高速线材轧制用硬质合金轧辊的质量控制

通过对高速线材轧制用硬质合金轧辊 (轧槽 )失效机理的分析 ,提出了高速线材轧制用硬质合金轧辊质量控制的基本方法 ,认为轧辊质量控制的关键在于轧辊材料设计、生产工艺过程控制、轧制过程、轧机工况、轧辊储运装卸以及轧制环境因素的控制 ,并建议尽早制订相关的材料和产品质量标准。     

石脑油型加氢裂化催化剂的研制

采用共沉淀方法合成了石脑油一中氢裂化催化剂。在１００ｍＬ小型加氢装置上，对金属和分子筛含量等因素进行了考察，结果表明，研制的石脑油型加氢裂化催化剂具有初活性反应温度低，活性稳定性好等特点。     

Matrix morphology and fibre pull-out strength of T700/PPS and T700/PET thermoplastic composites

The main objective of this fundamental study was to investigate effects of processing conditions and resulting matrix morphology on interfacial bond strength of fibre reinforced thermoplastic composites. Using a hot stage microscope, single fibre pull-out samples were produced with T700S high strength carbon fibre and two semicrystalline thermoplastic matrices, polyphenylene sulphide (PPS) and polyethylene terephthalate (PET), respectively. Processing temperatures and cooling histories were the major variables in sample preparation. The T700S fibre had no clear effect on the surrounding PPS and PET matrix morphology, as long as direct cooling at constant rates was selected. A transcrystalline phase around the fibres could be induced in the T700S/PPS system, if isothermal crystallization was carried out at 227°C. Fibre pull-out tests were conducted at room temperature and two basic failure paths were observed, i.e. debonding at the fibre-matrix interface and cohesive failure of the matrix close to the fibre surface. The results indicate that slow cooling rate and a resulting coarse spherulitic morphology around the fibres correlate with high interfacial shear strength. In fact somewhat higher strength values were obtained for samples with transcrystalline layers around the fibres.     

Forecasting of Turkey's net electricity energy consumption on sectoral bases

In this study forecast of Turkey's net electricity energy consumption on sectoral basis until 2020 is explored. Artificial neural networks (ANN) is preferred as forecasting tool. The reasons behind choosing ANN are the ability of ANN to forecast future values of more than one variable at the same time and to model the nonlinear relation in the data structure. Founded forecast results by ANN are compared with official forecasts.     

Calendar maintenance of arbitrarily structured systems

A semi-Markov model is constructed that describes an arbitrarily structured multicomponent technological system and takes into account its calendar maintenance. Using an aggregation algorithm, approximate values of stationary reliability characteristics and an optimal term of maintenance work are determined for the system. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 69–86, March–April 2006.     

同心筒发射中旁泄流影响的数值研究

同心筒是一种先进的新型的舰载导弹垂直发射装置。文中采用动网格技术模拟了导弹在同心式发射筒内发射的瞬态过程。探讨了发射过程中旁泄流的产生与消失原因。通过设计内外筒的合理大小可以有效减弱旁泄流的影响。通过大量的数值实验,给出了避免外筒发生雍塞的代数关系式。     

隔壁精馏塔分离芳烃混合物的模拟研究

采用隔壁精馏塔分离苯-甲苯-对二甲苯物系,用Aspen Plus软件模拟了隔壁精馏塔内温度分布及液相组成分布,考察了汽相和液相分配比对产品纯度的影响。对隔壁精馏塔模拟得到的优化操作条件为:隔壁精馏塔的理论板数为30块,侧线采出在第14块理论板,进料段为15块理论板,在进料段的第7块理论板进料,进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1,回流比为8.8,液相分配比为2.96,汽相分配比为0.83。在此条件下,各组分的摩尔分数大于98.5%,与实验结果基本吻合。当进料组成n(苯)∶n(甲苯)∶n(对二甲苯)为1∶3∶1时,采用隔壁精馏塔可比常规两塔流程节能27.18%。     

Fluorescence Anisotropy of Cellular NADH as a Tool to Study Different Metabolic Properties of Human Melanocytes and Melanoma Cells

In this study, we wanted to see if fluorescence anisotropy could be used to detect changes in metabolism in cells with significant light scattering and absorption properties. Fluorescence anisotropy measurements of nicotinamide adenine dinucleotide (NADH) were performed with human melanocytes and melanoma cell lines. To demonstrate the feasibility of using fluorescence anisotropy for detecting metabolic changes, the electron transport chain was blocked using rotenone, inducing an accumulation of intracellular NADH. Total fluorescence increased in all cells as a result of rotenone treatment. Fluorescence anisotropy decreased in the rotenone-treated cells relative to the controls, suggesting an increased ratio of free to protein-bound NADH in the treated cells. In general, the fluorescence anisotropy of the melanocytes was significantly higher than that of the melanoma cell lines. Reflectance spectroscopy showed that the differences in fluorescence anisotropy between the cell types were not due to differences in scattering and absorption properties. Intrinsic cellular NADH fluorescence was experimentally extracted by ratioing polarized fluorescence to polarized reflectance. NADH binding, measured as the ratio of fluorescence intensity at 430 and 465 nm, showed more protein-bound NADH in the melanocytes than in the melanoma cells, consistent with the fluorescence anisotropy measurements.     

Adoption of Technology-Mediated Distance Education: A longitudinal analysis

We investigated the factors that facilitated the fast adoption and utilization of Technology-Mediated Distance Education (TMDE) among higher education institutions. Our analysis was based on a rich data set on the utilization of TMDE between the 1997–1998 and 2000–2001 academic years. The analysis showed that size, public/private status, and location significantly predicted its actual adoption. Being in an urban location negatively affected enrollment in the courses at the undergraduate but not at the graduate level. While the intent to adopt TMDE correlated significantly with actual adoption, many schools that were not interested in TMDE in 1997–1998 adopted it by 2000–2001. Interestingly, late adopters utilized certain technologies as frequently as early adopters, such as synchronous Internet-based instruction and the use of CD-ROMs.     

皂河闸小水电存在问题及改造探讨

针对皂河闸水电站因长期运行造成的机电设备老化、机组效率较低等问题,对3号机进行技术改造。经过调研分析,提出改造方案,并对改造前后的经济效益进行对比分析。表3个。