破伤风毒素及其片段的纯化

本文报道了破伤风毒素及其片段AB、BC、A和C的纯化方法。应用硫酸铵沉淀和Ultrogel AcA_(34)凝胶过滤制备的纯化毒素,于SDS-PAGE和PAGE中均形成单一的蛋白带,分子量为15万,pI为5.95,毒力为1～3×10~4MLD/μg。毒素经DTT还原、尿素处理、再用Ultrogel AcA_(44)凝胶过滤制备A和BC片段。A片段的分子量为54000,pI为4.8。BC片段的分子量为98 000,pI为7.2。木瓜酶处理毒素后用高压液相层析制备AB和C片段。纯化的AB片段分子量为98 000,于等电聚焦中为2条主要区带,pI为5.3和5.5,另有数条小区带;纯化的C片段分子量为51000,于PAGE中形成5条蛋白带,于等电聚焦中主要区带的等电点为7.3,另有几条小区带。     

Ethylene carbonate-based organic electrolytes for electric double layer capacitors

A new electrolytic solution based on a mixed solvent of ethylene carbonate (EC) with sulfolane (SL) or -butyrolactone (-BL) has been examined as an electric double layer capacitor. Fundamental properties, such as electrolytic conductivity, viscosity, and thermal stability, were measured for solutions containing quaternary alkylammonium salts as the supporting electrolyte. Maximum conductivities were obtained for the solutions with mixed solvent of 20–40 mol % EC in the EC+-BL system: 1.2–1.3×10^–2S cm^–1 for EC+-BL dissolving 0.5 M Et₄ NBF₄ (Et=C₂H₅). The electrochemical and the thermal stabilities of the solution were dependent on the electrolytic salt as well as the solvent composition. A stable discharge capacitance and a high coulombic efficiency were obtained in a model capacitor using carbon fibre electrodes and the organic electrolyte of EC+-BL/Et₄NBF₄ (or EC+-BL/Et₄NPF₆).     

Synthesis of High Density and Transparent Forsterite Ceramics Using Nano-Sized Precursors and Their Dielectric Properties

Forsterite (Mg₂SiO₄) ceramics were prepared using Mg(OH)₂ and SiO₂ as precursors, and the effect of powder characteristics of Mg(OH)₂ on calcination and sintering was investigated. The use of highly dispersed Mg(OH)₂ powder (HD powder) resulted in a lower calcination temperature. Forsterite powder of high homogeneity and small particle size prepared from the HD powder enabled synthesis of high-density forsterite ceramics by ordinary sintering without applying external pressure. Moreover, transparent forsterite ceramics were successfully synthesized through addition of excess Mg to the precursors to compensate for Mg evaporated during the sintering process. Subsequent dielectric measurements revealed that the transparent forsterite ceramics had a very low dielectric loss (tan δ<10⁻⁴).     

Behavior Of Glyoxal During Granular Activated Carbon Treatment

Glyoxal, which was the strong mutagen formed by ozonation of humic substances, was treated with granular activated carbon (GAC) and the behavior of glyoxal was investigated. Glyoxal itself was adsorbed well on GAC at pH 5–7. But, glyoxal increased by GAC treatment of ozonated humic substances when the ozone dose was insufficient to decolorize the humic substances. The precursors of glyoxal may be among other ozonated products which may be changed to glyoxal on GAC.     

Thermal stability of lamellar structure of PST crystal and lamellar boundary design for creep resistant TiAl alloy

The stability of lamellar structure is crucial for the creep resistance of TiAl alloys, but degradation of the lamellar structure is unavoidable at high temperatures. The degradation of the lamellar structure in PST crystals of Ti-48mol.%Al was studied during high temperature exposure (annealing and creep testing) to examine how to make a stable lamellar structure with high creep deformation resistance. Since the six orientation variants of γ lamellae are nucleated independently of the adjoining lamellae, pseudo twin and 120° rotational fault boundaries are most frequently observed at the initial stage of lamellar formation. The preferential removal of high energy (pseudo twin and 120° rotational fault) boundaries during the evolution of lamellar structure results in the highly probable appearance of a true twin boundary at a later stage of lamellar evolution. The coarsening of lamellar spacing and the spheroidization of the lamellae are the major degradation events occurring during creep deformation, and the migration of the lamellar boundaries brings both of them about. The lamellar structures of TiAl alloy contain four types of lamellar boundaries. The stability of the four types of boundaries decreases in the following order: γ/α₂ > true twin > pseudo twin > or=120° rotational fault boundaries. The γ/α₂ boundary has the highest stability (lowest mobility), and the high density of γ/α₂ boundaries is proposed to make a stable lamellar structure with good creep resistance. A material having the high density of γ/α₂ boundaries was produced through the heat treatment of a PST crystal in the α+γ two-phase regime. The excellent creep properties of the material were proven through creep tests of hard oriented PST crystals made of the material. This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.     

