Present status and future prospects of PV activities in Japan

The photovoltaic (PV) power systems in Japan made great strides in the past decade. The PV industry in the 1990s greatly depended on the research projects and dissemination programs carried out by the Ministry of International Trade and Industry. However, the industrial structure for full-scale deployment of the PV system is currently being established by the manufacturers’ continuous efforts to reduce the PV system cost and the government’s consecutive supports to create the initial market. It is expected that the synergetic effect of the cost reduction and incentives for introduction will activate the PV industry and its market more and more toward achieving 5000 MW of the capacity in FY 2010.     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

Atomic force microscopic study on DNA-wrapping for different diameter single-wall carbon nanotubes

DNA-wrapped single-wall carbon nanotubes (DNA-SWNT hybrids) prepared from different diameter HiPco- and Arc-SWNTs were investigated by atomic force microscopy. The mean diameter of DNA-HiPco-SWNT hybrids is 1.94 nm that is consistent with one HiPco-SWNT (~ 0.9 nm) wrapped by DNA (~ 1 nm). On the other hand, the mean diameter of DNA-Arc-SWNT hybrids is 3.74 nm that can correspond to one Arc-SWNT (~ 1.4 nm) wrapped by several layers of DNA. It is suggested that the DNA-wrapping mechanism for large diameter Arc-SWNTs is different from that for small diameter HiPco-SWNTs.     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

Evaluation of static and dynamic fracture toughness in ductile cast iron

Crack extension behavior and fracture toughness of ductile cast iron were examined by three-point bend tests, where various detection methods of crack initiation under static and dynamic loading conditions were adopted. Loading on the specimens was interrupted at various displacement points, and the final fracture surfaces of the specimen were observed via scanning electron microscopy (SEM). Crack-tip opening displacement (CTOD) obtained under the dynamic loading condition was smaller than that under the static loading condition in ferritic ductile cast iron, and CTOD additionally decreased with increasing pearlite content in the matrix. The relationship between J (ΔC) obtained by the compliance changing rate method and J(R) established by the intersection of the crack extension resistance curve and the theoretical blunting line varied with pearlite content. The average value of .J(ΔC) and J(R), that is J (mid), was proposed to define the fracture toughness of ductile cast iron; J (mid) was considered to be a reasonable measure for the fracture toughness of ductile cast iron, irrespective of loading condition and the pearlite content in the matrix.     

Blue electroluminescent devices withSrGa2S4:Ce for full-color display

In order to realize full-color electroluminescent (EL) displays, which are expected as a dominant candidate for the future multimedia flat panel display, blue EL devices with SrGa₂S₄:Ce have been prepared by molecular beam epitaxy (MBE). This paper proposes a novel deposition method employing Sr metal and Ga₂S₄ compound as the source materials. A single-phase SrGa₂S₄ layer is obtained in a Ga₂S₃/Sr flux ratio of 60 and at the growth temperature of 560°C. We have obtained the well-saturated blue with CIE color coordinates of x=0.14, y=0.14 and brighter blue EL devices made by optimizing the growth conditions in MBE. The maximum luminance of 70 cd/m² in comparison with the 3 cd/m₂ of our previous EL devices, is achieved at a driving frequency of 1 kHz     

Oxidation of methane to formaldehyde over Fe/SiO2 and Sn---W mixed oxides

In an attempt to develop new catalysts for the formation of formaldehyde from methane, the promotion effect of Fe on SiO₂ and that of Sn on WO₃ have been studied. The formation of formaldehyde on silica can be appreciably enhanced by the impregnation of Fe, as far as iron loadings are kept below 0.1 atom.% (Fe/Si × 100). In the case of Sn---W---Ox catalysts, both the addition of Sn to WO₃, and that of W on SnO₂ were effective to the selective formaldehyde formation. Absorption spectra (UV-Vis) and ESR measurements revealed that tetrahedrally coordinated Fe³⁺ in the silica network plays an important role in the formation of formaldehyde. A thin surface layer consisting of W and Sn oxides can account for the selective formaldehyde formation on the Sn---W---Ox catalysts.     

Monolithic rat-race mixers for millimeter waves

In this paper, we report on fully monolithic millimeter-wave Schottky-barrier diode (SBD) down-converters with an IF amplifier using heterojunction bipolar transistors (HBT's). A rat-race circuit is used for the mixer, and is analyzed using a harmonic-balance simulator. The measured conversion gain and the isolation are 7.1 and 29 dB in the V-band design, and 8.0 and 25 dB in the W-band design, respectively. The conversion gains are matched well with the circuit simulation     

Comparison of the effect of a proteolytic enzyme dispase and a chelator for the preparation of epidermal sheet from nude mice.

Histochemical studies of epidermal Langerhans cells require well-preserved epidermal sheets. We studied the conditions for the preparation of the epidermal sheets from the skin of the ear, hind limb and trunk of nude mice. Two types of commercial dispase, and ethylenediaminetetraacetic acid (EDTA), were used at several concentrations and the effects were compared. Dermo-epidermal separation was evaluated by the preservation of ATPase activity of Langerhans cells in the epidermal sheet and by the ultrastructure of epidermal cells (Langerhans cells and keratinocytes) as well as epidermal-dermal junction. Good separation depended on the combination of the concentration of the reagent and site of the skin. The concentrations of both dispase and EDTA effective for separation of the epidermis in the nude mouse were lower than those in other mouse strains reported.