Comparison of Cell Sizes for Cost Efficient Deployment of a Sensor Network Aided Cognitive Radio System

To exploit spectrum resources on a secondary basis, a Sensor Network Aided Cognitive Radio Network uses a wireless sensor network that assists a secondary cognitive radio network by providing information about the current primary spectrum occupancy. In this paper we determine the performance for different cell sizes when considering the costs for deployment of base stations in a secondary network that exploits spectrum holes identified by the wireless sensor network. The secondary base station is deployed co-located with a mobile primary network that uses a cellular reuse pattern with seven frequencies. Performance of the secondary system and impact on the primary system are mainly studied in terms of throughput, packet loss and coverage when using spectrum holes in the space, time and frequency domains. Especially, we find that the cell size and configured transmit powers for the secondary system are important for optimal system performance, and that smaller cell sizes and less expensive base stations for the secondary system are beneficial. The impact on primary system performance was found to be low, but that optimal tuning of the sensor network is important.     

Effects of level of social contact on dairy calf behavior and health

Housing preweaned dairy calves in pairs rather than individually has been found to positively affect behavioral responses in novel social and environmental situations, but concerns have been raised that close contact among very young animals may impair their health. In previous studies, the level of social contact permitted in individual housing has been auditory, visual, or physical contact. It is unclear how these various levels of social contact compare with each other and to pair housing, when their effects on behavior and health are considered, and whether the timing of pair housing has an effect. To investigate this, 110 Holstein calves (50 males, 60 females) in 11 blocks were paired according to birth date. Within 60 h of birth, each pair of calves was allocated to 1 of 5 treatments: individual housing with auditory contact (I), individual housing with auditory and visual contact (V), individual housing with auditory, visual, and tactile contact (T), pair housing (P), or individual housing with auditory and visual contact the first 2 wk followed by pair housing (VP). At 6 wk of age, calves were subjected to a social test and a novel environment test. In the social test, all pair-housed calves (P and VP) had a shorter latency to sniff an unfamiliar calf than did individually housed calves (I, V, and T), whereas calves with physical contact (T, P, and VP) sniffed the unfamiliar calf for longer than calves on the remaining treatments (I and V). In the novel environment test, calves with physical contact (T, P, and VP) had a lower heart rate, and more of these calves vocalized during the test compared with calves without physical contact (I and V). No effect of treatment was found for clinical scores, levels of the 5 most common pathogens in feces, or in development of serum antibodies against the 3 most common respiratory pathogens. Calves housed individually are more fearful of unfamiliar calves than are pair-housed calves. Contrary to common belief, the allowance of physical contact and pair housing had no effects on the health of the calves.     

Evaluation of non-linear strain paths using Generalized Forming Limit Concept and a modification of the Time Dependent Evaluation Method

The prediction of formability is one of the most important tasks in sheet metal forming process simulation. The common criterion for ductile fracture in industrial applications is the Forming Limit Diagram (FLD). This is only applicable for linear strain paths. However, in most industrial simulation cases non-linear strain paths occur. To resolve this problem, a phenomenological approach is introduced, the so-called Generalized Forming Limit Concept (GFLC). The GFLC enables prediction of localized necking on arbitrary non-linear strain paths. Another possibility is the use of the Time Dependent Evaluation Method (TDEM) within the simulation as a failure criteria. During the Numisheet Benchmark 1 (2014) a two-stage forming process was performed with three typical sheet materials (AA5182, DP600 and TRIP 780) and three different blank shapes. The task was to determinate the point in time and space of local instability. Therefore the strain path for the point of maximum local thinning is evaluated. To predict the start of local necking the Generalized Forming Limit Concept (GFLC), the Time Dependent Evaluation Method (TDEM) and the modified TDEM were applied. The results of the simulation are compared with the results of the Benchmark experiment.     

