The relationship between ductility and grain-boundary precipitates in an Al-6.0% Zn-2.6% Mg alloy

The relationship between ductility and material parameters such as grain-boundary (GB) precipitate size and dimple size in an Al-6.0% Zn-2.6% Mg alloy has been studied. Under the condition of a given GB precipitate size, the ductility increases with decreasing number of GB precipitates and dimples per unit area. The critical GB precipitate sizes acting as the nuclei for void formation are deduced.     

Isolation and characterization of a novel gene encoding alpha-L-arabinofuranosidase from Aspergillus oryzae

We cloned and characterized a novel gene (abfA) encoding alpha-L-arabinofuranosidase (alpha-L-AFase) from Aspergillus oryzae. One clone homologous to the alpha-L-AFase gene of Thermotoga maritima was found in an expressed sequence tag (EST) library of A. oryzae and a corresponding gene was isolated. Molecular analysis showed that the abfA gene carried six exons interrupted by five introns and had an open reading frame encoding 481 amino acid residues. The amino acid sequence similarity at active sites to the alpha-L-AFases from other organisms indicated that the alpha-L-AFase encoded by abfA was classified as a family 51 glycoside hydrolase. When the abfA was overexpressed in the homologous hyperexpression system of A. oryzae, a large amount of alpha-L-AFase was produced as intracellular protein. The apparent molecular mass of the purified enzyme was estimated to be 228,000 by gel filtration and that of its subunit as 55,000 by SDS-PAGE, suggesting that the enzyme is a tetramer. The enzyme hydrolyzed p-nitrophenyl-alpha-L-arabinofuranoside but not other p-nitrophenyl glycosides. These results demonstrated that the abfA gene encodes a functional alpha-L-AFase.     

Effect of lattice constant of zinc oxide on antibacterial characteristics

Zinc oxide powders were heated in different atmospheres at 800 and 1400 degrees C, of which the characterization and the antibacterial activity were studied by X-ray diffractometry and the measurement of the change in electrical conductivity with bacterial growth. The diffraction peaks corresponding to zinc oxide with hexagonal type structure were detected in all samples, which shifted in low-angle side with the increase in the oxidizability of atmosphere during heat-treatment. From the results of calculating lattice constants, a0 and c0, it was found that the value of c0 in hexagonal structure increased with the increase in the oxidizability of atmosphere. On the samples heated at 1400 degrees C, the changes of the c0 value were less than those at 800 degrees C. However, no change of the a0 value showed, irrespective of atmosphere and temperature. Hydrogen peroxide that contributes to the occurrence of antibacterial activity was found to generate from all samples, and the generation amount increased with the increase of c0 value; incidently the amount in the samples heated at 1400 degrees C was less than that at 800 degrees C. The antibacterial activity of zinc oxide increased with the increase of c0 value; that is, it was found that the value of c0 in crystal structure affected the antibacterial activity of zinc oxide.     

Finite element iterative techniques for determining the interface boundary between Laplace and Poisson domains—characteristic analysis of a field effect transistor

Two kinds of techniques for solving a shape determination problem are proposed. The determination of the interface boundary between two domains governed by Poisson and Laplace equations under the compatible and constraint condition is considered. Influence coefficient and inverse variational approaches are examined by using the iterative finite element procedure. A two-dimensional model of a junction-type field effect transistor is a test example. The determination of its interface boundary and the prediction of the potential distribution and static characteristic are demonstrated.     

Dynamic observations of the fracture phenomena in alpha/beta brass two-phase bicrystals

In situ dynamic observations of the deformation and fracture characteristics of alpha/beta brass two-phase bicrystals were made by the solid diffusion method. The results indicated clearly that the crack initiation site was at the interface. The crack propagation direction, in both the alpha and beta phases, was found to be orientation dependent. Complementary experiments on alpha and beta brass single crystals confirmed the theories and results obtained previously on ductile single crystals.On leave from the Mechanical Engineering Department, Al-Azhar University, Cairo, Egypt.     

