Kinetic study on free radical polymerization of alkyl acylamidoacrylates by pulsed laser polymerization using nitrogen laser

Radical polymerization of captodatively substituted alkyl acylamidoacrylates was studied by pulsed laser polymerization using a N₂ laser. Propagation rate coefficient of the acrylates was varied with solvents used in spite of a radical mechanism, but little varied with methyl, n-propyl, and isopropyl substituents on the acrylates. Arrhenius parameters for the propagation indicated that a solvent affected mostly on a frequency factor rather than a activation energy. In addition, it was suggested that these captodatively substituted propagating radicals were thermodynamically persistent but kinetically active in propagation, which resulted in rather smooth propagation in spite of bulky 1,1-disubstituted olefins. The mechanism of the polymerizations was discussed in detail on the basis of the kinetic studies and ESR spectroscopy.     

Aqueous solution properties of disulfide-linked fluorinated gemini and cleaved monomeric thiol surfactants

We prepared a fluorinated gemini surfactant containing a disulfide bond in its spacer chain, [C?F??(CH?)?N(CH?)?CH?CH?SSCH?CH?N(CH?)?(CH?)?C?F??]2Cl, and its analogue with a hexamethylene spacer. Monomeric thiol surfactant, [C?F??(CH?)?N(CH?)?CH?CH?SH]Cl, was readily produced by the cleavage of the gemini surfactant using dithiothreitol in water. The critical micelle concentration was determined using surface tension, conductivity, and fluorescence probe methods. The critical micelle concentration of the monomeric surfactant was significantly larger than that of the gemini surfactant. The surface tension of aqueous solution for the cleaved monomeric thiol surfactant returned gradually to the original value through the formation of the disulfide bond via air oxidation.     

Acceleration of the redox kinetics of VO2+/VO2 + and V3+/V2+ couples on carbon paper

The redox kinetics of VO²⁺/VO₂ ⁺ and V³⁺/V²⁺ couples on a carbon paper (CP, HCP030 N, Shanghai Hesen, Ltd., China) electrode were investigated in terms of their standard rate constant (k ₀) and reaction mechanism. The values determined for k ₀ for VO²⁺ ?? VO₂ ⁺ and V³⁺ ?? V²⁺ using the CP electrode are 1.0 × 10^?3 and 1.1 × 10^?3 cm s^?1, respectively. The value of k ₀ increases by one or two order(s) of magnitude compared with values obtained using electrodes composed of pyrolytic graphite and glassy carbon. The acceleration of the redox kinetics of vanadium ions is a result of the large surface area of the CP electrode. An inner-sphere mechanism for the reaction on the surface of the electrode is proposed. The kinetic features of vanadium redox reactions on the CP electrode reveal that CP is suitable for use as the electrodes in vanadium redox-flow batteries.     

Aqueous solution behavior of cationic surfactants containing sulfide linked alkyl chain

Cationic surfactants containing a thioether group in the hydrophobic chain were prepared by the reaction of alkanethiol and bromocholine bromide. The aqueous solution properties of the thio-surfactants were investigated and compared with conventional cationic surfactants. The Krafft temperatures of the thio-surfactants were lower than that of alkyltrimethylammonium bromide. The critical micelle concentrations were determined by the conductivity method, and pyrene and SPQ fluorescence probe methods. A linear relation was observed for the plots of cmc vs. chain length. However, the cmc of the thio-surfactants depended on the position of the thioether group in the hydrophobic alkyl chain. It was found that the thioether group exhibited quenching ability toward SPQ fluorescence. The variation of the surfactant monomer concentration in equilibrium with micelles can be estimated from Stern-Volmer plots.     

Structural chirality of cholesteric liquid crystal produces atropisomerism: Chiroptical polyisocyanides from achiral monomer in cholesteric liquid crystal matrix

1-Naphthyl isocyanide was polymerized with Ni(II) catalyst in a cholesteric matrix at the liquid crystal (LC) temperature range. The resultant polymers showed optical activity. In this reaction, the structural chirality of cholesteric LC effectively functions to impart one-handed helicity on the corresponding polymers as an optically active atropisomer.     

