcircuits (PEMs) are increasingly being used in applications requiring operation at temperatures lower than the manufacturer’s recommended minimum temperature, which is 0°C for commercial grade components and −40°C for industrial and automotive grade components. To characterize the susceptibility of PEMs to delamination at these extreme low temperatures, packages with different geometries, encapsulated in both biphenyl and novolac molding compounds, were subjected to up to 500 thermal cycles with minimum temperatures in the range −40 to −65°C in both the moisture saturated and baked conditions. Scanning acoustic microscopy revealed there was a negligible increase in delamination at the die-to-encapsulant interface after thermal cycling for the 84 lead PQFPs encapsulated in novolac and for both 84 lead PQFPs and 14 lead PDIPs encapsulated in biphenyl molding compound. Only the 14 lead novolac PDIPs exhibited increased delamination. Moisture exposure had a significant effect on the creation of additional delamination.     

一种多晶硅高温压力传感器

制作压力传感器时，在二氧化硅层上淀积多晶硅膜，既可利用优良的机械特性，又可保证压敏电阻与衬底间具有良好的绝缘性，由此可大大提高器件的温度特性。介绍了一种多晶硅压力传感器的原理和设计。实验结果表明，这类传感器具有灵敏度好，精度高等特点，电路工作范围为０－２５０℃，且具有良好的温度稳定性。     

Analysis of low bit rate image transform coding

Calculations based on high-resolution quantizations prove that the distortion rate D(R¯) of an image transform coding is proportional to 2^-2R when R¯ is large enough. In wavelet and block cosine bases, we show that if R¯<1 bit/pixel, then D(R¯) varies like R¯^1-2γ, where γ remains of the order of 1 for most natural images. The improved performance of embedded codings in wavelet bases is analyzed. At low bit rates, we show that the compression performance of an orthonormal basis depends mostly on its ability to approximate images with a few nonzero vectors