A TEM study of morphological and structural degradation phenomena in LiFePO4‐CB cathodes

LiFePO₄‐based cathodes suffer from various degradation mechanisms, which influences the battery performance. In this paper, morphological and structural degradation phenomena in laboratory cathodes made of LiFePO₄ mixed with carbon black (CB) in a 1 mol/L LiPF₆ in EC : DMC (1:1 by weight) electrolyte are investigated by transmission electron microscopy at various preparation, assembling, storage, and cycling stages. High‐resolution transmission electron microscopy imaging shows that continuous SEI layers are formed on the LiFePO₄ particles and that both storage and cycling affect the formation. Additionally, loss of CB crystallinity, CB aggregation, and agglomeration is observed. Charge–discharge curves and impedance spectra measured during cycling confirm that these degradation mechanisms reduce the cathode conductivity and capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

Why are Tailored Messages More Effective? A Multiple Mediation Analysis of a Breast Cancer Screening Intervention

Past research has found that tailoring increases the persuasive effectiveness of a message. However, the observed effect has been small and the explanatory mechanism remains unknown. To address these shortcomings, a tailoring software program was created that personalized breast cancer screening pamphlets according to risk, health belief model constructs, and visual preference. Women aged 40 and older (N = 119) participated in a 2 (Tailored vs. Stock Message) × 2 (Charts/Graphs vs. Illustrated Visuals) × 3 (Nested Replications of the Visuals) experiment. Participants provided with tailored illustrated pamphlets expressed greater breast cancer screening intentions than those provided with other pamphlets. In a test of 10 different mediators, perceived message relevance was found to fully mediate the Tailoring × Visual interaction.     

Chemically Synthesized 58‐mer LysM Domain Binds Lipochitin Oligosaccharide

Recognition of carbohydrates by proteins is a ubiquitous biochemical process. In legume–rhizobium symbiosis, lipochitin oligosaccharides, also referred to as nodulation (nod) factors, function as primary rhizobial signal molecules to trigger root nodule development. Perception of these signal molecules is receptor mediated, and nod factor receptor 5 (NFR5) from the model legume Lotus japonicus is predicted to contain three LysM domain binding sites. Here we studied the interactions between nod factor and each of the three NFR5 LysM domains, which were chemically synthesized. LysM domain variants (up to 58 amino acids) designed to optimize solubility were chemically assembled by solid‐phase peptide synthesis (SPPS) with microwave heating. Their interaction with nod factors and chitin oligosaccharides was studied by isothermal titration calorimetry and circular dichroism (CD) spectroscopy. LysM2 showed a change in folding upon nod factor binding, thus providing direct evidence that the LysM domain of NFR5 recognizes lipochitin oligosaccharides. These results clearly show that the L. japonicus LysM2 domain binds to the nod factor from Mesorhizobium loti, thereby causing a conformational change in the LysM2 domain. The preferential affinity for nod factors over chitin oligosaccharides was demonstrated by a newly developed glycan microarray. Besides the biological implications, our approach shows that carbohydrate binding to a small protein domain can be detected by CD spectroscopy.     

Membrane treatment of side-stream cooling tower water for reduction of water usage

A pilot study was conducted to determine whether membrane treatment on a side stream of recirculating cooling-tower water could reduce overall water usage and discharge. The treated permeate was returned to the cooling tower while the concentrate was discharged to the sanitary sewer. Flow rates, pressures and water chemistry were monitored. The pilot demonstrated potential substantial water savings. Maximum make-up water and discharge reduction were 16% and 49%, respectively. As high as possible permeate recovery is needed to maximize water conservation. Silica scaling on the membranes limited water savings in this pilot. Development of membranes with a solute-rejection capacity less than the 92% average of the membranes used in the pilot would assist in optimizing water savings. Decreased water outlays compensated for the additional energy used by membrane treatment. Scaling control is critical for economic operation.     

Optimization of bistable viscoelastic systems

We consider the flow of a viscoelastic fluid in a symmetric cross geometry. For small driving pressures the flow is symmetric, but beyond a certain critical pressure the symmetric flow becomes unstable; two stable asymmetric solutions appear, and forcing of the unstable symmetric flow beyond the critical pressure gives rise to increased hydraulic resistance. We have combined a state-of-the-art implementation for viscoelastic flow modeling with topology optimization in a high level finite element package (COMSOL). We use this framework on the cross geometry with the aim to reduce the critical driving pressure corresponding to the point of bistability, such that the effect is enhanced. The point of bistability is, however, not explicitly contained in the solution, so we opt for a heuristic approach based on the dissipation ratio between the asymmetric and unstable symmetric flow solutions. We find a design that significantly reduces the driving pressure required for bistability, and furthermore is in agreement with the approach followed by experimental researchers. Furthermore, by comparing the two asymmetric solutions, we succesfully apply the same approach to a problem with two fluids meeting in the cross.