Superconductivity in dilute Cu-Nb-Sn alloys containing Nb3Sn precipitates

The dilute Cu-Nb-Sn alloys containing small amounts of Nb and Sn less than 1 at % exhibited superconductivity after quenching from the liquid state and ageing. The best superconducting properties ( andJ _c=130 A cm^–2) in a Cu-0.30 at % Nb 0.15 at % Sn alloy were obtained when the sample was aged at 550° C for 384 h. This sample exhibited a structure of fine Nb₃Sn precipitates of 200 to 500Å diameter distributed homogeneously in the Cu matrix, and therefore it was concluded that superconductivity in these alloys resulted from the proximity effect of Nb₃Sn particles. In spite of the similar structure obtained by ageing at 800° C, the Cu-Nb-Sn alloys showed inferior superconducting properties compared to the Cu-0.4 at % Nb alloy and this would be explained qualitatively by the difference in the mean free path in the two alloys.     

Interdiffusion in Co-Mn alloys

Interdiffusion coefficient in cobalt-manganese alloys has been determined by Matano's method in the temperature range between 1133 and 1423 K on (pure Co)-(Co-30.28 at. pct Mn alloy) and (pure Co)-(Co-51.76 at. pct Mn alloy) couples. This, ∼D, has been found to increase with the increase of manganese content. However, the activation energy (∼Q) and frequency factor ( ₀) show a maximum at about 10 at. pct Mn. The concentration dependence of and has been discussed taking into account the thermodynamic properties of the alloy. The difference in between the ferro- and paramagnetic phases in Co-5 at. pct Mn alloy has been found to be 24 kJ/mol, which is larger, than that for the diffusion of Mn⁵⁴ in this alloy. Further it has been found that the Kirkendall marker moves toward manganese-rich side, showing that manganese atoms diffuse faster than cobalt atoms. From the marker shift, the intrinsic diffusion coefficients,D _Co andD _Mn, at 33 at. pct Mn have been determined as follows:D _Co=0.22×10⁻⁴ exp(−263 kJ mol⁻¹/RT) m²/s, andD _Mn=0.98×10⁻⁴ exp(−229 kJ mol⁻¹/RT) m²/s.     

On intractability of the classUP

The classUP [V] is the class of sets accepted by polynomial-time nondeterministic Turing machines which have at most one accepting path for every input. The complexity of this class closely relates to that of computing inverses ofone-way functions, where a one-way function is a one-to-one, length-increasing, and polynomial-time computable function whose inverse cannot be computed within polynomial time. It is known [GS], [K] that there exists a one-way function if and only ifP UP. In this paper the intractability of sets inUP is investigated in terms of polynomial-time reducibility to a sparse set. It is shown thatUP has a set that is _m ^P -reducible to no sparse set ifP UP. We interpret this structural property in the relation with approximation algorithms: it is shown that ifP UP, thenUP has a set with no 1-APT approximation and, furthermore,UP has a set that is not _m ^P -reducible to any set with a 1-APT approximation. The implication of this result in the study of one-way functions is also discussed. In order to prove the main theorem, we introduce a variation of tree-pruning methods.This paper was written while the author visited the Department of Mathematics, University of California, Santa Barbara. This research was supported in part by the National Science Foundation under Grant CCR-8611980.     

An Extension of the Receiver Operating Characteristic Curve and AUC-Optimal Classification

While most proposed methods for solving classification problems focus on minimization of the classification error rate, we are interested in the receiver operating characteristic (ROC) curve, which provides more information about classification performance than the error rate does. The area under the ROC curve (AUC) is a natural measure for overall assessment of a classifier based on the ROC curve. We discuss a class of concave functions for AUC maximization in which a boosting-type algorithm including RankBoost is considered, and the Bayesian risk consistency and the lower bound of the optimum function are discussed. A procedure derived by maximizing a specific optimum function has high robustness, based on gross error sensitivity. Additionally, we focus on the partial AUC, which is the partial area under the ROC curve. For example, in medical screening, a high true-positive rate to the fixed lower false-positive rate is preferable and thus the partial AUC corresponding to lower false-positive rates is much more important than the remaining AUC. We extend the class of concave optimum functions for partial AUC optimality with the boosting algorithm. We investigated the validity of the proposed method through several experiments with data sets in the UCI repository.     

