Parallel implementation of large-scale structural optimization

Advances in computer technology and performance allow researchers to pose useful optimization problems that were previously too large for consideration. For example, NASA Langley Research Center is investigating the large structural optimization problems that arise in aircraft design. The total number of design variables and constraints for these nonlinear optimization problems is now an order of magnitude larger than anything previously reported. To find solutions in a reasonable amount of time, a coarse-grained parallel-processing algorithm is recommended. This paper studies the effects of problem size on sequential and parallel versions of this algorithm.For initial testing of this algorithm, a hub frame optimization problem is devised such that the size of the problem can be adjusted by adding members and load cases. Numerous convergence histories demonstrate that the algorithm performs correctly and in a robust manner. Timing profiles for a wide range of randomly generated problems highlight the changes in the subroutine timings that are caused by the increase in problem size. The potential benefits and drawbacks associated with the parallel approach are summarized.     

Use of petrochemical waste in the glass industry

It is suggested that ferrochrome slags used for coloring container glass be replaced by waste materials of the petrochemical industry. The expediency of the use of the waste is shown. Recommendations are given on the use of petrochemical waste for coloring container glass.     

Analysis of a soliton-based logic module for a ring network

We analyze and numerically study the code-matching logic module that is the central element in a proposed soliton-based ring network system running at peak rates of 100 Gb/s. The proposed network is packet-switched, and fast logic is required to route each packet. That is the function of the code-matching logic module, and four soliton logic gates that can perform fast logic are the key devices in its design. The behavior of the code-matching logic module is governed by a large set of parameters, and we simulate it by varying many of these parameters. The physical effects that occur in these devices and their significance are analyzed. The results indicate that the logic module will work but within a restricted parameter range     

Growth of CuInSe2 by metallorganic chemical vapour deposition (MOCVD): new copper precursor

Metallorganic chemical vapour deposition (MOCVD) of Cu-In-Se ternary compounds is performed in a horizontal reactor at atmospheric pressure. A copper precursor has been specially developed for this purpose and is used around room temperature. It is hexafluoroacetylacetonato copper mixed with trimethylamine (Cu(hfa)₂, NMe₃). The other source materials are triethylindium (TEIn), trimethylindium (TMIn) and hydrogen selenide (H₂Se). Experimental parameters are detailed and related to the film composition. Properties of thin films are also investigated in the whole range of compositions obtained.     

A study of solid circulation rate in a circulating fluidized bed

An experimental investigation under cold condition was made to study the effects of some operating/design parameters and non-mechanical L valve configuration on the solid circulation rate in a 4.5 m tall, 0.15 m diameter circulating fluidized bed with riser flow rate varying from 1400 litres/min to 2000 litres/min and bed inventory from 15 kg to 25 kg of sand of average sizes 200 μm, 400 μm and 500 μm. Solid circulation rate was estimated by measuring velocity of sand particle travelling through a vertical Perspex tube section at the bottom of the return leg. It was found to be in the range of 2.8 to 12.3kg/m²s, 0.07 to 9.1kg/m²s and 0.12 to 2.23kg/m²s for sand sizes of 200 μm, 400 μm and 500 μm, respectively for a horizontal L valve. Two mathematical correlations have been developed from the experimental results to predict solid circulation rate as a function of riser flow rate, aeration flow rate, total bed inventory and particle size used.     

Controlled-Release Matrix of Acetaminophen-Ethylcellulose Solid Dispersion

In this study ethylcellulose was evaluated as a carrier for preparation of prolonged release acetaminophen tablets. Solid dispersions containing three levels of ethylcellulose and acetaminophen (1:3; 1:1; 3:1) were prepared by the solvent method. Also physical mixtures at the same level of ethylcellulose and acetaminophen were prepared. Systems composed of solid dispersion or physical mixture containing the equivalent weight of 50 mg acetaminophen, Lactose fast-flo as diluent and 1% magnesium stearate as lubricant were compressed into tablets and tested for dissolution. The dissolution data showed that the drug release decreased as the level of ethylcellulose increased in the solid dispersion formulations. The drug release from tablets prepared with solid dispersion followed the diffusion controlled model for inert porous matrix, while the drug release from tablets prepared with physical mixture followed the first-order kinetic model.     

Guard sequence optimization for block transmission over linearfrequency-selective channels

We show that the optimum length-ν guard sequence for block transmission over a linear Gaussian-noise dispersive channel with memory ν is a linear combination of the N information symbols of the block. A closed-form expression for the optimum guard sequence is derived subject to a total average energy constraint on the information and guard symbols. The achievable channel block throughput with the optimum guard sequence is compared with that achievable with two common guard sequence types, namely zero stuffing and cyclic prefix     

Monitoring the planning quality of health promotion projects in Flanders

The levels of bacterial blood endotoxin, antiendotoxin antibodies and the overall immunity were studied in 48 females with inflammatory genital diseases complicated by pelvioperitonitis. The severest pelvioperitonitis-complicated abnormality was shown to characterized by high concentrations of endotoxin and low levels of antibodies. Endotoxinemia was found to be of diagnostic and prognostic value.     

Angiotensin II receptor type 1 mRNA is upregulated in atria of patients with end-stage heart failure

There is increasing evidence that pathological changes in the myocardium during chronic heart failure (CHF) are partly regulated through the activation of the renin-angiotensin system (RAS), an effect mediated by the angiotensin II type 1 receptor (AT1R). We examined the expression of cardiac AT1R mRNA in normal (atria, n=7; ventricle, n=3) and end-stage CHF human hearts (atria, n=8; ventricle, n=14). Tissue was snap-frozen immediately after explantation during orthotopic cardiac transplantation; control specimens were obtained from healthy donor hearts rejected for technical reasons. Northern blots of purified total mRNA from each tissue were hybridized with a random primed radiolabeled probe for the coding sequence of AT1R. Stringent conditions were used for both hybridization (5X SSC, 65 degrees C) and washing (0.5X SSC, 0.1% SDS, 65 degrees C) of the membrane. Left and right atrial tissue showed low levels of AT1R mRNA expression in the controls, with statistically significant upregulation of expression in tissue from pathological hearts; CHF atria 1.28+/-0.86 optical density (OD) units, control atria 0.56+/-0.31 OD units, P=0.05 (mean+/-s.d.). There were undetectable levels in ventricles from either control (2/2) or dilated hearts (7/7). The results were independent of the etiology of the heart failure and suggest that increased levels of atrial AT1R mRNA may occur in response to elevated atrial pressures in heart failure.