Study of Complete Thermoelectric Generator Behavior Including Water-to-Ambient Heat Dissipation on the Cold Side

Reduction of the thermal resistances of the heat exchangers of a thermoelectric generation (TEG) system leads to a significant increase in TEG efficiency. For the cold side of a thermoelectric module (TEM), a wide range of heat exchangers have been studied, from simple finned dissipators to more complex water (water–glycol) heat exchangers. As the Nusselt number is much higher in water heat exchangers than in conventional air finned dissipators, the convective thermal resistances are better. However, to conclude which heat exchanger leads to higher efficiencies, it is necessary to include the whole system involved in the heat dissipation, i.e., the TEM-to-water heat exchanger, the water-to-ambient heat exchanger, as well as the required pumps and fans. This paper presents a dynamic computational model able to simulate the complete behavior of a TEG, including both heat exchangers. The model uses the heat transfer and hydraulic equations to compute the TEM-to-water and water-to-ambient thermal resistances, along with the resistance of the hot-side heat exchanger at different operating conditions. Likewise, the model includes all the thermoelectric effects with temperature-dependent properties. The model calculates the net power generation for different configurations, providing a methodology to design and optimize the heat exchange in order to maximize the net power generation for a wide variety of TEGs.     

Effect on Ordering of the Growth of GaInP Layers on (111)-GaAs Faces

GaInP, an essential material for multijunction structures of III–V compounds for solar cells, can achieve better photovoltaic responses when grown on (111)GaAs faces, due to the large internal electric fields generated by the off-diagonal strain. In this work, we explored metalorganic chemical vapor deposition growth of GaInP layers on (001)-, (111)Ga-, and (111)As-GaAs substrates, using different phosphine flow rates. The structural and optical properties of the layers have been studied by micro-Raman spectroscopy, microphotoluminescence, and cathodoluminescence. Problems such as composition control, growth rate, and the presence of ordered phases are addressed.     

New Approach to Inter‐domain Multicast Protocols

IPTV broadcast channels and video content distribution are increasingly saturating network paths. New solutions based on inter‐domain multicast protocols could contribute to the enhancement of multimedia content distribution over the Internet. The aim of this paper is to propose new capabilities for an existing inter‐domain multicast protocol, the Protocol Independent Multicast‐Sparse Mode. We describe the modified protocol and analyze its behavior using newly developed tools based on an open‐source software simulator. The resulting protocol does not require topology information, which is advantageous for easier deployment. In addition, the adopted solution avoids inherent problems with inter‐domain multicast routing, such as multiple paths and path asymmetries.     

Dye‐Doped Polyhedral Oligomeric Silsesquioxane (POSS)‐Modified Polymeric Matrices for Highly Efficient and Photostable Solid‐State Lasers

Here, the design, synthesis, and characterization of laser nanomaterials based on dye‐doped methyl methacrylate (MMA) crosslinked with octa(propyl‐methacrylate) polyhedral oligomeric silsesquioxane (8MMAPOSS) is reported in relation to their composition and structure. The influence of the silicon content on the laser action of the dye pyrromethene 567 (PM567) is analyzed in a systematic way by increasing the weight proportion of POSS from 1 to 50%. The influence of the inorganic network structure is studied by replacing the 8MMAPOSS comonomer by both the monofunctionalized heptaisobutyl‐methacryl‐POSS (1MMAPOSS), which defines the nanostructured linear network with the POSS cages appearing as pendant groups of the polymeric chains, and also by a new 8‐hydrogenated POSS incorporated as additive to the polymeric matrices. The new materials exhibit enhanced thermal, optical, and mechanical properties with respect to the pure organic polymers. The organization of the molecular units in these nanomaterials is studied through a structural analysis by solid‐state NMR. The domain size of the dispersed phase assures a homogeneous distribution of POSS into the polymer, thus, a continuous phase corresponding to the organic matrix incorporates these nanometer‐sized POSS crosslinkers at a molecular level, in agreement with the transparency of the samples. The silicon–oxygen core framework has to be covalently bonded into the polymer backbone instead of being a simple additive and both the silica content and crosslinked degree exhibit a critical influence on the laser action.     

