On arginine-based polyurethane-blends specific to vascular prostheses

Polymer blends based on Tecoflex™ and an experimental aliphatic polyurethane (HMDI-PCL-arginine stands for 4,4 (metylene-biscyclohexyl) isocyanate - poly (ε caprolactone) diol, SPUUR stands for segmented poly(urea)urethanes using amino acid of L-Arginine as chain extender) were obtained by solvent casting, and further studied by fourier transform infrared (FTIR) and Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, and X-ray diffraction (XRD). Their biological performances were assessed in terms of hemocompatibility and Human umbilical vein endothelial cell (HUVEC) cytotoxicity. Tensile properties of dumbbell specimens were compared to longitudinal and circumferential tensile properties of tubular vascular graft. FTIR showed that as the SPUUR content increased in the blend, absorptions at 2860 cm⁻¹ increased, carbonyl absorptions at 1724 cm⁻¹ broaden and the small peak at 2796 cm⁻¹, typical of Tecoflex™ disappeared. Raman spectroscopy showed that the low intensity carbonyl absorption at 1724 cm⁻¹ also increased with SPUUR content. DSC allowed detection of PCL soft segment melting (T_m = 50°C) in agreement with X-ray reflections at 21.3° and 23.6°, assigned to SPUUR. However, no improvements in thermal stability were detected by TGA by blending. The addition of SPUUR to Tecoflex™ improved hemocompatibility and HUVEC cytotoxicity. The vascular grafts performance showed that 40% SPUUR blends exhibited the highest force in the longitudinal test whereas 50% SPUUR blends showed the highest circumferential force. Pressure burst strength was higher than 1000 mmHg for all blends. Overall, these blends can be used for high caliber vascular grafts.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

Densification Kinetics of CeO<Subscript>2</Subscript> Reinforced 8 Mol.% Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Stabilized ZrO<Subscript>2</Subscript> Ceramics

The grain growth kinetics of 8YSZ ceramics processed using spark plasma sintering (SPS) has been investigated in the temperature ranging from 1100°C to 1500°C. The activation energy during SPS densification was obtained as 332 kJ/mol with grain boundary diffusion as a dominant mechanism. Further, the effect of CeO₂ on the densification kinetics of 8YSZ ceramic processed via SPS and conventional sintering (CS) has been delineated. The lower grain boundary mobility of CS-processed composites (an order of magnitude lower than SPS) is attributed to the solute drag and lattice distortion mechanism. However, no significant change in the grain boundary mobility was observed with CeO₂ addition (~?14.7–43.9?×?10^?18 m³/N/s for CS and 107.2–116.7?×?10^?18 m³/N/s for SPS) revealing that the defect concentration is nearly constant in 8YSZ. The study highlights the effect of sintering techniques (SPS and CS) and reinforcement (CeO₂) on engineering the desired microstructure of 8YSZ ceramic.     

Reduction of seawater scale forming potential using the fluidized bed crystallization technology

A fluidized bed crystallization technology was found to be a feasible method for the reduction of scaling tendency of seawater. Seeded crystallization experiments in a pilot plant fluidized bed crystallizer were conducted. The obtained results for seawater, with initial salinity of 55.75 g/kg and initial pH of 8.23 at a constant temperature of 50 °C, have proven that the Ryznar Stability Index of seawater has been changed dramatically from its initial value of 4.77 (in the range of high scaling potential) to the value of 5.10 (in the range of middle to small scaling potential) over a time period of 180 min.     

Role of alloyed silicon and some inorganic inhibitors in the inhibition of meta-stable and stable pitting of Al in perchlorate solutions

The study of both meta-stable and stable pitting events on the surface of pure Al and three Al–Si alloys, namely (Al + 6%Si), (Al + 12%Si) and (Al + 18%Si) alloys, was carried out in deaerated neutral NaClO₄ solutions of various concentrations (10⁻⁴–10⁻² M). Measurements were carried out under the effect of various experimental conditions using potentiodynamic anodic polarization and potentiostatic techniques. The results presented below showed that meta-stable pits (appeared as oscillations in current) form at potentials close to the pitting potential (E _pit) and during the induction time for stable pit formation. Various factors affecting the rate of meta-stable and stable pits were studied. The presence of Si as an alloying element in Al reduces the rate of formation of meta-stable pits, corresponding to a reduction in the probability of developing stable pits, and an increase in the pitting potential results. The inhibitive effects of chromate, silicate, molybdate and tungstate on pitting corrosion in Al were also studied. Results obtained showed that these known inhibitors retard both meta-stable and stable pitting events. This makes attainment of stable pit growth more difficult in presence of these inhibitors.

Manifestation of external size reduction effects on the yield point of nanocrystalline rhodium using nanopillars approach

In this study, pure rhodium was fabricated and mechanically investigated at the nanoscale for the first time. The nanopillars approach was employed to study the effects of size on the yield point. Nanopillars with different diameters were fabricated using electroplating followed by uniaxial compression tests. Scanning electron microscopy (SEM) was used as a quality control technique by imaging the pillars before and after compression to ensure the absence of cracks, buckling, barrelling or any other problems. Transmission electron microscopy and SEM were used as microstructural characterization techniques. Due to substrate-induced effects, only the plastic region of the stress–strain curves were investigated, and it was revealed that the yield point increases with size reduction up to certain limit, then decreases with further reduction of the nanopillar size (diameter). The later weakening effect is consistent with the literature, which demonstrates the reversed size effect (the failure of the plasticity theory) in nanocrystalline metals, i.e. smaller is weaker. In this study, however, the effect of size reduction is not only weakening, but is strengthening-then-weakening, which the authors believe is the true behavior of nanocrystalline materials.     

Mechanisms of Nausea and Vomiting: Current Knowledge and Recent Advances in Intracellular Emetic Signaling Systems

Nausea and vomiting are common gastrointestinal complaints that can be triggered by diverse emetic stimuli through central and/or peripheral nervous systems. Both nausea and vomiting are considered as defense mechanisms when threatening toxins/drugs/bacteria/viruses/fungi enter the body either via the enteral (e.g., the gastrointestinal tract) or parenteral routes, including the blood, skin, and respiratory systems. While vomiting is the act of forceful removal of gastrointestinal contents, nausea is believed to be a subjective sensation that is more difficult to study in nonhuman species. In this review, the authors discuss the anatomical structures, neurotransmitters/mediators, and corresponding receptors, as well as intracellular emetic signaling pathways involved in the processes of nausea and vomiting in diverse animal models as well as humans. While blockade of emetic receptors in the prevention of vomiting is fairly well understood, the potential of new classes of antiemetics altering postreceptor signal transduction mechanisms is currently evolving, which is also reviewed. Finally, future directions within the field will be discussed in terms of important questions that remain to be resolved and advances in technology that may help provide potential answers.     

Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.