An integrated 8-12 GHz fractional-N frequency synthesizer in SiGe BiCMOS for satellite communications

We present an integrated fractional-N low-noise frequency synthesizer for satellite applications. By using two integrated VCOs and combining digital and analog tuning techniques, a PLL lock range from 8 to 12 GHz is achieved. Due to a small VCO fine tuning gain and optimized charge pump output biasing, the phase noise is low and almost constant over the tuning range. All 16 sub-bands show a tuning range above 900 MHz each, allowing temperature compensation without sub-band switching. This makes the synthesizer robust against variations of the device parameters with process, supply voltage, temperature and aging. The measured phase noise is ?87 dBc/Hz and ?106 dBc/Hz at 10 kHz and 1 MHz offset, respectively. In integer-N mode, phase noise values down to ?98 dBc/Hz at 10 kHz and ?111 dBc/Hz at 1 MHz offset, respectively, were measured.     

Direct Imaging of Space‐Charge Accumulation and Work Function Characteristics of Functional Organic Interfaces

The tailoring of organic systems is crucial to further extend the efficiency of charge transfer mechanisms and represents a cornerstone for molecular device technologies. However, this demands control of electrical properties and understanding of the physics behind organic interfaces. Here, a quantitative spatial overview of work function characteristics for phthalocyanine architectures on Au substrates is provided via kelvin probe microscopy. While macroscopic investigations are very informative, the current approach offers a nanoscale spatial rendering of electrical characteristics which is not possible to attain via conventional techniques. Interface dipole is observed due to the formation of charge accumulation layers in thin F₁₆CuPc, F₁₆CoPc, and MnPc films, displaying work functions of 5.7, 6.1, and 5.0 eV, respectively. The imaging and quantification of interface locations with significant surface potential and work function response (<0.33 eV for material thickness <1 nm) show also a dependency on the crystalline state of the organic systems. The work function mapping suggests space‐charge carrier regions of about 4 nm at the organic interface. This reveals rich spatial electric parameters and ambipolar characteristics that may drive electrical performance at device scales, opening a realm of possibilities toward the development of functional organic architectures and its applications.     

Solid-phase epitaxy of undoped amorphous silicon by in-situ postannealing

The solid phase epitaxy (SPE) of undoped amorphous Si (a-Si) deposited on SiO₂ patterned Si(001) wafers by reduced pressure chemical vapor deposition (RPCVD) using a H₂-Si₂H₆ gas system was investigated. The SPE was performed by applying in-situ postannealing directly after deposition process. By transmission electron microscopy (TEM) and scanning electron microscopy, we studied the lateral SPE (L-SPE) length on sidewall and mask for various postannealing times, temperatures and a-Si thicknesses. We observed an increase in L-SPE growth for longer postannealing times, temperatures and larger Si thicknesses on mask. TEM defect studies revealed that by SPE crystallized epi-Si exhibits a higher defect density on the mask than at the inside of the mask window. By introducing SiO₂-cap on the sample with 180 nm Si thickness following postannealing at 570 °C for 5 h, the crystallization of up to 450 nm epi-Si from a-Si is achieved. We demonstrated the possibility to use this technique for SiGe:C heterojunction bipolar transistor (HBT) base layer stack to crystallize Si-buffer layer to widen the monocrystalline region around the bipolar window and to improve base link resistivity of the HBT.     

Plant-derived polyphenols attenuate lipopolysaccharide-induced nitric oxide and tumour necrosis factor production in murine microglia and macrophages

