Ge extraction from gasification fly ash

Water-soluble germanium species (GeS₂, GeS and hexagonal-GeO₂) are generated during coal gasification and retained in fly ash. This fact together with the high market value of this element and the relatively high contents in the fly ashes of the Puertollano Integrated Gasification in Combined Cycle (IGCC) plant directed our research towards the development of an extraction process for this element. Major objectives of this research was to find a low cost and environmentally suitable process. Several water based extraction tests were carried out using different Puertollano IGCC fly ash samples, under different temperatures, water/fly ash ratios, and extraction times. High Ge extraction yields (up to 84%) were obtained at room temperature (25 °C) but also high proportions of other trace elements (impurities) were simultaneously extracted. Increasing the extraction temperature to 50, 90 and 150 °C, Ge extraction yields were kept at similar levels, while reducing the content of impurities, the water/fly ash ratio and extraction time. The experimental data point out the influence of chloride, calcium and sulphide dissolutions on the Ge extraction.     

Digital Control of a Power Conditioner for Fuel Cell/Super-capacitor Hybrid System

This article proposes a digital control scheme to operate a proton exchange membrane fuel cell module of 1.2 kW and a super-capacitor through a DC/DC hybrid converter. A fuel cell has been proposed as a primary source of energy, and a super-capacitor has been proposed as an auxiliary source of energy. Experimental validation of the system implemented in the laboratory is provided. Several tests have been performed to verify that the system achieves excellent output voltage (V₀) regulation and super-capacitor voltage (V_SC) control under disturbances from fuel cell power (P_FC) and output power (P₀) as well as other perturbations described in analysis results.     

Inhibitory effect of melanins from Agaricus bisporus polyphenol oxidase and two different substrates on carboxypeptidases A and B activity

In recent years, some beneficial effects on health of melanins that are formed as a result of polyphenol oxidase action have been discovered. However, it is also known that similar polymers have a detrimental effect on proteases activity. Thus, the aim of this work was to assay whether melanins from two different substrates act as carboxypeptidase A and carboxypeptidase B inhibitors. It was found that melanin synthesized from l-tyrosine decreases both the apparent affinity between carboxypeptidases and their substrates and the maximum reaction rate. Consequently, it is possible to conclude that these melanins inhibit CPA and CPB activity in a mixed way. On the contrary, no inhibition was found in the case of melanin synthesized from 4-methylcatechol.     

Intravascular Ultrasound Tissue Characterization with Sub-class Error-Correcting Output Codes

Intravascular ultrasound (IVUS) represents a powerful imaging technique to explore coronary vessels and to study their morphology and histologic properties. In this paper, we characterize different tissues based on radial frequency, texture-based, and combined features. To deal with the classification of multiple tissues, we require the use of robust multi-class learning techniques. In this sense, error-correcting output codes (ECOC) show to robustly combine binary classifiers to solve multi-class problems. In this context, we propose a strategy to model multi-class classification tasks using sub-classes information in the ECOC framework. The new strategy splits the classes into different sub-sets according to the applied base classifier. Complex IVUS data sets containing overlapping data are learnt by splitting the original set of classes into sub-classes, and embedding the binary problems in a problem-dependent ECOC design. The method automatically characterizes different tissues, showing performance improvements over the state-of-the-art ECOC techniques for different base classifiers. Furthermore, the combination of RF and texture-based features also shows improvements over the state-of-the-art approaches.     

Online error correcting output codes

This article proposes a general extension of the error correcting output codes framework to the online learning scenario. As a result, the final classifier handles the addition of new classes independently of the base classifier used. In particular, this extension supports the use of both online example incremental and batch classifiers as base learners. The extension of the traditional problem independent codings one-versus-all and one-versus-one is introduced. Furthermore, two new codings are proposed, unbalanced online ECOC and a problem dependent online ECOC. This last online coding technique takes advantage of the problem data for minimizing the number of dichotomizers used in the ECOC framework while preserving a high accuracy. These techniques are validated on an online setting of 11 data sets from UCI database and applied to two real machine vision applications: traffic sign recognition and face recognition. As a result, the online ECOC techniques proposed provide a feasible and robust way for handling new classes using any base classifier.     

