Fatigue damage in composite cylinders

In this study, optimal angle‐ply orientation of symmetric composite cylinders under fatigue loading is investigated. The fiber‐reinforced plastic cylinders were manufactured from E‐glass/epoxy. The layers were manufactured symmetrically in [±75°]₂, [±60°]₂, [±55°]₂, and [±45°]₂ orientations. Burst pressure of filament‐wound composite cylinders under alternating pure internal pressure was measured experimentally. Internal fatigue pressure testing method was applied to the composite cylinders in close‐ended condition. For this study, a PLC controlled hydraulic pressure testing machine has been employed. The static burst pressure values of specimens were measured; subsequently, fatigue test pressure was applied in 70, 60, and 50% stress levels of burst pressure for each orientation. Damage propagations of the composite cylinders on these stress levels were observed as whitening, leakage, and final failure for [±60°]₂, [±55°]₂, and orientations. When the damage propagation of [±75°]₂ angle‐ply cylinder was observed, whitening and leakage did not occur and final failure occurred suddenly. Stress‐cycle curves obtained from the tests are given in graphics. Experimental results reveal that variation in stress levels and the winding angles have considerable effects on final failure cycles, which is also presented graphically. The optimum winding angle for the composite pressure cylinders or vessels under internal fatigue pressure load was obtained as [±45°]₂ orientation. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Pullulan‐based films and coatings for food packaging: Present applications,emerging opportunities,and future challenges

Societal and industrial demands for lower environmental impact, cost effectiveness, and high‐performance goods and services are increasingly impacting the choice of technologies which are developed and deployed in consumer products. Like many other sectors, food packaging is moving to new technologies; the use of biopolymers is one of the most promising strategies toward an optimized use of traditional packaging materials (e.g., oil‐based plastics) without impairing the goal of extending shelf life. Among other food packaging materials, pullulan is attracting much attention due to its unique features. The goal of this review is to provide an overview of current and emerging applications of pullulan within the food packaging sector. In particular, the functional properties of interest for the food packaging industry will be discussed in light of the physicochemical attributes of this exopolysaccharide. Future challenges that may dictate the successful penetration of pullulan in the food packaging market are also outlined. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40539.     

HYDRODYNAMIC STUDIES IN A HALF SLOT-RECTANGULAR SPOUTED BED COLUMN

Experiments were carried out in a half slot-rectangular spouted bed to investigate the effects of slot width and lower section basal angle on column hydrodynamics. Flow regimes, minimum spouting velocity, spouting and maximum pressure drops, and maximum spoutable bed height were determined for 4 mm diameter polyethylene particles. The results are compared with those for conventional cylindrical and rectangular spouted beds. Correlations for each hydrodynamic parameter are developed and compared with equations available in the literature.     

Synthesis of hydroxyapatite crystals using carboxymethyl inulin for use as a delivery of ibuprofen

In the present study biodegradable, environmentally friendly polysaccharide-based polycarboxylate, carboxymethyl inulin (CMI), was used to produce hydroxyapatite (HAP) particles by wet chemical synthesis under controlled temperature, pH, and atmospheric conditions. The morphology and microstructure of the HAP nanoparticles were investigated by XRD, SEM, DTA–TGA and FTIR. CMI affects morphology, surface area, dimension and particle size distribution of the crystals. The reduction in size is greater in the direction of the c-axis. The increase in the polymer concentration to 7.5 g/L resulted in the mixture of nanoparticles with particle sizes of less than 100 nm. The SEM micrograph shows the formation of well-crystallized, agglomerated small particles of HAP. X-ray analysis has shown that the resulting particles have high thermal stability.The obtained crystals were used to produce tablets by direct compression of HAP. The influence of sample's CMI concentration on drug release profiles was investigated by using ibuprofen (C₁₃H₁₈O₂) as a model drug. The model was used to determine the effective diffusion coefficient of the drug from the tablets. A good agreement between experimental data and model predictions was obtained as calculated in the present work. The values of the diffusion coefficients range from 1.62 × 10^? 7 to 4.72 × 10^? 7 m² h^? 1.     

Investigation of electrochromic properties of poly(3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene)

Electropolymerization of 3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene BMPhDTT, having strong electron-donating methoxy groups, was performed, utilizing potentiodynamic method. The homopolymer was characterized by cyclic voltammetry (CV), Fourier transform infrared (FTIR) and UV–vis spectroscopy. Spectroelectrochemical and electrochromic properties of the homopolymer film were investigated and a PBMPhDTT/PEDOT device was constructed to understand its characteristics in detail. It was revealed that the potential range of 0.0–2.0 V is suitable for operating the device between yellow and blue colors. It indicated a good open circuit memory and stability.     

Amplify-and-Forward Cooperative OFDM with Multiple-Relays: Performance Analysis and Relay Selection Methods

In this paper, we investigate a cooperative system with multiple relays and amplify-and-forward relaying over frequency-selective channels. To extract the available multipath diversity, we employ orthogonal frequency division multiplexing (OFDM) with precoding. Through the derivation of pairwise error probability (PEP), we demonstrate that PEP is not a simple exponential function of the signal-to-noise ratio (SNR), but it includes a term that involves some power of logarithm of the SNR. If that term is ignored, the diversity order is given by the summation of the channel length in the direct link and the minimum of channel lengths in each relaying link confirmed by simulation results. Based on the PEP expression, we also propose two relay selection strategies; one is on a per-subcarrier basis and the other is on an all-subcarrier basis. Our simulation results indicate that both strategies result in performance improvements although the per-subcarrier method performs better.