Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

High‐Performance,Monolithic Polyaniline Electrochemical Actuators

New polyaniline (PANI) asymmetric membranes were fabricated using a phase‐inversion technique with hexane as the coagulation bath. These membranes exhibit a dense structure with macrovoids distributed asymmetrically throughout the cross‐section. A stress–strain study demonstrated that the Young's modulus (1.421 GPa) and strain at break (7.6 %) of the new PANI asymmetric membranes prepared from hexane are approximately 12 and 4 times higher, respectively, than the values reported previously for the PANI integrally skinned asymmetric membranes (ISAMs) (123 MPa Young's modulus and 1.8 % strain at break). Furthermore, monolithic electrochemical actuators based on a single PANI asymmetric membrane were constructed, and a bending movement of up to 20 Hz was experimentally recorded in a hydrochloric acid aqueous solution. A lifetime of over 329 500 cycles was determined for these actuators at a ± 2° angular displacement (5 Hz). The lifetime is limited by a bending fatigue that creates a transversal crack on the PANI membrane at the air–water interface. Control over the actuator movement is also manifested by the linear dependences of the bending angle on the charge and of the angular velocity on the current. These relationships are independent of both the kind of applied electric signal and the frequency used.     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Long-term follow-up of immunosuppressive treatment for obstructive airways disease after allogeneic bone marrow transplantation

BACKGROUND: Locally advanced thyroid cancer invading the tracheal cartilage represents a difficult treatment dilemma during thyroidectomy. METHODS: A retrospective chart review was performed to determine the results of laryngotracheal resection or tracheal cartilage shave with adjuvant radiotherapy in patients with locally advanced thyroid cancer invading the upper airway. RESULTS: Of 597 patients undergoing thyroidectomy for thyroid cancer, 40 were found to have laryngotracheal invasion. Thirty-five patients with superficial invasion underwent cartilage shave procedures with adjuvant radiotherapy; five with full-thickness invasion underwent radical resection, including tracheal sleeve resection (n = 3) or total laryngectomy (n = 2). Histologic subtypes included papillary (n = 32), follicular (n = 2), Hurthle cell (n = 1), medullary (n = 3), and anaplastic (n = 2). Of the cartilage shave group, 25 are currently alive with no evidence of disease at a mean follow-up of 81 months (range 1-290). Six developed isolated local/regional recurrence and were managed with total laryngectomy (n = 1), tracheal resection (n = 1), cervical lymphadenectomy (n = 1), or repeat radiotherapy (n = 3). All six patients remain free of disease at a mean follow-up of 5 years. Of those who underwent initial laryngotracheal resection, four remain free of disease at a mean follow-up of 5 years. The rates of 10-year disease-free survival and overall survival for all patients were 47.9% (95% confidence interval [CI] 24.8, 71.0) and 83.9% (95% CI 70.3, 97.5), respectively. CONCLUSIONS: These data suggest that adequate management of thyroid cancer with laryngotracheal invasion can be achieved with a more conservative surgical approach and adjuvant radiotherapy, reserving more radical resections for extensive primary lesions or locally recurrent disease.     

On the interpretation of phase diagram of La2−x(Ba,Sr)x;CuO4

It is shown that the features of La_2–x(Ba,Sr)_xCuO₄ around x=0.125 can be. treated as a consequence of alternate-layer doping when doped holes are added to each second CuO₂ plane. The model of heterovalence doping of high-T_c superconductors (HTSC) is proposed to account for the evolution of HTSC properties with doping. According to this model the transition from insulator to metal state under doping proceeds through the stage of-U-centers formation, which arise when the definite spatial arrangement of the doping atoms is realized.     

Identification and characterization of the murine homologue of CD22, a B lymphocyte-restricted adhesion molecule

The human B lymphocyte-specific Ag, CD22, is a cell adhesion molecule expressed on the surface during a narrow window of B cell development, coincident with surface IgD. A ligand for CD22 has recently been identified on human T cells as the low molecular mass isoform of the leukocyte common Ag, CD45RO. CD22 has been reported to function in the regulation of both T and B cell activation in vitro. In this study, we report the isolation and expression of a molecular cDNA clone encoding the murine homologue of CD22, mCD22. Within their predicted protein sequences, murine and human sequences overall have 62% identity, which includes 18 of 20 extracellular cysteines and six of six cytoplasmic tyrosines. BHK cells transfected with mCD22 cDNA specifically adhere to resting and activated T lymphocytes and in addition bound activated, but not resting, B cells. Five Th clones were analyzed for their ability to adhere to mCD22; two Th0 clones and one Th1 clone bound CD22+ BHK transfectants, but not all T cell clones bound CD22+ cells: another Th1 clone and a Th2 clone did not. mCD22+ BHK transfectants were also specifically bound by the B cell-specific mAb, NIM-R6, demonstrating that this mAb is specific for murine CD22. Human cell lines expressing the counter-receptors for human CD22 were also examined for adhesion to the murine CD22 homologue; the epitope responsible for B cell adhesion to CD22 is conserved, whereas the T cell epitope binding to CD22 is not. The cDNA and mAb to murine CD22 will be useful for defining the in vivo function of CD22.     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

From information to probability: An axiomatic approach—Inference is information processing

We define the very rich language of composed conditionals on a three‐valued logic and use this language as the communication tool between man and machine. Communication takes place for three reasons: knowledge acquisition, query, and response. Learning, thinking, and answering questions are of a pure information theoretical nature. The pivot of this knowledge processing concept is the amount of information (bit) we receive if a conditional becomes true. We follow an axiomatic approach to information theory rather than the classical probabilistic approach of Shannon; information comes first, and then comes probability. In the light of this philosophy, query and response experience new interpretations. Both, acquisition and response are realized by maximizing entropy and minimizing relative entropy, respectively. The iterative solution of these mathematical optimization problems gives new insights into the adaptation of prior knowledge to new information. Our expert system shell SPIRIT supports this kind of knowledge processing, which will be established by suitable examples. © 2003 Wiley Periodicals, Inc.