Factors Influencing Rapid Detection of Bioaerosols by Surface Plasmon Resonance-Based Technique

In bioaerosol monitoring applications, technologies allowing rapid and precise detection of airborne pathogens are highly demanded. One of such technologies, based on the immunoreaction-operating principle in nearly real-time mode without any specific labeling, is known as surface plasmon resonance (SPR). In previous studies, we have shown applicability of the SPR technology for rapid and selective detection of viral and bacterial aerosols where successful combination of the SPR machine with our earlier produced personal bioaerosol sampler opened new prospects in development of portable bioaerosol monitors. The current study is a logical continuation of our previous research dedicated to the technology development for rapid bioaerosol detection. Here, we focus on one of the main factors possibly influencing the SPR-based bioaerosol monitoring; the SPR performance on target bioaerosol detection was evaluated at conditions of substantial air contamination with different nontargeted microorganisms, commonly presented in the air. Besides, different compositions of sampling liquids were tested in regards to the SPR results interference. Our findings clearly verified high specificity of the technology even in cases of highly contaminated air environments with aerosols of biological and mineral origins. It was found that both nontargeted bioaerosols and nanosized aerosols of mineral background do not have significant influence on the specific SPR detection of targeted bioaerosols.

Copyright 2014 American Association for Aerosol Research     

Small diameter tubular structure design using solvent‐free textile techniques

The aim of research was to elaborate the non‐biodegradable (made of polypropylene (PP)) and resorbable (made of polylactide (PLA)) tubular fibrous structures for the reconstruction of the vascular vessels. For the mentioned structures design, nonconventional manufacturing techniques such as melt blown, melt electrospinning, and melt electroblowing were used. Three techniques were chosen as methods allowing on the fibrous structures manufacture containing fibers in nano‐ or submicro‐size diameter. Other advantages of free‐solvent technique use is the reduction in the clinical adverse events associated with solvent resided in the fibrous structure during the fabrication. The tubular fibrous structures of PP and PLA using above‐mentioned techniques were designed. In first stage, the analysis of the processing parameters influence on the nonbiodegradable and biodegradable tubular structures fiber diameter was performed. Subsequently, the validation step was the analysis of the influence of processing parameters on PP and PLA structural properties for each manufacturing techniques was investigated. The research results confirmed the ability of the tubular structures manufacture with various fiber diameter depending on the applied technique and processing parameters. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40147.     

Using light to control the interactions between self-rotating assemblies of active gels

Polymer gels undergoing the oscillating Belousov-Zhabotinsky (BZ) reaction exhibit an autonomous, periodic swelling and deswelling, where the mechanical oscillations are driven by the chemical reaction within the polymer network. Using computer simulations, we show that these BZ gels can undergo a form of auto-chemotaxis, enabling the gels to spontaneously move in response to self-generated chemical gradients. Focusing on four millimeter-sized pieces of these BZ gels, we show that the pieces can organize into self-rotating clusters that resemble a moving pinwheel or gear. By analyzing the factors that promote the formation of a single self-rotating cluster, we attempt to design systems of multiple, interacting gears. We show that light, which suppresses the oscillations of the gels, can be harnessed to promote the formation of two self-rotating clusters. These studies point to a novel form of photo-chemo-mechanical transduction, where light is utilized to control the conversion of chemical and mechanical energy in the system. Moreover, the interaction between the BZ gel gears reveals a new form of entrainment between these moving units. Namely, their coordinated motion is achieved through chemical coupling or communication, rather than a mechanical coupling. These findings can lead to the formation of chemically “communicating” devices that can be programmed to perform autonomous work through the use of light.     

Molecularly imprinted poly(acrylonitrile‐co‐acrylic acid) matrix with sclareol

There are presented results regarding a new set of molecularly imprinted polymers (MIPs) based on acrylonitrile:acrylic acid (AN:AA) copolymer matrix. As template, it was used sclareol, an important anticancer bioactive compound, never used before for molecular imprinting. An emerging and insufficient studied MIP preparation method, namely the phase inversion, was used to prepare 0.8 mm spherical sclareol MIPs (S‐MIPs). Three AN:AA copolymers, having the initial monomer ratios 90:10, 80:20, and 70:30, were synthesized by radical copolymerization in emulsion, without emulsifier. After that, each copolymer was dissolved in the presence of the template (sclareol) in dimethylformamide. The imprinting and the morphology of these new materials were analyzed by rheology, elemental analysis, infrared spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, batch rebinding tests, and Scatchard analysis. The conclusion was that the AN:AA‐80:20 matrix proved to be the optimized solution between high rigidity (given by the AN segments) and high affinity for the template (given by AA segments), the average imprinting factor for this system being 2.67. POLYM. ENG. SCI., 54:1484–1494, 2014. © 2013 Society of Plastics Engineers     

