A Parallel Hill Climbing Algorithm for Pushing Dependent Data in Clients–Providers–Servers Systems

The up-link bandwidth in satellite networks and in advanced traffic wireless information system is very limited. A server broadcasts data files provided by different independent providers and accessed by many clients in a round-robin manner. The clients who access these files may have different patterns of access. Some clients may wish to access several files in any order (AND), some wish to access one out of several files (OR), and some clients may access a second file only after accessing another file (IMPLY). The goal of the server is to order the files in a way that minimizes the access time of the clients given some a priori knowledge of their access patterns. An appropriate clients–servers model was recently proposed by Bay-Noy, Naor and Schieber. They formulated three separate problems and proposed an algorithm that evaluates certain number of random permutations and chooses the one whose access time is minimized. In this paper, we formulate a combined AOI (AND-OR-IMPLY) problem, and propose to apply a parallel hill climbing algorithm (to each of the four problems), which begins from certain number of random permutations, and then applies hill climbing technique on each of them until there is no more improvement. The evaluation time of neighboring permutations generated in hill climbing process is optimized, so that it requires O(n) time per permutation instead of O(n ²) time required for evaluating access time of a random permutation, where n is the number of files the server broadcasts. Experiments indicate that the parallel hill climbing algorithm is O(n) times faster that random permutations method, both in terms of time needed to evaluate the same number of permutations, and time needed to provide a high quality solution. Thus the improvement is significant for broadcasting large number of files.     

Veal colour assessment with three wavelengths

A method to derive reflectance spectra and colour coordinates of meat by measurement of reflectance at only three wavelengths, 480, 570 and 620 nm has been developed, by treating the spectra of a meat sample as a linear combination of the spectra of the three major myoglobin derivatives (reduced myoglobin, oxymyoglobin and metmyoglobin). Applied to 300 samples of Semitendinosus and Longissimus dorsi veal muscles at different times post mortem (24 h to 9 d), colour differences ΔE (?) between the derived spectra and the real ones were about 1.5 units. The total pigment content, with high correlation with the extraction method (P < 0.02), and the relative proportions of the derivatives can also be estimated.     

In Situ Liquid-Cell TEM Observation of Multiphase Classical and Nonclassical Nucleation of Calcium Oxalate

Calcium oxalate (CaOx) is the major phase in kidney stones and the primary calcium storage medium in plants. CaOx can form crystals with different lattice types, water contents, and crystal structures. However, the conditions and mechanisms leading to nucleation of particular CaOx crystals are unclear. Here, liquid-cell transmission electron microscopy and atomistic molecular dynamics simulations are used to study in situ CaOx nucleation at different conditions. The observations reveal that rhombohedral CaOx monohydrate (COM) can nucleate via a classical pathway, while square COM can nucleate via a non-classical multiphase pathway. Citrate, a kidney stone inhibitor, increases the solubility of calcium by forming calcium-citrate complexes and blocks oxalate ions from approaching calcium. The presence of multiple hydrated ionic species draws additional water molecules into nucleating CaOx dihydrate crystals. These findings reveal that by controlling the nucleation pathways one can determine the macroscale crystal structure, hydration state, and morphology of CaOx.     

A layer radiowave absorber based on double-period lattices of resistive squares

A radiowave-absorbing composite material based on double-period lattices of resistive squares is considered. Methods of the electric circuit and long line theories are applied to obtain expressions for the estimate of the effective permittivity of such a composite. It is shown that the frequency dependence of the effective permittivity of the realized composite is close to the relaxation value. The reflection characteristics of a radiowave absorber based on a composite with double-period lattices of resistive squares are investigated. It is found that, for such a radiowave absorber, the ratio of the difference of the extreme wavelengths of its operating band (corresponding to the minus-10-dB reflection level) to the thickness of the radiowave absorber is within an interval of 4.2–4.5.     

An 8-Bit Digitally Controlled Programmable Phase Shifter Circuit for Sinusoidal Signals with 252∘ Phase Control Range

In this paper, the synthesis, design, and implementation of a programmable phase shifter circuit for sinusoidal signals is presented. The proposed circuit, built-up herein with operational amplifiers (OPAMPs), high precision resistors and low voltage switches, consists of a digitally controlled amplitude attenuator in combination with a single-tone orthogonalizer. Experimental results agree with theoretical background: the attained phase range was 252^° in 256 steps with a median step of 0.9^°. The inaccuracy of the circuit was determined to be of 0.03 %. Contrary to other OPAMP approaches for sinusoidal signals reported in the literature and based on a first-order all-pass filter structure, the approximation suggested in this work is based on a different concept. The achieved results demonstrate the functionality of the system for the case of a sinusoidal signal with frequency of 1 kHz. Notwithstanding, the proposed architecture can be extended to operate at higher frequencies by using different building blocks with larger bandwidth. Furthermore, it can be extended as well to work out with other periodic input waveforms, like triangular shapes or square waves, with the use of an appropriate orthogonalizer.     

