Effects of crosslink density on mechanical properties of high glass transition temperature polycyanurate networks

Polycyanurate networks of different architecture were synthesized using different curing cycles. Networks with a variable extent of reaction were obtained; the small variation of the cyanate conversion (0.8 to 1) corresponds to a large variation of glass transition temperature (150–290°C) and crosslink density. The mechanical behavior at small and large deformations and the fracture toughness were examined at room temperature and related to the network structural parameters. To explain the puzzling variation of the yield stress and yield strain with the cyanate conversion, recovery experiments were conducted to discriminate anelastic deformation from plastic deformation. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2471–2479, 1997     

Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer

Silane sol–gel based films are very promising alternatives to the traditional chromate pre-treatments. However, the protection offered by the silane films strongly decreases when the coating is damaged. Some previous studies showed that the barrier properties of the silane layer can be improved by incorporation of clay nanoparticles. Moreover, inhibitive metallic cations can be incorporated in the nanoclays by ion exchange, providing a way to prepare cheap corrosion inhibitors nanoreservoirs offering self-healing properties. Rare earth (RE) metal salts have been shown to be effective corrosion inhibitors on a wide range of metals, including hot dip galvanized (HDG) steel. For this study, montmorillonite clay is modified to obtain a Ce(III) montmorillonite clay (Ce-MMT). The amount of incorporated Ce(III) is characterized by means of XRF measurements. X-ray diffraction showed that the Ce(III) is located in the interlayer space.     

Direct comparison of Eulerian–Eulerian and Eulerian–Lagrangian simulations for particle-laden vertical channel flow

Particle-laden flows in a vertical channel were simulated using an Eulerian–Eulerian, Anisotropic Gaussian (EE-AG) model. Two sets of cases varying the overall mass loading were done using particle sizes corresponding to either a large or small Stokes number. Primary and turbulent statistics were extracted from these results and compared with counterparts collected from Eulerian–Lagrangian (EL) simulations. The statistics collected from the small Stokes number particle cases correspond well between the two models, with the EE-AG model replicating the transition observed using the EL model from shear-induced turbulence to relaminarization to cluster-induced turbulence as the mass loading increased. The EE-AG model was able to capture the behavior of the EL simulations only at the largest particle concentrations using the large Stokes particles. This is due to the limitations involved with employing a particle-phase Eulerian model (as opposed to a Lagrangian representation) for a spatially intermittent system that has a low particle number concentration.     

Modified Galacto- or Fuco-Clusters Exploiting the Siderophore Pathway to Inhibit the LecA- or LecB-Associated Virulence of Pseudomonas aeruginosa

Galacto- and fuco-clusters conjugated with one to three catechol or hydroxamate motifs were synthesised to target LecA and LecB lectins of Pseudomonas aeruginosa (PA) localised in the outer membrane and inside the bacterium. The resulting glycocluster–pseudosiderophore conjugates were evaluated as Trojan horses to cross the outer membrane of PA by iron transport. The data suggest that glycoclusters with catechol moieties are able to hijack the iron transport, whereas those with hydroxamates showed strong nonspecific interactions. Mono- and tricatechol galactoclusters ( G1C and G3C ) were evaluated as inhibitors of infection by PA in comparison with the free galactocluster ( G0 ). All of them exhibited an inhibitory effect between 46 to 75 % at 100 μM, with a higher potency than G0 . This result shows that LecA localised in the outer membrane of PA is involved in the infection mechanism.     

Experimental study of bubble formation in a glass-forming liquid doped with cerium oxide

This work aims to study the mechanisms of oxygen bubble formation coming from redox reaction of a polyvalent element incorporated in a glass melt. Borosilicate glass composition is selected for its use as a glass matrix for nuclear waste conditioning. Cerium is selected as a polyvalent element as it may be found in nuclear waste. The chosen material is characterized in terms of physical properties which influence bubble formation and growth. A postmortem optical microscope approach is used to observe bubbles in the investigated material after thermal treatment for varying temperatures (900°C-1100°C) and durations. To support the understanding of oxygen bubble formation, cerium speciation by X-ray absorption near-edge structure (XANES) and bubble gas composition are experimentally evaluated. In this article, we indicate how bubbles are formed in the investigated glass melt system. It is also demonstrated that the mechanisms that govern bubble evolution are fundamentally the same and that the plot's optimum points are strongly influenced by the temperature. These last statements are confirmed by considering some bubble features, such as bubble mean density and bubble mean diameter evolutions, and normalizing the experimental time using a characteristic residence time (t_η) obtaining thereafter a dimensionless time, which is a function of the glass melt properties obtained by the physical characterizations. The impact of temperature and time on bubble formation is described.     