A wavelet-based ECG delineator: evaluation on standard databases

In this paper, we developed and evaluated a robust single-lead electrocardiogram (ECG) delineation system based on the wavelet transform (WT). In a first step, QRS complexes are detected. Then, each QRS is delineated by detecting and identifying the peaks of the individual waves, as well as the complex onset and end. Finally, the determination of P and T wave peaks, onsets and ends is performed. We evaluated the algorithm on several manually annotated databases, such as MIT-BIH Arrhythmia, QT, European ST-T and CSE databases, developed for validation purposes. The QRS detector obtained a sensitivity of Se = 99.66% and a positive predictivity of P+ = 99.56% over the first lead of the validation databases (more than 980,000 beats), while for the well-known MIT-BIH Arrhythmia Database, Se and P+ over 99.8% were attained. As for the delineation of the ECG waves, the mean and standard deviation of the differences between the automatic and manual annotations were computed. The mean error obtained with the WT approach was found not to exceed one sampling interval, while the standard deviations were around the accepted tolerances between expert physicians, outperforming the results of other well known algorithms, especially in determining the end of T wave.     

Methodological principles of T wave alternans analysis: a unified framework

Visible T wave alternans (TWA) in the electrocardiogram (ECG) had been regarded as an infrequent phenomenon during the first 80 years of electrocardiography. Nevertheless, computerized analysis changed this perception. In the last two decades, a variety of techniques for automatic TWA analysis have been proposed. These techniques have allowed researchers to detect nonvisible TWA in a wide variety of clinical and experimental conditions. Such studies have recently shown that TWA is related to cardiac instability and increased arrhythmogenicity. Comparison of TWA analysis methods is a difficult task due to the diversity of approaches. In this paper, we propose a unified framework which holds the existing methods. In the light of this framework, the methodological principles of the published TWA analysis schemes are compared and discussed. This framework may have an important role to develop new approaches to this problem.     

Room Temperature Spin-Phonon Coupling in Cr2O3 Nanocrystals

In this study, nanocrystals of antiferromagnetic Cr₂O₃ are shown via Raman spectroscopy to display peculiar lattice dynamics in terms of phonon softening and the occurrence of an exceptionally strong spin-phonon coupling. This effect, which is observed to persist well above the onset of the antiferromagnetic ordering temperature, is ascribed to locally correlated spin fluctuations due to the modulation of the magnetic exchange interactions as the chromium atoms oscillate about their equilibrium position. It is found that the spin-phonon coupling strength is governed by the competing antiferromagnetic and ferromagnetic interactions, where changes in the surface spin configuration can also play a crucial role. Overall, this work proves the size dependence of the interplay between the crystalline and magnetic structures in 3D antiferromagnets varying the surface-to-volume ratio and helps establish the fundamentals for a spin-phonon coupling engineering at the nanoscale via a simple route in a very stable and easy to synthesize material. More importantly, it demonstrates the possibility of coupling phononic excitations with the magnetization dynamics at room temperature, offering a highly prospective nanomaterial for the design of novel magnonic devices.     

Superparamagnetic Twist‐Type Actuators with Shape‐Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications

Directed nanoparticle self‐organization and two‐photon polymerization are combined to enable three‐dimensional soft‐magnetic microactuators with complex shapes and shape‐independent magnetic properties. Based on the proposed approach, single and double twist‐type swimming microrobots with programmed magnetic anisotropy are demonstrated, and their swimming properties in DI‐water are characterized. The fabricated devices are actuated using weak rotating magnetic fields and are capable of performing wobble‐free corkscrew propulsion. Single twist‐type actuators possess an increase in surface area in excess of 150% over helical actuators with similar feature size without compromising the forward velocity of over one body length per second. A generic and facile combination of glycine grafting and subsequent protein immobilization exploits the actuator's increased surface area, providing for a swimming microrobotic platform with enhanced load capacity desirable for future biomedical applications. Successful surface modification is confirmed by FITC fluorescence.