The preparation of zinc silicate/ZnO particles and their use as an efficient UV absorber

The formation of zinc silicate/ZnO particles synthesized by a two-step method and their incorporation into PMMA is presented. In the first step a segmented-flow tubular reactor was used for the continuous room-temperature preparation of a zinc silicate/Zn(OH)₂ gel that was thermally treated after rinsing and drying in the second step. The same preparation procedure was also employed for the synthesis of pure ZnO and pure zinc silicate particles. It was found that the presence of the zinc silicate phase significantly influenced the final particle size, decreased the degree of crystallization and reduced the particles’ UV absorption capabilities. The reduced photocatalytic activity of the zinc silicate/ZnO particles indicated that the majority of ZnO crystallites were formed inside the zinc silicate matrix. The nanocomposite prepared from zinc silicate/ZnO particles (0.04 wt.%) and PMMA showed high UV shielding and at the same time sufficient transmittance in the visible-light region.     

Electrochromism of sol–gel derived niobium oxide films

Niobium oxide films are promising cathodic electrochromics that in many aspects can compete with the more frequently studied WO₃ films. The films reported herein were prepared using the sol–gel route from a NbCl₅ precursor. The electrochromic properties were pronounced for crystalline films heat-treated at 500°C and exhibited transmittance changes between coloured and bleached states of 60% in the ultraviolet (UV) and 80% in the visible (VIS) and near-infrared (NIR) regions. Improved bleaching and more reversible electrochromism of thick niobium oxide films (thickness (d)>250 nm) were obtained by lithiation.Electrochromic (EC) devices were also prepared by assembling niobium oxide and lithiated niobium oxide films of different thicknesses with a hybrid inorganic/organic Li⁺ ionic conductor (organically modified electrolyte-ormolyte) and a molybdenum and antimony doped tin oxide (SnO₂ : Sb(7%) : Mo(10%) counter electrode films. The EC devices exhibited adequate colouring/bleaching kinetics (<2 min) and colouring/bleaching changes up to 40–50%.     

The efferent therapy of Raynaud's phenomenon

The method of discrete plasmacytapheresis was applied for the treatment of 8 patients with primary and 18 with secondary Raynaud's phenomenon. The incorporation of this method in the therapeutic complex have promoted the achievement of clinical improvement in the whole of the patients with primary and in 13 with secondary Raynaud's phenomenon. Remission lasted from 1.5 months till 4.5 years. Positive effect is caused by the improvement of blood rheological properties on the hemodilution background, the excretion of pathological substances from blood flow.     

Optimization of a Quasi‐Solid‐State Dye‐Sensitized Photoelectrochemical Solar Cell Employing a Ureasil/Sulfolane Gel Electrolyte

A quasi‐solid‐state, dye‐sensitized photoelectrochemical solar cell employing a gel electrolyte obtained by sol–gel chemistry is described. The gel electrolyte is based on a ureasil precursor (i.e., a poly(propylene oxide) oligomer end‐capped by triethoxysilane groups through urea bridges) and sulfolane and it incorporates the I₃^–/I^– redox couple. It is shown that the combination of these two reagents prevents crystallization of KI, thus ensuring a long life for the cell and a satisfactory overall efficiency that surpasses 5 %. Cell efficiency increases with temperature. Optimization of gel‐electrolyte performance has been obtained by studying mobility with fluorescence‐quenching techniques complemented by direct‐current conductivity measurements.     

Ionic conductivity, infrared and Raman spectroscopic studies of 1-methyl-3-propylimidazolium iodide ionic liquid with added iodine

Polyiodides (I_x⁻, x = 3 and 5) and 2I⁻…I₂ adducts were established from the Raman spectra study of 1-methyl-3-propylimidazolium iodide (MPIm⁺I_x⁻; 1 ≤ x ≤ 5) ionic liquids containing various amounts of iodine (0 mol ≤ I₂ ≤ 2 mol). The existence of I₃⁻ and 2I⁻…I₂ was established for 1 ≤ x ≤ 2.5, symmetric I₃⁻ ions for x = 3, while linear and discrete I₅⁻ was substantiated for 3 ≤ x ≤ 5. The presence of polyiodide species in MPIm⁺I_x⁻ (1 ≤ x ≤ 5) was correlated with an enhanced ionic conductivity, attributed to the established relay-type Grotthus mechanism. Two-step conductivity increase was also reflected in decrease of the hydrogen bond interactions between the CH ring groups and polyiodides. While in the concentration range 1 ≤ x ≤ 3 (triiodides and tetraiodides) IR bands changed only slightly in intensity, in the concentration range x > 3 the CH stretching bands (3040-3170 cm⁻¹) split and the new band at 1585 cm⁻¹ appeared in the IR spectra beside the already existing Im⁺ ring stretching mode at 1566 cm⁻¹.     

Microstructure of nanoscale zinc oxide crystallites

Nanosized ZnO particles were prepared using a simple precipitation method. First, hydrozincite was obtained by adding Na₂CO₃ aqueous solutions with different concentrations to a zinc acetate precursor, previously dissolved in ethanol. We observed that the starting concentration of the precursors and the water content used for the hydrolysis influenced the size of the hydrozincite particles. The formation of the ZnO nanoparticles began after heating the hydrozyncite to 200 °C, and even when heating to 600 °C nanosized ZnO particles of 20-50 nm were obtained without agglomeration. The morphology and crystallinity of the obtained solids were characterized using XRD, SEM and TEM.     

An Automatic DFT System for the Silc Silicon Compiler

This article discusses design for testability automation for the Silc silicon compiler under development at GTE Laboratories, Inc. Our modular design for testability uses both built-in self-test and scan-path techniques for Slic's full custom VLSI designs. A test controller coordinates the testing of the chip's modules. Testability evaluation is performed using controllability/observability methods, and using a method based on information theory. A testable-by-construction approach is followed in order to synthesize blocks of testable logic. A testability ?expert? manages testability knowledge during the synthesis process and makes the ultimate testability decisions.     

Prenatal diagnosis of 45,X/46,XY mosaicism with postnatal confirmation in a phenotypically normal male infant

Prenatal detection of chromosome mosaicism has always been a diagnostic dilemma. In 21 reported cases of chromosomal mosaicism in cultured amniotic fluid cells, only two cases had cytogenetic confirmation of the mosaicism. All 21 pregnancies resulted in either phenotypically normal liveborns or grossly normal abortuses. We report a case of XO/XY mosaicism detected prenatally and confirmed postnatally in a grossly normal male infant. The indication for prenatal cytogenetic diagnosis was advanced maternal age (38 years). A diagnosis of XO/XY mosaicism was made from two separate culture flasks of amniotic fluid cells, with 45,X cells predominating (86.4%). The Y chromosome was of normal size but carried no fluorescent band. The parents were counseled and were advised that the phenotype of XO/XY mosaicism can range from relative normality to sexual maldevelopment. They decided to continue this pregnancy. The infant was born at term and was a grossly normal male with normal penis and descended, normal-sized testes. Leukocyte culture from the cord blood and a skin fibroblast culture confirmed the mosaicism of XO/XY. The father's Y chromosome was of identical size and carried a small fluorescent band. It appears that an altered Y chromosome may be predisposed to anaphase lag leading to mosaicism.