Iron-catalyzed oxidation of arsenic(III) by oxygen and by hydrogen peroxide: pH-dependent formation of oxidants in the Fenton reaction

The oxidation kinetics of As(III) with natural and technical oxidants is still notwell understood, despite its importance in understanding the behavior of arsenic in the environment and in arsenic removal procedures. We have studied the oxidation of 6.6 microM As(II) by dissolved oxygen and hydrogen peroxide in the presence of Fe(II,III) at pH 3.5-7.5, on a time scale of hours. As(III) was not measurably oxidized by O2, 20-100 microM H2O2, dissolved Fe(III), or iron(III) (hydr)-oxides as single oxidants, respectively. In contrast, As(III) was partially or completely oxidized in parallel to the oxidation of 20-90 microM Fe(II) by oxygen and by 20 microM H2O2 in aerated solutions. Addition of 2-propanol as an *OH-radical scavenger quenched the As(III) oxidation at low pH but had little effect at neutral pH. High bicarbonate concentrations (100 mM) lead to increased oxidation of As-(III). On the basis of these results, a reaction scheme is proposed in which H2O2 and Fe(II) form *OH radicals at low pH but a different oxidant, possibly an Fe(IV) species, at higher pH. With bicarbonate present, carbonate radicals might also be produced. The oxidant formed at neutral pH oxidizes As(III) and Fe(II) but does not react competitively with 2-propanol. Kinetic modeling of all data simultaneously explains the results quantitatively and provides estimates for reaction rate constants. The observation that As(III) is oxidized in parallel to the oxidation of Fe(II) by O2 and by H2O2 and that the As(III) oxidation is not inhibited by *OH-radical scavengers at neutral pH is significant for the understanding of arsenic redox reactions in the environment and in arsenic removal processes as well as for the understanding of Fenton reactions in general.     

The grain-boundary resistance of CeO2 ceramics: A combined microscopy-spectroscopy-simulation study of a dilute solution

Weakly acceptor-doped ceria ceramics were characterized structurally and compositionally with advanced transmission electron microscopy (TEM) techniques and electrically with electrochemical impedance spectroscopy (EIS). The grain boundaries studied with TEM were found to be free of second phases. The impedance spectra, acquired in the range 703 ≤ T/K ≤ 893 in air, showed several arcs that were analyzed in terms of bulk, grain-boundary, and electrode responses. We ascribed the grain-boundary resistance to the presence of space-charge layers. Continuum-level simulations were used to calculate charge-carrier distributions (of acceptor cations, oxygen vacancies, and electrons) in these space-charge layers. The acceptor cations were assumed to be mobile at high (sintering) temperatures but immobile at the temperatures of the EIS measurements. Space-charge formation was assumed to be driven by the segregation of oxygen vacancies to the grain-boundary core. Comparisons of data from the simulations and from the EIS measurements yielded space-charge potentials and the segregation energy of vacancies to the grain-boundary core. The space-charge potentials from the simulations are compared with values obtained by applying the standard, analytical (Mott–Schottky and Gouy–Chapman) expressions. The importance of modelling space-charge layers from the thermodynamic level is demonstrated.     

Structural and Functional Characterization of 4-Hydroxyphenylacetate 3-Hydroxylase from Escherichia coli

The hydroxylation of phenols into polyphenols, which are valuable chemicals and pharmaceutical products, is a challenging reaction. The search for green synthetic processes has led to considering microorganisms and pure hydroxylases as catalysts for phenol hydroxylation. Herein, we report the structural and functional characterization of the flavin adenine dinucleotide (FAD)-dependent 4-hydroxyphenylacetate 3-monooxygenase from Escherichia coli, named HpaB. It is shown that this enzyme enjoys a relatively broad substrate specificity, which allows the conversion of a number of non-natural phenolic compounds, such as tyrosol, hydroxymandelic acid, coumaric acid, hydroxybenzoic acid and its methyl ester, and phenol, into the corresponding catechols. The reaction can be performed by using a simple chemical assay based on formate as the electron donor and the organometallic complex [Rh(bpy)Cp*(H₂O)]²⁺ (Cp*: 1,2,3,4,5-pentamethylcyclopentadiene, bpy: 2,2′-bipyridyl) as the catalyst for FAD reduction. The availability of a crystal structure of HpaB in complex with FAD at 1.8 Å resolution opens up the possibility of the rational tuning of the substrate specificity and activity of this interesting class of phenol hydroxylases.     

Identification of ritual blood in African artifacts using TOF-SIMS and synchrotron radiation microspectroscopies

A new protocol is implemented to demonstrate the presence of blood in the patina of African art objects from Mali. Divided into three steps, the protocol first consists in demonstrating the presence of proteins and localizing them in the sample's cross sections using time-of-flight secondary ion mass spectrometry (TOF-SIMS) and synchrotron-based infrared microspectrometry (microFT-IR). In a second time, TOF-SIMS is used to investigate heme, which is a blood marker. If heme is missing, which could mean that it is too degraded to be detected, X-ray microfluorescence (microXRF) and X-ray absorption near-edge microspectroscopy (microXANES) are used to prove the presence of iron in the protein area and to get a fingerprint of its chemical environment. This permits us thus to demonstrate that iron is indeed linked with proteins and not with mineral phases of the sample. Coupled with the ritual context of the objects, this constitutes a proof of the use of blood. Thanks to this protocol, which has the major advantage of avoiding false positive results, the presence of blood has been demonstrated in seven out of the eight studied samples.     

