Spectroscopic and thermal studies of poly[(N‐vinylimidazole)‐co‐(maleic acid)] hydrogel and its quaternized form

BACKGROUND: In this study, poly[(N‐vinylimidazole)‐co‐(maleic acid)] (poly(VIm/MA)) hydrogels were prepared by γ‐irradiation of ternary mixtures of N‐vinylimidazole–maleic acid–water using a ⁶⁰Co γ‐source. Spectroscopic and thermal analyses of these hydrogels as a function of protonation showed that the results are consistent with the existence of an H‐bridged complex when the imidazole rings are partially protonated. Finally, the efficiency and binding trends of Cu²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions with both protonated and unprotonated poly(VIm/MA) hydrogels were determined. RESULTS: Gelation of 90% was reached at around 180 kGy dose at the end of irradiation. The poly(VIm/MA) hydrogels synthesized were further protonated in HCl solutions with different concentrations. Hydrogels originally showed 450% volumetric swelling; this ratio reached 1900% after protonation at pH = 5.0. Fourier transform infrared spectral changes in the ⁺N? H stretching region (3200–3600 and 1173 cm^?1) and the ring mode deformation at 915 cm^?1 are consistent with the formation of an H‐bridged complex between the protonated and unprotonated imidazole rings upon partial protonation. Similar changes were obtained from NMR spectra of both the protonated and unprotonated forms of the hydrogels. CONCLUSION: Protonated and unprotonated hydrogels have been used in heavy metal ion adsorption studies for environmental purposes. Adsorption decreased with decreasing pH value due to the protonation of the VIm ring. The adsorption of Me²⁺ ions decreased in the order Cu²⁺ > Co²⁺ > Cd²⁺ > Pb²⁺, which is related to the complexation stability as well as the ionic radius of the metal ions. These results show that P(VIm/MA) hydrogels can be used efficiently to remove heavy metal ions from aqueous solutions. However, the protonated form is a bad choice for heavy metal ion adsorption due to electrostatic repulsion forces; it can nevertheless be assumed to be a good choice for anion adsorption from environmental waste water systems. Copyright © 2007 Society of Chemical Industry     

Fast Computation of the Acoustic Field for Ultrasound Elements

A fast method for computing the acoustic field of ultrasound transducers is presented with application to rectangular elements that are cylindrically focused. No closed-form solutions exist for this case but several numerical techniques have been described in the ultrasound imaging literature. Our motivation is the rapid calculation of imaging kernels for physics-based diagnostic imaging for which current methods are too computationally intensive. Here, the surface integral defining the acoustic field from a baffled piston is converted to a 3-D spatial convolution of the element surface and the Green's function. A 3-D version of the overlap-save method from digital signal processing is employed to obtain a fast computational algorithm based on spatial Fourier transforms. Further efficiency is gained by using a separable approximation to the Green's function through singular value decomposition and increasing the effective sampling rate by polyphase filtering. The tradeoff between accuracy and spatial sampling rate is explored to determine appropriate parameters for a specific transducer. Comparisons with standard tools such as Field II are presented, where nearly 2 orders of magnitude improvement in computation speed is observed for similar accuracy.     

A proposed application of an industrial DOS computer fordistribution substation monitoring and control

This paper presents the design and implementation of an intelligent controller intended for use in distribution substations to perform monitoring and control duties within the framework of distribution automation needs. The hardware of the developed controller is a DOS based industrial computer running on ECB-BUS. The application software handles all input/output tasks, data collection, manipulation and control design decisions with its flexible structure. This embedded controller measures bus voltage, transformer and feeder currents and calculates the real and reactive power, power factor, frequency, and total harmonic distortion of voltage and current. In addition to its local remote data acquisition and monitoring functions by means of console and SCADA outputs, the system, through its relay outputs, is capable of performing automation tasks such as integrated Volt/VAr control, overload and underfrequency detection and load shedding at the substation level. This reliable, high capacity and low cost system is completely programmable so that it can handle new requirements with new configurations easily     

Kinetics of the solid-state carbothermic reduction of wessel manganese ores

Reduction of manganese ores from the Wessel mine of South Africa has been investigated in the temperature range 1100 °C to 1350 °C with pure graphite as the reductant under argon atmosphere. The rate and degree of reduction were found to increase with increasing temperature and decreasing particle sizes of both the ore and the graphite. The reduction was found to occur in two stages: (1) The first stage includes the rapid reduction of higher oxides of manganese and iron to MnO and FeO. The rate control appears to be mixed, both inward diffusion of CO and outward diffusion of CO₂ across the porous product layer, and the reaction of carbon monoxide on the pore walls of the oxide phase play important roles. The values of effective CO-CO₂ diffusivities generated by the mathematical model are in the range from 2.15 x 10⁻⁵ to 6.17 X 10⁻⁵ cm².s⁻¹ for different ores at 1300 °C. Apparent activation energies range from 81. 3 to 94.6 kJ/kg/mol. (2) The second stage is slower during which MnO and FeO are reduced to mixed carbide of iron and manganese. The chemical reaction between the manganous oxide and carbon dissolved in the metal phase or metal carbide seems to be the rate-controlling process The rate constant of chemical reaction between MnO and carbide on the surface of the impervious core was found to lie in the range from 1.53 x 10⁻⁸ to 1.32 x 10⁻⁷ mol . s⁻¹ . cm⁻². Apparent activation energies calculated are in the range from 102.1 to 141.7 kJ/kg/mol. Formerly Doctoral Student, Department of Metallurgy and Materials Engineering, University of the Witwatersrand, Johannesburg,     