Size-dependent volatility of diesel nanoparticles: chassis dynamometer experiments

We analyzed the size-dependent volatility of nanoparticles in a diameter range of 30-70 nm in diesel exhaust emissions. The test system included a medium-duty diesel truck on a chassis dynamometer, a single-stage dilution tunnel, a tandem differential mobility analyzer (TDMA) equipped with an electric furnace, and a condensation particle counter. The size shifts of monodispersed diesel nanoparticles under changing furnace temperatures were measured by TDMA in the gas phase. Together with the reduction of average particle size and volume, we observed the development of bimodal size distributions resulting from the separation between semivolatile and nonvolatile species as the furnace temperature was increased. While 91-98% of the particles were found to be semivolatile species by total volume during the idling engine condition, only 6-9% were semivolatile during the one-half engine load condition. We also found that smaller particles contained a larger fraction of semivolatile species.     

MgATP-induced conformational changes in a single myosin molecule observed by atomic force microscopy: periodicity of substructures in myosin rods

This paper discusses the conformational changes in a single myosin molecule directly observed using atomic force microscopy (AFM). The myosin molecules were pretreated in rigor solutions without MgATP or in relaxed solutions with various concentrations of MgATP. The images of these molecules were obtained using a tapping mode AFM. The results indicate that the orientation of the myosin's heads and tail strongly depend on the MgATP concentration. Without using MgATP, almost all of the myosin molecules are in the extended form; however, when MgATP is used, the molecules bend according to the level of MgATP concentration. The mean-square end-to-end distance of the myosin molecules is significantly shorter with p[MgATP] = 4 than with p[MgATP] = 6. The rod region did not show the same level of intensity along their length in the extended form. The rods exhibited clusters of discontinuity, which were identified as substructures. The size of these substructures change at intervals that are multiples of 14.3-14.5 nm, which reflects the periodicity of the alpha-helical coiled coils. The substructure clusters also correspond to the myosin crossbridge spacing in muscles (14.3 or 43 nm). These results suggest that the myosin's head bends in conjunction with the bending or tilting in the helical substructures. Conformational changes of the myosin molecule induced by MgATP seem to mimic the molecular motions in a muscle's force generation process.     

A Novel KCaNi/α-Al2O3 Catalyst for CH4 Reforming with CO2

A potassium and calcium co-promoted nickel catalyst (KCaNi/-Al₂O₃) prepared by a direct impregnation method possessed a high activity, high stability and excellent coke resistance properties in CH₄ reforming with CO₂. XRD, XPS and H₂-TPR characterizations indicated that (i) Ca and K strengthened the interaction between Ni and -Al₂O₃ and promoted the formation of a unique NiAl₂O₄ phase on the surface of the catalyst and (ii) Ca and K increased the dispersion of Ni and retarded its sintering. Coking reactions (CH₄ temperature-programmed decomposition and O₂-TPO) disclosed that K reduced carbon formation via CH₄ decomposition.     

Discrimination of psychoactive fungi (commonly called "magic mushrooms") based on the DNA sequence of the internal transcribed spacer region

'Magic mushrooms' (MMs) are psychoactive fungi containing the hallucinogenic compounds, psilocin (1) and psilocybin (2). Since June 6, 2002, these fungi have been regulated by the Narcotics and Psychotropics Control Law in Japan. Because there are many kinds of MMs and they are sold even as dry powders in local markets, it is very difficult to identify the original species of the MMs by morphological observation. Therefore, we investigated the internal transcribed spacer (ITS) region in the ribosomal RNA gene of MMs obtained in Japanese markets to classify them by a genetic approach. Based on the size and nucleotide sequence of the ITS region amplified by PCR, tested MMs were classified into 6 groups. Furthermore, a comparison of the DNA sequences of the MMs with those of authentic samples or with those found in the databases (GenBank, EMBL and DDBJ) made it possible to identify the species of tested MMs. Analysis by LC revealed that psilocin (1) was contained at the highest level in Panaeolus cyanescens among the MMs, but was absent in the Amanita species.     

Profile structure of magnetic flux lines in type-II superconductor from a rectangular electron hologram

Profile magnetic configuration of a quantized flux line and flux-line lattice penetrating a type-II superconductor thin foil, niobium, was observed by electron holography and Lorentz microscopy using a 300 kV field-emission electron microscope. Each single flux line was distributed periodically as lattice structure in the mixed state just below its critical temperature of 8.5 K, while at low temperature of 5 K the flux lines were weakly bound as bundles. In order to observe the flux-line distribution over a wide area, discrete Fourier transform reconstruction in the holography was extended for a rectangular area without loss of information and data precision.