Analysis of right ventricular function during bypass of the left side of the heart by afterload alterations in both normal and failing hearts

This study investigated the mechanism of right ventricular failure during bypass of the left side of the heart by precisely assessing right ventricular function with use of a conductance catheter. Bypass of the left side of the heart was established with a centrifugal pump in 10 mongrel dogs weighing 11 to 19 kg. Right ventricular function during left heart bypass was evaluated by two parameters that were both derived from measurement of relative change in right ventricular volume by the conductance catheter technique. One parameter was the right ventricular end-systolic pressure-volume relationship as a load-independent index, and the other was the peak right ventricular pressure-right ventricular stroke volume relationship as a "force-velocity relationship." These parameters were measured in both normal and failing hearts while afterload was increased by bilateral intrapulmonary balloon inflation. Moreover, changes in these relationships were observed by varying assist ratios of left heart bypass from 0% to 100%. Failing heart models were induced by normothermic aortic clamping for 20 minutes. The right ventricular end-systolic pressure-volume relationship in normal hearts did not change, irrespective of the assist ratio of left heart bypass, whereas that in failing hearts decreased from 4.25 +/- 1.41 mm Hg/ml without bypass of the left side of the heart to 3.53 +/- 1.30 mm Hg/ml after 100% assist of left heart bypass (p < 0.05). In the peak right ventricular pressure-right ventricular stroke volume relationship, right ventricular stroke volume was almost constant in normal hearts when afterload was increased regardless of the assist ratio of left heart bypass. Moreover, right ventricular stroke volume was maintained at a higher level during bypass of the left side of the heart compared with that without left heart bypass. However, that slope of the relationship in failing hearts was inversely linear and became significantly steeper after 100% assist of bypass of the left side of the heart compared with that without left heart bypass (-0.131 +/- 0.042 versus -0.051 +/- 0.038, p < 0.005). Therefore ++these two slopes of the relationship intersected at a point that was considered the critical point of afterload during bypass of the left side of the heart. In other words, right ventricular stroke volume was decreased by 100% left heart bypass above the critical point of afterload. In conclusion, this study demonstrates not only that bypass of the left side of the heart results in an increase in right ventricular stroke volume in both normal and failing hearts at the physiologic range of afterload, but also that right ventricular function against higher afterload is impaired by 100% assist of bypass of the left side of the heart in failing hearts.     

Experimental measurement on tangential momentum accommodation coefficient in a single microtube

The tangential momentum accommodation coefficient (TMAC) was investigated experimentally from the mass flow rate through a single microtube under the slip flow and the early part of the transition regime. The measurements were carried out by the constant-volume method under the mean Knudsen number smaller than 0.3, which is based on the mean pressure of the inlet and the outlet of the microtube, to apply the second-order slip boundary condition. To measure TMACs on various materials, quite large microtube was employed, which require the reduction in leakage. TMAC was obtained from the slip coefficient determined by the relation of the mass flow rate to the mean Knudsen number. The obtained mass flow rate was well explained by the theoretical equation. TMACs of deactivated-fused silica with argon, nitrogen, and oxygen were measured, showing the tangential momentum was not accommodated completely to the surface, and the values showed good agreement with previous studies. From the comparison between microtubes with different inner diameter, it is showed that TMAC is determined mainly by gas species and surface material.     

破伤风毒素的提纯及形成离子通道的特性

应用硫酸铵分段沉淀和 Ultrogei AcA_(34)凝胶过滤对破伤风毒进行了提纯,并对形成的离子通道在中毒作用中的功能进行了讨论。提纯的毒素与抗粗制毒素血清形成一条沉淀线,于聚丙烯酰胺凝胶电泳中形成单一的蛋白带,分子量为15万,等电点为5.95,毒力为1～3×10~4MLD/μg 蛋白。给小鼠注射低剂量毒素引起迟发性强直性痉挛;注射高剂量毒素引起快速的类肉毒毒素的松弛性麻痹,直至死亡。应用 Patch clamp 技术,破伤风毒素于人工磷脂膜上形成离子通道。只有当膜两侧存有 pH 梯度时毒素才形成离子通道,因此是 pH 依赖的。通道的电导系数为9 PS。