Adsorption of botulinum toxin to activated charcoal with a mouse bioassay

STUDY OBJECTIVE: We evaluated the effectiveness of activated charcoal (AC) in adsorbing Clostridium botulinum type A toxin using a mouse bioassay. DESIGN: Prospective, blinded, randomized, controlled animal study. SETTING: Animal care facility. PARTICIPANTS: One hundred forty Swiss/Webster ND-4 strain mice. INTERVENTION: Food contaminated with type A botulinum toxin was homogenized in a phosphate/gel buffer (pH 6.2). The concentrate was diluted by factors of 1:10, 1:50, and 1:100. AC was added to aliquots of the dilutions to a 20% final concentration. The samples were centrifuged, supernatant was removed, and separate groups of mice were injected intraperitoneally with .5 mL of each dilution (those treated with AC and controls untreated with AC). The animals were then observed over 5 days for signs of botulism. RESULTS: None of the 60 animals injected intraperitoneally with dilutions treated with AC was observed to have any signs of botulism. In contrast, deaths were observed in 10 of 20, 9 of 20 and 4 of 20 mice injected with untreated dilutions of 1:100, 1:50, and 1:10, respectively (P < .004). CONCLUSION: In this model, treatment of botulinum toxin with AC before administration resulted in greatly reduced morbidity and mortality.     

Synthesis, characterization and adsorption study of the uranyl ions by hydrogels based on polyethylene glycol and methacrylic acid copolymers

The water swelling polymeric hydrogels were obtained by γ-initiated radiation copolymerization of polyethylene glycol (PEG) with methacrylic acid (MAA) and three-ethylene glycol dimethacrylate (TEGDMA) as cross-linking agent. The main regularities of PEG-MAA network formation, deformation properties, structure and thermal characteristics depending on copolymer composition, molecular weight of PEG have been studied. The sorption of uranyl ions by PEG-MAA hydrogels in comparison with homopolymer PMAA was investigated. The effect of uranyl ions concentration on sorption efficiency of hydrogels was shown. The ability to regeneration in desorption process was demonstrated for PEG-MAA hydrogels in comparison with PMAA gel.     

Optoelectronic properties of thiazole‐based polythiophenes

In this work, two thiazole‐containing monomers N‐(thiazol‐2‐yl)?2‐(thiophen‐3‐yl)acetamide (ThDBTH) and N,N′‐([4,4′‐bithiazole]‐2,2′‐diyl)bis(2‐(thiophen‐3‐yl)acetamide) (Th₂DBTH) were synthesized through amidification reaction of 2‐(thiophen‐3‐yl)acetyl chloride with aminothiazole derivatives and characterized by FTIR and ¹H and ¹³C‐NMR. The monomers were subjected to electrochemical polymerization and optoelectronic properties of the resultant conducting polymers were investigated. Additionally, copolymerization of ThDBTH in the presence of thiophene was achieved. PThDBTH, PTh₂DBTH, and P(ThDBTH‐Th) exhibited optical band gaps of 2.15, 2.30, and 1.95 eV, respectively. Switching time and optical contrast of the polymers were evaluated via kinetic studies. The P(ThDBTH‐Th) revealed satisfactory switching time and appropriate optical contrast of 1.27 s and 24.97%, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42206.     

Influence of exopolysaccharide‐producing cultures on the volatile profile and sensory quality of low‐fat Tulum cheese during ripening

The objective of this investigation was to compare the composition and changes in the concentration of volatiles in low‐fat and full‐fat Tulum cheeses during ripening. Tulum cheese was manufactured from low‐ or full‐fat milk using exopolysaccharide (EPS)‐producing or non‐EPS‐producing starter cultures. A total of 82 volatile compounds were identified belonging to the following chemical groups: acids (seven), esters (21), ketones (14), aldehydes (six), alcohols (14) and miscellaneous compounds (20). The relative amounts of acids, alcohols and aldehydes increased in the cheeses made with EPS‐producing cultures during 90 days of ripening. Differences were found in the volatile profile of full‐fat Tulum cheese compared with the low‐fat variant, especially after 90 days of ripening. Exopolysaccharide‐producing cultures changed the volatile profile, and the EPS‐producing cultures including Streptococcus thermophilus + Lactobacillus delbrueckii subsp. bulgaricus + Lactobacillus helveticus (LF‐EPS2) produced cheese with higher levels of methyl ketones and aldehydes than the non‐EPS cultures. In the sensory analysis, full‐fat Tulum cheeses and the cheese produced with the EPS‐producing culture containing Lb. helveticus (LF‐EPS2) were preferred by the expert panel. It was concluded that the use of EPS‐producing starter cultures in the manufacture of low‐fat Tulum cheese had the potential to improve the flavour.     

Transient heat conduction analysis in a piecewise homogeneous domain by a coupled boundary and finite element method

A coupled finite element–boundary element analysis method for the solution of transient two‐dimensional heat conduction equations involving dissimilar materials and geometric discontinuities is developed. Along the interfaces between different material regions of the domain, temperature continuity and energy balance are enforced directly. Also, a special algorithm is implemented in the boundary element method (BEM) to treat the existence of corners of arbitrary angles along the boundary of the domain. Unknown interface fluxes are expressed in terms of unknown interface temperatures by using the boundary element method for each material region of the domain. Energy balance and temperature continuity are used for the solution of unknown interface temperatures leading to a complete set of boundary conditions in each region, thus allowing the solution of the remaining unknown boundary quantities. The concepts developed for the BEM formulation of a domain with dissimilar regions is employed in the finite element–boundary element coupling procedure. Along the common boundaries of FEM–BEM regions, fluxes from specific BEM regions are expressed in terms of common boundary (interface) temperatures, then integrated and lumped at the nodal points of the common FEM–BEM boundary so that they are treated as boundary conditions in the analysis of finite element method (FEM) regions along the common FEM–BEM boundary. Copyright © 2002 John Wiley & Sons, Ltd.