Exploration of Electrochemical Reactions at Organic–Inorganic Halide Perovskite Interfaces via Machine Learning in In Situ Time‐of‐Flight Secondary Ion Mass Spectrometry

The instability of hybrid organic–inorganic perovskite (HOIP) devices is one of the significant challenges preventing commercialization. Exploring these phenomena is severely limited by the complexity of the intrinsic electrochemistry of HOIPs, the presence of multiple volatile and mobile ionic species, and the possible role of environmentally induced reactions at surfaces and triple‐phase junctions. Here, in situ studies of the electrochemistry of methylammonium lead bromide perovskite with the Au electrode interface are reported via light‐ and voltage‐dependent time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) imaging of lateral perovskite heterostructures. While ToF‐SIMS allows for the visualization of the chemical composition along the surface and its evolution with light and electrical bias, the interpretation of the multidimensional data obtained is often limited due to strong correlations between chemical signatures and the need to track multiple peaks at once. Here, a machine learning workflow combining the Hough transform and non‐negative matrix factorization and non‐negative tensor decomposition is developed to avoid this limitation and extract salient features of associated chemical changes and to separate the light‐ and voltage‐dependent dynamics. Combining these in situ characterizations and the machine learning workflow provides comprehensive information on the chemical nature of moving species, ion accumulation, and interfacial electrochemical reactions in HOIP devices.     

Phosphotungstic acid-iron-haematoxylin staining method for osteoid, boundary bone and bone components in paraffin sections.

A new staining technique which stains osteoid and bone tissue differentially and also demonstrates boundary bone, pathological osteoid and the changes in ageing, pathological and dead bone matrix in decalcified paraffin or low-viscosity-nitrocellulose bone sections was developed. This phosphotungstic acid-iron-haematoxylin (PTAIH) method is based on pretreating the sections with phosphotungstic acid followed by an iron alum mordant and staining in haematoxylin with subsequent timed differentiation, at certain stages of which the features listed above appear. Van Gieson's picrofuchsin is then used as a counterstain. After standard differentiation osteoid appears red in sharp contrast with the black bone, young and woven bone, old and lamellar bone, and allows one to demonstrate changes in stainability of diseased osteoid and bone matrix, and dead bone. With the differentiation done individually and interrupted at certain stages it is possible to distinguish between various bone components depending on the amount and quality of their in vivo mineralisation. Comparison with controls showed that in this respect the method is more sensitive than the curremt staining techniques of undecalcified bone sections since it demonstrates not only unmineralised and fully mineralised tissues but also shows the poorly calcified, demineralised and ill-calcified bone components. The advantages of the method compared with those using undecalcified sections are its simplicity, suitability for fixed and decalcified material in any unspecialised histological laboratory and the fact that osteoid and other bone components can be studied in sections of unlimited size and in undisturbed relationship to their surrounding soft tissues.     

A Switched Opamp-Based Bandpass Filter: Design and Implementation in a 0.35 μm CMOS Technology

A fully differential SC bandpass filter (central frequency, 58 kHz; Q = 15; and voltage gain, 8) based on the switched-opamp approach is designed and implemented in this work. The filter operates from a single 1 V supply voltage and is realized in a 0.35 m CMOS technology. It has been characterized with a sampling frequency of 1 MHz and its power consumption is about 230 W. As a main internal filter component, an appropiate switched opamp was also designed. Its common-mode feedback circuit was implemented by using an error amplifier and sampling of the output common-mode voltage is carried out by applying a DC offset to level shift the common-mode sample. It provides an accurate common-mode output for a wide temperature and supply voltage ranges.     

MEG forward problem formulation using equivalent surface current densities

We present a formulation for the magnetoencephalography (MEG) forward problem with a layered head model. Traditionally the magnetic field is computed based on the electric potential on the interfaces between the layers. We propose to express the effect of the volumetric currents in terms of an equivalent surface current density on each interface, and obtain the magnetic field based on them. The boundary elements method is used to compute the equivalent current density and the magnetic field for a realistic head geometry. We present numerical results showing that the MEG forward problem is solved correctly with this formulation, and compare it with the performance of the traditional formulation. We conclude that the traditional formulation generally performs better, but still the new formulation is useful in certain situations.