Lipopolysaccharides released during bacterial infections induce the expression of pro-inflammatory cytokines and lead to complications such as neuronal damage in the CNS and septic shock in the periphery. While the initial infection is treated by antibiotics, anti-inflammatory agents would be advantageous add-on medications. In order to identify such compounds, we have compared 29 commercially available polyphenol-containing plant extracts and pure compounds for their ability to prevent LPS-induced up-regulation of NO production. Among the botanical extracts, bearberry and grape seed were the most active preparations, exhibiting IC(50) values of around 20 mug/mL. Among the pure compounds, IC(50) values for apigenin, diosmetin and silybin were 15, 19 and 12 muM, in N-11 murine microglia, and 7, 16 and 25 muM, in RAW 264.7 murine macrophages, respectively. In addition, these flavonoids were also able to down-regulate LPS-induced tumour necrosis factor production. Structure-activity relationships of the flavonoids demonstrated three distinct principles: (i) flavonoid-aglycons are more potent than the corresponding glycosides, (ii) flavonoids with a 4'-OH substitution in the B-ring are more potent than those with a 3'-OH-4'-methoxy substitution, (iii) flavonoids of the flavone type (with a C2=C3 double bond) are more potent than those of the flavanone type (with a at C2-C3 single bond).     

Long-term aging of copper added to soils

Aging refers to the processes by which the mobility and bioavailability/toxicity of metals added to soil decline with time. Although long-term aging is a key process that needs to be considered in the risk assessment of metals in field soils, the long-term aging of Cu added to soils has not been studied in detail. In this study, the effects of aging on Cu isotopic exchangeability, total Cu in soil pore water, pore water free Cu2+ activity, and "available" Cu measured by the technique of diffusive gradient in thin film (DGT-Cu) were investigated in 19 European soils at two total Cu concentrations shown to inhibit plant (tomato) growth by 10 and 90%. After addition of Cu, the soils were leached, incubated outdoors, and sampled regularly over a 2-year period. The results showed that when water soluble Cu was added to soils, concentrations of Cu determined by each of the techniques tended to decrease rapidly initially, followed by further decreases at slow rates. Soil pH was a vital factor affecting the aging rate of Cu added to soils. The relatively low solubility products and low isotopic exchangeabilities of Cu in calcareous soils immediately after addition of soluble Cu2+ suggested Cu2+ probably precipitated in these soils as Cu2(OH)2CO3 (malachite) and Cu(OH)2. Isotopic dilution was found to be a robust technique for measuring rates of long-term aging reactions. A semi-mechanistic model was developed to describe the rate and extent of Cu aging across soils as affected by soil pH and other physicochemical parameters. Although not measured directly, it is inferred from soil physicochemical controls on Cu aging that processes of precipitation/nucleation of Cu in soils and hydrolysis of Cu2+ followed by a diffusion process controlled the decrease in Cu availability with time. The model was validated by testing it against field soils with different contamination histories and was found to successfully predict the isotopic exchangeability of Cu added to soils based on two parameters: soil pH and time.     

Prevalence, distribution, and diversity of Listeria monocytogenes in retail environments, focusing on small establishments and establishments with a history of failed inspections

Despite growing concerns about cross-contamination of ready-to-eat foods with Listeria monocytogenes, our knowledge about the ecology and transmission of L. monocytogenes in retail establishments has remained limited. We conducted a cross-sectional study to characterize the prevalence, distribution, and subtype diversity of L. monocytogenes in 120 New York State retail deli establishments that were hypothesized to present an increased risk for environmental L. monocytogenes contamination (i.e., small establishments and establishments with a history of failed New York State Agriculture and Markets inspections). Analysis of these data along with previously reported data for 121 predominantly larger retail establishments in New York State identified establishment size, geographic location, and inspection history as significant predictors of L. monocytogenes presence and prevalence. The odds of an establishment being L. monocytogenes positive were approximately twice as high for large establishments, establishments located in New York City, or establishments with poor inspection history (as compared with establishments without these attributes), even though correlation between location and inspection history complicated interpretation of results. Within an establishment, L. monocytogenes was significantly more prevalent on nonfood contact surfaces than on food contact surfaces; prevalence was particularly high for floors and in floor drains, sinks, the dairy case, and milk crates. L. monocytogenes subtype diversity differed between sites, with lineage I isolates significantly associated with nonfood contact surfaces and lineage II isolates significantly associated with food contact surfaces. Isolates belonging to the same ribotype were often found dispersed across multiple sites within an operation.     