Significance of individual point mutations, T202C and C314T, in the human Lewis (FUT3) gene for expression of Lewis antigens by the human alpha(1,3/1,4)-fucosyltransferase, Fuc-TIII

The Lewis alpha(1,3/1,4)-fucosyltransferase, Fuc-TIII, encoded by the FUT3 gene is responsible for the final synthesis of Lea and Leb antigens. Various point mutations have been described explaining the Lewis negative phenotype, Le(a-b-), on erythrocytes and secretions. Two of these, T202C and C314T originally described in a Swedish population, have not been found as single isolated point mutations so far. To define the relative contribution of each of these two mutations to the Lewis negative phenotype, we cloned and made chimeric FUT3 constructs separating the T202C mutation responsible for the amino acid change Trp68 --> Arg, from the C314T mutation leading to the Thr105 --> Met shift. COS-7 cells were transfected and the expression of Fuc-TIII enzyme activity and the presence of Lewis antigens were determined. There was no decrease in enzyme activity nor of immunofluorescence staining on cells transfected with the construct containing the isolated C314T mutation compared with cells transfected with a wild type FUT3 allele control. No enzyme activity nor immunoreactivity for Lewis antigens was detected in FUT3 constructs containing both mutations in combination. The T202C mutation alone decreased the enzyme activity to less than 1% of the activity of the wild type FUT3 allele. These results demonstrate, that the Trp68 --> Arg substitution in human Fuc-TIII is the capital amino acid change responsible for the appearance of the Le(a-b-) phenotype on human erythrocytes in individuals homozygous for both the T202C and C314T mutations.     

Chemical dosing for sulfide control in Australia: An industry survey

Controlling sulfide (H₂S) production and emission in sewer systems is critical due to the corrosion and malodour problems that sulfide causes. Chemical dosing is one of the most commonly used measures to mitigate these problems. Many chemicals have been reported to be effective for sulfide control, but the extent of success varies between chemicals and is also dependent on how they are applied. This industry survey aims to summarise the current practice in Australia with the view to assist the water industry to further improve their practices and to identify new research questions. Results showed that dosing is mainly undertaken in pressure mains. Magnesium hydroxide, sodium hydroxide and nitrate are the most commonly used chemicals for sewers with low flows. In comparison, iron salts are preferentially used for sulfide control in large systems. The use of oxygen injection has declined dramatically in the past few years. Chemical dosing is mainly conducted at wet wells and pumping stations, except for oxygen, which is injected into the pipe. The dosing rates are normally linked to the control mechanisms of the chemicals and the dosing locations, with constant or profiled dosing rates usually applied. Finally, key opportunities for improvement are the use of mathematical models for the selection of chemicals and dosing locations, on-line dynamic control of the dosing rates and the development of more cost-effective chemicals for sulfide control.     

Experimental and analytical study of the structural response of segmental tunnel linings based on an in situ loading test.: Part 1: Test configuration and execution

During the last years the use of segmental linings in tunnels bored with tunnel boring machines (TBMs) have increased considerably. Despite this, uncertainties remain on the structural behavior of segmental tunnel linings. To overcome them, a new methodology for an in situ real scale test on this kind of tunnels was developed and applied on an experimental section placed at the new Line 9 (L9) of the metro of Barcelona. The main particularity of this test falls on its performance in the definitive placement of the rings and, therefore, in the real work conditions of the tunnel. The main advantage to previous real scale test experiences was the consideration of the real ground–structure interaction. The experimental section was composed by 15 rings built using steel fibers as a unique reinforcement. Significant loads were applied to the tunnel crown (max 3000 kN) by means of three hydraulic flat jacks embedded at the extrados of the loaded ring. A complete set of internal and external instrumentation was placed on the experimental section to obtain the necessary measurements to characterize the lining behavior. Such measurements were intensively treated and its main results are presented and analyzed in detail in this paper. This in situ test provides significant evidences of the structural response of SFRC segmental tunnel linings in hard ground conditions.     

Heterologous expression of an engineered truncated form of human Lewis fucosyltransferase (Fuc-TIII) by the methylotrophic yeast Pichia pastoris

A stable GS115 Pichia pastoris recombinant strain was constructed to secrete a truncated form of the human alpha(1,3/4) fucosyltransferase (amino acids 45-361). Enzyme production resulted from a secretory pathway based on the pre-pro- alpha mating factor signal sequence of the yeast Saccharomyces cerevisiae . Following its transit through the Golgi apparatus, the enzyme accumulated in the periplasmic space before its release in the culture broth (about 30 mg/l). Cell-enclosed enzyme ( approximately 0.16%) proved to be fairly stable for many freezing and thawing cycles and could be used several times as an immobilized catalyst. Soluble enzyme (>99.8%) representing the main protein of the culture broth (10%) has been characterized by Western-blotting, substrate specificities and kinetic parameters. The two forms (cell-enclosed and soluble) of recombinant enzyme may be used for in vitro synthesis of Lewisadeterminants.