A process for the complete fractionation of baker's yeast

A process for the preparation of yeast-derived food additives was developed. The four products obtained, yeast protein concentrate (YPC), cell-wall protein (CWP), semi-pure glucomannan (SPG) and yeast extract, compared well with similar products, present in the current market, with respect to functional properties. YPC and CWP exhibited improved water-holding and oil-binding properties over those of soy-protein isolate (SPI). The emulsifying capacity was very close to that observed in commercial samples. A one-step alkaline extraction enhanced the functional properties of primary yeast glycan to match traditional food hydrocolloid sources. SPG showed oil-binding properties significantly greater than commercial glucomannan.     

From miRNA Target Gene Network to miRNA Function: miR-375 Might Regulate Apoptosis and Actin Dynamics in the Heart Muscle via Rho-GTPases-Dependent Pathways

MicroRNAs (miRNAs) are short, single-stranded, non-coding ribonucleic acid (RNA) molecules, which are involved in the regulation of main biological processes, such as apoptosis or cell proliferation and differentiation, through sequence-specific interaction with target mRNAs. In this study, we propose a workflow for predicting miRNAs function by analyzing the structure of the network of their target genes. This workflow was applied to study the functional role of miR-375 in the heart muscle (myocardium), since this miRNA was previously shown to be associated with heart diseases, and data on its function in the myocardium are mostly unclear. We identified PIK3CA, RHOA, MAPK3, PAFAH1B1, CTNNB1, MYC, PRKCA, ERBB2, and CDC42 as key genes in the miR-375 regulated network and predicted the possible function of miR-375 in the heart muscle, consisting mainly in the regulation of the Rho-GTPases-dependent signaling pathways. We implemented our algorithm for miRNA function prediction into a Python module, which is available at GitHub.     

eDNA Inactivation and Biofilm Inhibition by the PolymericBiocide Polyhexamethylene Guanidine Hydrochloride (PHMG-Cl)

The choice of effective biocides used for routine hospital practice should consider the role of disinfectants in the maintenance and development of local resistome and how they might affect antibiotic resistance gene transfer within the hospital microbial population. Currently, there is little understanding of how different biocides contribute to eDNA release that may contribute to gene transfer and subsequent environmental retention. Here, we investigated how different biocides affect the release of eDNA from mature biofilms of two opportunistic model strains Pseudomonas aeruginosa ATCC 27853 (PA) and Staphylococcus aureus ATCC 25923 (SA) and contribute to the hospital resistome in the form of surface and water contaminants and dust particles. The effect of four groups of biocides, alcohols, hydrogen peroxide, quaternary ammonium compounds, and the polymeric biocide polyhexamethylene guanidine hydrochloride (PHMG-Cl), was evaluated using PA and SA biofilms. Most biocides, except for PHMG-Cl and 70% ethanol, caused substantial eDNA release, and PHMG-Cl was found to block biofilm development when used at concentrations of 0.5% and 0.1%. This might be associated with the formation of DNA–PHMG-Cl complexes as PHMG-Cl is predicted to bind to AT base pairs by molecular docking assays. PHMG-Cl was found to bind high-molecular DNA and plasmid DNA and continued to inactivate DNA on surfaces even after 4 weeks. PHMG-Cl also effectively inactivated biofilm-associated antibiotic resistance gene eDNA released by a pan-drug-resistant Klebsiella strain, which demonstrates the potential of a polymeric biocide as a new surface-active agent to combat the spread of antibiotic resistance in hospital settings.     

Effect of Diffusion Length in Modeling of Equiaxed Dendritic Solidification under Buoyancy Flow in a Configuration of Hebditch–Hunt Experiment

Metallurgical and Materials Transactions B - Modeling of equiaxed solidification is vital for understanding the solidification process of metallic alloys. In this work, an extended literature...