Sol–Gel Processing and Microwave Characteristics of Ba(Mg⅓Ta⅔)O3 Dielectrics

The sol–gel method has been developed for the preparation of pure Ba(Mg_1/3Ta_2/3)O₃ ceramics. This involves the reaction of the heterometallic alkoxide Ta₂Mg(OEt)₁₂ with hydrated barium hydroxide Ba(OH)₂·8H₂O. Complete crystallization of the sol–gel-derived powder is achieved at 600°C, leading to a cubic perovskite type phase. After sintering at 1400°C (2–5 h), a trigonal cell arises from Mg–Ta ordering (the degree of order is greater than 0.9), and about 98.5% of the theoretical density is obtained. Preliminary microwave dielectric measurements show that the dielectric constant and the unloaded Q _u of the ceramics are 24.2 and 6750, respectively, at 7.7 GHz.     

In vitro comparison of hepatic metabolism of 9cis-11 trans and 10trans-12cis isomers of CLA in the rat

Hepatic metabolism of the two main isomers of CLA (9cis-11 trans, 10trans-12cisC_18∶2) was compared to that of oleic acid (representative of the main plasma FA) in 16 rats by using the in vitro method of incubated liver slices. Liver tissue samples were incubated at 37°C for 17h under an atmosphere of 95% O₂/5%CO₂ in a medium supplemented with 0.75 mM of FA mixture (representative of circulating nonesterified FA) and with 55 μM [1-¹⁴C]9cis-11 trans C_18∶2, [1-¹⁴C]10trans-12cis C_18∶2, or [1-¹⁴C]oleate. The uptake of CLA by hepatocytes was similar for both isomers (9%) and was three times higher (P<0.01) than for oleate (2.6%). The rate of CLA isomer oxidation was two times higher (49 and 40% of incorporated amounts of 9cis-11 trans and 10trans-12 cis, respectively) than that of oleate (P<0.01). Total oxidation of oleate and CLA isomers into [¹⁴CO₂] was low (2 to 7% of total oxidized FA) compared to the partial oxidation (93 to 98%) leading to the production of [¹⁴C] acid-soluble products. CLA isoemrs escaping from catabolism were both highly desaturated (26.7 and 26.8%) into conjugated 18∶3. Oleate and CLA isomers were mainly esterified into neutral lipids (30%). They were slowly secreted as parts of VLDL particles (<0.4% of FA incorporated into cells), the extent of secretion of oleate and of 10trans-12 cis being 2.2-fold higher than that of 9cis-11 trans (P<0.02). In conclusion, this study clearly showed that both CLA isomers were highly catabolized by hepatocytes, reducing their availability for peripheral tissues. Moreover, more than 25% of CLA escaping from catabolism was converted into conjugated 18∶3, the biological properties of which remain to be elucidated.     

Evaluation of major factors influencing the TBC topcoat formation in axial suspension plasma spraying (SPS)

Suspension plasma spraying (SPS) is ideally suited to produce porous or dense columnar, strain-tolerant thermal barrier coatings (TBCs) and also offers the possibility of producing other microstructures such as feathery and dense vertically cracked coatings. The specific properties of the TBC are significantly influenced by the formed microstructure, that is, affected by feedstock material and process parameters. In this work, the effects of various process parameters in the SPS process are investigated. It was found that the suspension feed rate has a significant effect on the microstructure, especially on the column density of the coating, whereas the suspension solids content mainly affects the coating porosity. Additionally, the surface roughness and topography of the bond coat are crucial for the formation of columnar coatings and were therefore investigated. Despite comparable roughness values for as-sprayed bond coats for high velocity oxy fuel and vacuum plasma spray produced coatings, the surface structures differ significantly from each other and affect the microstructure of the deposited topcoat. Characterization of mechanical properties by means of micro-indenter can be suitable for columnar coatings to determine Young's modulus within a column. However, due to the heterogeneity of the coating, the method is not suitable to describe the mechanical properties of the topcoat.     

Synthesis and Pharmacological Evaluation of a series of the Agomelatine Analogues as Melatonin MT1/MT2 Agonist and 5‐HT2C Antagonist

Agomelatine is a naphthalenic analogue of melatonin that is in clinical use for the treatment of major depressive disorders. Interestingly, while agomelatine exhibits potent affinity for melatonin receptors, it binds with only moderate affinity to the serotonin 5‐HT_2C receptor. Optimization of agomelatine toward this target could further potentiate its clinical efficacy. To explore this hypothesis and to access derivatives in which a key point of agomelatine metabolism is blocked, a series of naphthalenic derivatives was designed and synthesized as novel analogues of agomelatine. Most of the prepared compounds exhibited good binding affinity at the melatonin MT₁ and MT₂ receptor subtypes. Two compounds, an acetamide and an acrylamide derivative, exhibited good binding affinities at both the human melatonin (MT) receptors and the serotonin 5‐HT_2C receptor subtype, with pK_i values of 7.96 and 7.95 against MT₁, 7.86 and 8.68 against MT2, and 6.64 and 6.44 against 5‐HT_2C, respectively.