Short SiC fiber/Ti3SiC2 MAX phase composites: Fabrication and creep evaluation

The compressive creep of silicon carbide fiber reinforced Ti₃SiC₂ MAX phase with both fine and coarse microstructure was investigated in the temperature range of 1000-1300°C. Comparison of only steady-state creep was done to understand the response of fabricated composite materials toward creep deformation. It was demonstrated that the fibers are more effective in reducing the creep rates for the coarse microstructure by an increase in activation energy compared to the variant with a finer microstructure, being partly a result of the enhanced creep rates for the microstructure with larger grain size. Grain boundary sliding along with fiber fracture appears to be the main creep mechanism for most of the tested temperature range. However, there are indications for a changed creep mechanism for the fine microstructure for the lowest testing temperature. Local pores are formed to accommodate differences in strain related to creeping matrix and predominantly elastically deformed fibers during creep. Microstructural analysis was done on the material before and after creep to understand the deformation mechanics.     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

Involvement of GPx-3 in the Reciprocal Control of Redox Metabolism in the Leukemic Niche

The bone marrow (BM) microenvironment plays a crucial role in the development and progression of leukemia (AML). Intracellular reactive oxygen species (ROS) are involved in the regulation of the biology of leukemia-initiating cells, where the antioxidant enzyme GPx-3 could be involved as a determinant of cellular self-renewal. Little is known however about the role of the microenvironment in the control of the oxidative metabolism of AML cells. In the present study, a coculture model of BM mesenchymal stromal cells (MSCs) and AML cells (KG1a cell-line and primary BM blasts) was used to explore this metabolic pathway. MSC-contact, rather than culture with MSC-conditioned medium, decreases ROS levels and inhibits the Nrf-2 pathway through overexpression of GPx3 in AML cells. The decrease of ROS levels also inactivates p38MAPK and reduces the proliferation of AML cells. Conversely, contact with AML cells modifies MSCs in that they display an increased oxidative stress and Nrf-2 activation, together with a concomitant lowered expression of GPx-3. Altogether, these experiments suggest that a reciprocal control of oxidative metabolism is initiated by direct cell–cell contact between MSCs and AML cells. GPx-3 expression appears to play a crucial role in this cross-talk and could be involved in the regulation of leukemogenesis.     

Evaluation of major factors influencing the TBC topcoat formation in axial suspension plasma spraying (SPS)

Suspension plasma spraying (SPS) is ideally suited to produce porous or dense columnar, strain-tolerant thermal barrier coatings (TBCs) and also offers the possibility of producing other microstructures such as feathery and dense vertically cracked coatings. The specific properties of the TBC are significantly influenced by the formed microstructure, that is, affected by feedstock material and process parameters. In this work, the effects of various process parameters in the SPS process are investigated. It was found that the suspension feed rate has a significant effect on the microstructure, especially on the column density of the coating, whereas the suspension solids content mainly affects the coating porosity. Additionally, the surface roughness and topography of the bond coat are crucial for the formation of columnar coatings and were therefore investigated. Despite comparable roughness values for as-sprayed bond coats for high velocity oxy fuel and vacuum plasma spray produced coatings, the surface structures differ significantly from each other and affect the microstructure of the deposited topcoat. Characterization of mechanical properties by means of micro-indenter can be suitable for columnar coatings to determine Young's modulus within a column. However, due to the heterogeneity of the coating, the method is not suitable to describe the mechanical properties of the topcoat.     

Sol–Gel Processing and Microwave Characteristics of Ba(Mg⅓Ta⅔)O3 Dielectrics

The sol–gel method has been developed for the preparation of pure Ba(Mg_1/3Ta_2/3)O₃ ceramics. This involves the reaction of the heterometallic alkoxide Ta₂Mg(OEt)₁₂ with hydrated barium hydroxide Ba(OH)₂·8H₂O. Complete crystallization of the sol–gel-derived powder is achieved at 600°C, leading to a cubic perovskite type phase. After sintering at 1400°C (2–5 h), a trigonal cell arises from Mg–Ta ordering (the degree of order is greater than 0.9), and about 98.5% of the theoretical density is obtained. Preliminary microwave dielectric measurements show that the dielectric constant and the unloaded Q _u of the ceramics are 24.2 and 6750, respectively, at 7.7 GHz.