Effects of reprocessing on the hygroscopic behavior of natural fiber high‐density polyethylene composites

Detailed analysis of the effects of recycling process on long‐term water absorption, thickness swelling, and water desorption behavior of natural fiber high‐density polyethylene composites is reported. Composite materials containing polyethylene and wood flour, rice hulls, or bagasse fibers and 2% compatibilizer were produced at constant fiber loading and were exposed to a simulated recycling process consisting of up to five times grinding and reprocessing under controlled conditions. A wide range of analytical methods including water absorption/desorption tests, thickness swelling tests, density measurement, scanning electron microscopy, image analysis, contact angle, fiber length analysis, Fourier transform infrared spectroscopy, and tensile tests were employed to understand the hygroscopic behavior of the recycled composites. Water absorption and thickness swelling behaviors were modeled using existing predictive models and a mathematical model was developed for water desorption at constant temperature. Results indicated that generally the recycled composites had considerably lower water absorption and thickness swellings as compared with the original composites which were attributed to changes in physical and chemical properties of the composites induced by the recycling process. Water desorption was found to be faster after recycling. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Electrochemical conversion of carbon dioxide to methane in aqueous NaHCO3 solution at less than 273 K

The electrochemical reduction of CO₂ on a Cu electrode was investigated in aqueous NaHCO₃ solution, at low temperature. A divided H-type cell was employed, the catholyte was 0.65 mol dm⁻³ NaHCO₃ aqueous solution and the anolyte was 1.1 mol dm⁻³ KHCO₃ aqueous solution. The temperature during the electrolysis of CO₂ was decreased stepwise to 271 K. Methane and formic acid were obtained as the main products. The maximum Faradaic efficiency of methane was 46% at −2.0 V and 271 K. The efficiency of hydrogen formation, a competing reaction of CO₂ reduction, was significantly depressed with decreasing temperature. Based on the results of this work, the proposed electrochemical method appears to be a viable means for removing CO₂ from the atmosphere and converting it into more valuable chemicals. The synthesis of methane by the electrochemical method might be of practical interest for fuel production and the storage of solar energy.     

Synthesis and characterization of chitosan/poly(acrylic acid) polyelectrolyte complex

Polyelectrolyte complex based on chitosan and acrylic acid monomer by photoinitiated free‐radical polymerization in the absence of crosslinker showed a large transition in swelling in response to changes in pH of surrounding medium. Their ability to swell arises from polyelectrolyte interactions and molecular structure of the complex. The main properties of interest that related to the molecular structure, swelling volumes, glass transition temperature, and elastic modulus of the complex were investigated. The effect of water content, the only variable in the sample component, played an important role in molecular structure of the complex and as a consequence, the extent of intermolecular linkage, especially amide bonds which in turn governed the degree of swelling of the polyelectrolyte complex in this study. The decreased degree of swelling and higher temperature shift of glass transition temperature was found with increased water content, whereas increased modulus of elasticity of dry complex was found in lower water content of synthesis component. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1025–1035, 2002     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

Structural,Thermal and Magnetic Properties of Thin Metal Films and Adsorbate–Substrate Systems Studied by XAFS and XMCD

Thin metal films often exhibit interesting properties that are essentially different from the bulk ones. XAFS (X-ray absorption fine structure) and XMCD (X-ray magnetic circular dichroism) techniques are quite suitable to investigate structural, thermal and magnetic properties of thin metal films. In this proceeding, we will present following two topics concerning structural and magnetic properties of adsorbates on thin metal films. The first one is the adsorption geometry of SO₂ on a 1-monolayer (ML) Pd thin film grown on a Ni(111) single crystal. It was found by S K-edge XAFS that SO₂ is lying flat on 1-ML Pd/Ni(111). This result is not similar to the bulk Pd surface but to the bulk Ni one. This finding indicates significant modification of the electronic structure of the 1-ML Pd film compared to the bulk one. The second topic is the magnetic moment induced on CO adsorbed on Ni epitaxial films grown on Cu(001). The O K-edge XMCD results revealed that in the perpendicularly magnetized 10-ML Ni film the orbital moment of CO is parallel to the substrate Ni magnetization, while it is antiparallel in the in-planar magnetized 6-ML and thick (>100 ML) films. The origin of the induced orbital moment at CO is discussed.