Effects of Solvents in the Polyethylene Glycol Series on the Bonding of Copper Joints Using Ag2O Paste

The effects of reducing solvents on the bonding process using silver oxide paste in a copper joint were investigated. Three solvent types were tested: diethylene glycol (DEG), triethylene glycol (TEG), and polyethylene glycol (PEG). The strength of the joints was assessed by fracturing, which occurred at the interface of the copper oxide layer and the copper substrate in DEG and TEG samples and at the bonded interface in the PEG sample. Analysis of the samples revealed that, in the DEG and TEG samples, the copper substrate was oxidized during the bonding process, which compromised the shear strength of the joints. In contrast, the PEG sample exhibited nonuniform sintering of the silver layer while retaining good shear strength. It was found that the combination of DEG and PEG produced optimum shear strength in the copper joint, as PEG suppressed the growth of copper oxide and DEG promoted the formation of a dense sintered silver layer. The bonding strength achieved was higher than that of the gold-to-gold joint made using standard Pb-5Sn solder.     

Continuous-velocity lattice gas cellular automata for miscible binary fluid and its application to simulation of interface instability

Continuous-velocity lattice gas cellular automata (CVLGA) is extended to miscible binary fluid systems. A new parameter is introduced in order to control the diffusivity of the fluids. The correlation between the diffusivity and the new parameter proves that there exists the maximum value of the diffusivity. Quantitative verifications of the model are carried out with numerical simulations of the diffusion phenomena across a falling fluid film. The model is then applied to the simulations of Rayleigh-Taylor instability during the gravitational mixing phenomena. The qualitative tendency of the growth of the interface instability is the same as that obtained in conventional numerical methods.     

AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Experimental characterization of high-speed impact damage behavior in a three-dimensionally woven SiC/SiC composite

This paper discusses high-speed impact damage in a three-dimensionally woven SiC/SiC composite (3D-CMC). The impact damage was introduced by a steel ball projectile in 3D-CMC plates with and without thermal exposure. The surface and internal damages were observed by optical microscopy and X-ray CT. A crater was observed on the collision surface. The X-ray CT measurement revealed that multiple pyramid-shaped cone cracks were generated beneath the crater when the impact speed was relatively low. At an impact speed exceeding the critical speed, a spall fragment was ejected from the back surface, while no internal damage was observed in the fragment. The spall fracture mode differed between the virgin and the thermally-exposed specimens. This difference is the result of embrittlement of the fiber/matrix interface due to oxidation of the carbon coating layer in the thermally-exposed specimen. In addition, it is found that z-yarns improve impact resistance by constraining delamination.     

退火对Inconel718合金氢脆特性的影响

通过实施不同的退火热处理工艺，调整合金中强化相的析出状态，制备具有不同退火状态的几组拉伸试样。对每组试样在未充氢和充氢后按相同的条件进行拉伸试验对该组试样的脆化作用。通过比较不同组试样的脆化表现通过比较未充氢试样和充氢后试样的强度和塑性，评价氢考察退火状态对Inconel 718氢脆倾向的影响。试验结果表明，随着退火程度的加强，强化相体积分数减少，氢引起的塑性损失下降，即抗氢脆性能改善。该结果说明，强化相γ″和γ′对Inconel 718合金的氢脆有促进作用。因此，根据不同工业应用要求，在符合强度要求的前提下，可以通过热处理改善零件的抗氢脆性能。     

Ensemble of Independent Factor Analyzers with Application to Natural Image Analysis

In this paper the ensemble of independent factor analyzers (EIFA) is proposed. This new statistical model assumes that each data point is generated by the sum of outputs of independently activated factor analyzers. A maximum likelihood (ML) estimation algorithm for the parameter is derived using a Monte Carlo EM algorithm with a Gibbs sampler. The EIFA model is applied to natural image data. With the progress of the learning, the independent factor analyzers develop into feature detectors that resemble complex cells in mammalian visual systems. Although this result is similar to the previous one obtained by independent subspace analysis, we observe the emergence of complex cells from natural images in a more general framework of models, including overcomplete models allowing additive noise in the observables.     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Mutants of the nematode Caenorhabditis elegans that are defective specifically in their attraction to cycloheximide

The nematode Caenorhabditis elegans exhibits chemotaxis toward a wide variety of chemicals including water-soluble molecules and volatile organic compounds. We have previously discovered that C. elegans wild-type strain N2 is strongly attracted by cycloheximide which has long been known as a bitter tastant for humans and other mammals. We describe here the isolation and initial characterization of the first mutants which were defective specifically in their attraction to cycloheximide. In our screenings, we selected two mutants that were defective in chemotaxis to cycloheximide but normal in their attraction to NH4Cl and histidine. These mutants also avoided quinine hydrochloride, CuSO4 and high concentrations of NaCl similar to the wild-type strain N2. Furthermore, no observable defect was detected in their attraction to volatile odorants such as isoamyl alcohol and diacetyl. Dye-filling experiments suggested that they have no morphological defect in the sensory endings of the amphid neurons.     

Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins

Natural rubber (NR) was blended in various ratios with 12 kinds of tackifiers that were prepared from petroleum. The blends were heated to various temperatures (20–120°C) to investigate their miscibility. The blends were visually observed for transparency or opacity at each temperature and further observed under an optical microscope for any existence of phase-separated structure. Miscibility of the blends is illustrated as phase diagrams in this article. NR/aliphatic resin systems and NR/aliphatic-aromatic copolymer systems showed phase diagrams of the lower critical solution temperature type, wherein the blends turned faintly cloudy over the binodal curves. The NR/hydrogenated petroleum resin system also showed a phase diagram of the lower critical solution temperature type. The miscible range of a blend system tends to become smaller as the molecular weight of a tackifier increases. Resins prepared by polymerization of pure aromatic monomers were completely immiscible with NR. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 221–229, 1998     

Intake of different eicosapentaenoic acid-containing lipids and fatty acid pattern of plasma lipids in the rats

The ethyl ester of eicosapentaenoic acid (EPA) is the only pure EPA-containing lipid available in bulk for oral administration. However, there is doubt as to whether EPA ethyl ester can efficiently increase the plasma levels of EPA in comparison with the ability of other kinds of EPA-containing lipids to do so. Therefore, two other kinds of EPA-containing lipids were prepared to study the efficiency of oral administration of those lipids for increasing the EPA content in plasma phospholipids and cholesteryl esters. EPA-containing lipids which were investigated were [A], 1,2,3-trieicosapentaenoyl-glycerol, [B] 2-eicosapentaenoyl-phosphatidylcholine and [C] ethyl ester of EPA. An adjusted amount of lipids [A], [B] and [C] was administered to rats through a gastric tube for 4 days (the first experiment) or for 10 days (the second experiment), and the fatty acid composition of plasma phospholipids and cholesteryl esters was determined. In the first experiment, there were no significant differences in the efficiency for increasing EPA levels in either phospholipids or cholesteryl esters among the lipids. In the second experiment, the EPA levels of both plasma phospholipids and cholesteryl esters of rats administered ethyl ester of EPA were significantly higher than those of rats administered 2-eicosapentaenoyl-phosphatidylcholine. The EPA levels of the rats administered 1,2,3-trieicosapentaenoylglycerol were between the levels of the two groups mentioned above, but the differences in the EPA levels were not significant. Although an ethyl ester-type molecule is not a naturally occurring lipid, ethyl ester of EPA is equal to 1,2,3-trieicosapentaenoyl-glycerol and appears to be superior to 2-eicosapentaenoyl-phosphatidylcholine as to the efficiency for increasing EPA levels in total plasma phospholipids and plasma cholesteryl esters.