Morphological and crystallographic features of γ-γ′ Ni-Al and Ni-Al-Ti two-phase bicrystals

Several- Ni-Al and Ni-Al-Ti two-phase bicrystals were made by the solid-state diffusion couple method. Each couple consisted of a-phase single crystal and a pure-Ni polycrystal, and was annealed at 1473 K in an Ar gas atmosphere. Single crystal layers of-phase with uniform thickness always grow into the parent-phase single crystals. The resultant/ interface has no voids or facets regardless of the orientation of interface and the chemical composition of the-phase. Porosity formation due to the Kirkendall effect is observed in the diffused region. Concentration profiles exhibit nearly constant gradients in-phase. The orientation relationship between both phases is found to be 001//001, that is, the-phase grows epitaxially along the crystal orientation of-phase.     

Crystallite size distribution and the lattice distortions in highly γ-irradiated linear polyethylene

Crystallite size distributions and lattice distortions have been analysed for highly-irradiated linear polyethylene in the direction normal to 1 1 0 and 0 0 1 lattice planes through X-ray line profile analysis. It has been found that the lateral crystallite size is little affected irradiation greater than 1000 Mrad, whereas that in the chain direction decreases almost linearly with the dose of irradiation. A minor difference in the crystallite size between irradiation atmospheres, i.e. irradiation in air or in vacuum, has been disclosed at a very high dose of irradiation. The above degradation behaviour of crystallites and the change in lattice distortions have proved that radiation cross-links are mainly formed in the amorphous region near the lamellar surface of polyethylene.     

Bio-informatic activity modeling for human-artifacts symbiosis under resource boundedness

We investigate a biologically inspired design of an interface agent that is embedded inside human-artifact interactions rather than as an external observer, and has to work as an intelligent associate for a human user/operator in a time-critical situation like in an emergency. First, recent paradigmatic shifts of artifact design principles are discussed from an interdisciplinary viewpoint. Then, after the idea of Clancey’s activity modeling, we discuss the design principles of a situated interface agent. That is, different from the conventional supervisory agent’s task of seeking to optimize an isolated control task, such an agent has to be able to maintain its identity as an organism living within multiple contexts and looking inwards to consider the the nature of memory and perception, and looking outwards to consider the nature of social action with a human operator. Initially, our prior work using such a design principle is presented, and then decision-theoretic formulations of an interface agent’s activities are provided. This work was presented, in part, at the Third International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–21, 1998     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.     

基于Ti-MgF2金属陶瓷的高效率四层光热转换薄膜的研究

理论上研究了吸收层材料的光学常数,该常数满足从紫外线到近红外波长范围的四层结构的光子-热转换的高效率。通过使用有效介质近似（EMA）模型,复合材料（金属陶瓷）的光学性能与模拟材料的光学性能非常吻合。此外,提出了使用Ti-MgF₂金属陶瓷作为吸收层的具有高光子-热转换效率的四层膜结构,其在300~1 600 nm的波长范围内具有约95.1％的高吸收率。研究结果为实现高效率的光热转换器件提供了新途径,显示了优良的应用前景。     

Chemical sensing by an electrical oscillator: Detection and quantification of cationic surfactants

A new chemical sensing system using an electrical oscillator has been developed. This sensing system measures the electrical ‘non-linearity’ at the surface of an electrode immersed in a test solution: a sinusoidal voltage is applied to the electrode and the higher harmonics of the output current are obtained by Fourier transformation. This sensing system has been used to detect and quantify surfactant molecules in solutions. The relative intensity P₂/P₁ of the peaks of the second (P₂) and first (P₁) harmonics in the output current was found to be linearly correlated with the logarithms of the concentrations of cationic surfactants such as cetylpyridium bromide (CPB) and cetyl-N,N,N-trimethylammonium bromide (CTAB), but not with those of the anionic surfactant sodium dodecyl sulfate (SDS) or the neutral surfactant Triton X-100. The reproducibility of this sensing system was shown to be excellent.