Composition and stability of phytochemicals in five varieties of black soybeans (Glycine max)

Phytochemical compositions of five varieties of black soybeans (Glycine max) and their stabilities at room temperature, 4 and −80 °C over 14 months were determined by HPLC systems with electrochemical (ECD) and UV detectors. Polyphenol profiling was carried out by a liquid chromatography–electrospray ionisation-mass spectrometry (LC–ESI-MS) with orbitrap as a mass analyser in both positive and negative ion modes, and polyphenols in aglycone forms were quantified by HPLC–ECD. Five different varieties of black soybeans (G. max) contained 249–405 μg/g dry wt of γ-tocopherol and 6.76–14.98 μg/g dry wt of lutein. Major polyphenols in black soybeans (G. max) were daidzein (193–288 μg/g dry wt) and genistein (145–223 μg/g dry wt), mainly present as glucosides and acetyl glucosides. No significant decrease was found in total phenols of black soybeans (G. max) stored at room temperature, 4 or −80 °C for 14 months. On the other hand, lutein and γ-tocopherol degraded significantly within a month of storage at room temperature (p < 0.01), whereas they remained stable up to 6 months at 4 °C and up to 14 months at −80 °C. The current study indicates that black soybeans (G. max) are rich source of γ-tocopherol and phenols (isoflavones, flavonols, flavan-3-ols, proanthocyanidins and anthocyanin) and that the levels vary depending upon varieties. In addition, storage at low temperature is recommended to reduce the loss of fat-soluble phytochemicals in black soybeans (G. max) over an extended period of time.     

Non-targeted screening for contaminants in paper and board food-contact materials using effect-directed analysis and accurate mass spectrometry

Due to large knowledge gaps in chemical composition and toxicological data for substances involved, paper and board food-contact materials (P&B FCM) have been emerging as a FCM type of particular concern for consumer safety. This study describes the development of a step-by-step strategy, including extraction, high-performance liquid chromatography (HPLC) fractionation, tentative identification of relevant substances and in vitro testing of selected tentatively identified substances. As a case study, we used two fractions from a recycled pizza box sample which exhibited aryl hydrocarbon receptor (AhR) activity. These fractions were analysed by gas chromatography (GC) and ultra-HPLC (UHPLC) coupled to quadrupole time-of-flight mass spectrometers (QTOF MS) in order tentatively to identify substances. The elemental composition was determined for peaks above a threshold, and compared with entries in a commercial mass spectral library for GC-MS (GC-EI-QTOF MS) analysis and an in-house built library of accurate masses for substances known to be used in P&B packaging for UHPLC-QTOF analysis. Of 75 tentatively identified substances, 15 were initially selected for further testing in vitro; however, only seven were commercially available and subsequently tested in vitro and quantified. Of these seven, the identities of three pigments found in printing inks were confirmed by UHPLC tandem mass spectrometry (QqQ MS/MS). Two pigments had entries in the database, meaning that a material relevant accurate mass database can provide a fast tentative identification. Pure standards of the seven tentatively identified substances were tested in vitro but could not explain a significant proportion of the AhR-response in the extract. Targeted analyses of dioxins and PCBs, both well-known AhR agonists, was performed. However, the dioxins could explain approximately 3% of the activity observed in the pizza box extract indicating that some very AhR active substance(s) still remain to be identified in recycled low quality P&B.     

The influence of different centralised pre-packaging systems on the shelf-life of fresh pork

The influence of different centralised pre-packaging systems (PVC, modified atmosphere packaging (MAP), 25% CO(2) and 75% O(2), vacuum skin packaging (VSP) and the mother bag concept, 100% CO(2)) on the shelf-life (0, 7, 14 and 21 days at 0°C) of fresh pork was determined using microbiological, colour, odour and acceptability characteristics. All the packaging treatments were equally efficient for the first 4 days of retail display. In the extended shelf-life study (7, 14 and 21 days) the mother bag centralised packaging system gave the most promising shelf-life results (21 days) and was also judged superior in terms of odour. Modified atmosphere packaging (14 days) and VSP (7 days) may be considered as other possible options.