Increased HDL Size and Enhanced Apo A-I Catabolic Rates Are Associated With Doxorubicin-Induced Proteinuria in New Zealand White Rabbits

The catabolism and structure of high‐density lipoproteins (HDL) may be the determining factor of their atheroprotective properties. To better understand the role of the kidney in HDL catabolism, here we characterized HDL subclasses and the catabolic rates of apo A‐I in a rabbit model of proteinuria. Proteinuria was induced by intravenous administration of doxorubicin in New Zealand white rabbits (n = 10). HDL size and HDL subclass lipids were assessed by electrophoresis of the isolated lipoproteins. The catabolic rate of HDL‐apo A‐I was evaluated by exogenous radiolabelling with iodine‐131. Doxorubicin induced significant proteinuria after 4 weeks (4.47 ± 0.55 vs. 0.30 ± 0.02 g/L of protein in urine, P < 0.001) associated with increased uremia, creatininemia, and cardiotoxicity. Large HDL2b augmented significantly during proteinuria, whereas small HDL3b and HDL3c decreased compared to basal conditions. HDL2b, HDL2a, and HDL3a subclasses were enriched with triacylglycerols in proteinuric animals as determined by the triacylglycerol‐to‐phospholipid ratio; the cholesterol content in HDL subclasses remained unchanged. The fractional catabolic rate (FCR) of [¹³¹I]‐apo A‐I in the proteinuric rabbits was faster (FCR = 0.036 h^?1) compared to control rabbits group (FCR = 0.026 h^?1, P < 0.05). Apo E increased and apo A‐I decreased in HDL, whereas PON‐1 activity increased in proteinuric rabbits. Proteinuria was associated with an increased number of large HDL2b particles and a decreased number of small HDL3b and 3c. Proteinuria was also connected to an alteration in HDL subclass lipids, apolipoprotein content of HDL, high paraoxonase‐1 activity, and a rise in the fractional catabolic rate of the [¹³¹I]‐apo A‐I.     

Optimal control and the Pontryagin's principle in chemical engineering: History,theory, and challenges

In the mid-1950s, Pontryagin et al. published a principle that became a fundamental concept in optimal control (OC) theory. The principle provides theoretical and practical methods to find the solution of OC problems, in particular, open-loop control problems. In chemical engineering, the principle has played an important role as a decision making framework for more than 60 years. This study gathers the main contributions on the application of the Pontryagin's principle to the dynamic optimization of chemical processes. A concise overview of the optimality conditions for a wide class of constrained OC problems is provided. Numerical methods to solve the necessary conditions and strategies to address inequality constraints are summarized. The information and illustrative case study presented in this work can be used as a guide to implement the principle in different settings. Opportunities for further application of the principle in relevant chemical engineering problems are also discussed.     

Hydrogenation of vegetable oil using highly dispersed Pt/γ-Al2O3 catalyst: Effects of key operating parameters and deactivation study

In the present work, Pt/γ-Al₂O₃ catalysts with high metal dispersion were prepared and characterized using chloroplatinic acid and platinum acetylacetonate as metal precursors. The activity and selectivity of the catalysts were evaluated in the hydrogenation of sunflower oil. A comprehensive analysis of the effects of key operational parameters on catalytic performance was carried out. The experimental variables were hydrogen pressure (275.8–551.6 kPa), temperature (160–200°C), and catalyst loading (0.005–0.015 kg Pt_exp/m³_oil). Platinum catalysts were active, with a double bond conversion of 28% at 2 h. The metal precursor affected catalyst selectivity. The catalyst prepared with chloroplatinic acid exhibited a lower formation of trans-isomers compared with Pt acetylacetonate. The γ-Al₂O₃ supported platinum catalyst with a metal loading of 0.51 wt.% and a metal dispersion of 98% maintained its initial catalyst activity and selectivity after 10 consecutive uses (1200 min accumulate operation time), without changes in its catalytic properties. The obtained results suggested that Pt catalysts are an attractive alternative to conventional nickel catalysts for the hydrogenation of vegetable oil.     

Neural Crest-Derived Stem Cells (NCSCs) Obtained from Dental-Related Stem Cells (DRSCs): A Literature Review on Current Knowledge and Directions toward Translational Applications

Evidence from dental-related stem cells (DRSCs) suggests an enhanced potential for ectodermal lineage differentiation due to their neural crest origin. Growing evidence that DRSC cultures can produce cells with a neural crest-derived stem cell (NCSC)-like phenotype supports their potential for future therapeutic approaches for neurodegenerative diseases and nerve injuries. However, most of the evidence is limited to the characterization of DRSCs as NCSCs by detecting the expression of neural crest markers. Only a few studies have provided proof of concept of an improved neuro-glial differentiation or direct applicability in relevant models. In addition, a current problem is that several of the existing protocols do not meet manufacturing standards for transferability to a clinical scenario. This review describes the current protocols to obtain NCSCs from DRSCs and their characterization. Also, it provides important considerations from previous work where DRSCs were established and characterized as mesenchymal stromal cells but studied for their neuro-glial differentiation potential. The therapeutic advancement of DRSCs would depend on establishing protocols that can yield a neural crest-like phenotype efficiently, using appropriate manufacturing standards and testing them in relevant models of disease or injury. Achieving these conditions could then facilitate and validate the therapeutic potential of DRSC-NCSCs in regenerative therapies.     

Smith predictor based-sliding mode controller for integrating processes with elevated deadtime

An approach to control integrating processes with elevated deadtime using a Smith predictor sliding mode controller is presented. A PID sliding surface and an integrating first-order plus deadtime model have been used to synthesize the controller. Since the performance of existing controllers with a Smith predictor decrease in the presence of modeling errors, this paper presents a simple approach to combining the Smith predictor with the sliding mode concept, which is a proven, simple, and robust procedure. The proposed scheme has a set of tuning equations as a function of the characteristic parameters of the model. For implementation of our proposed approach, computer based industrial controllers that execute PID algorithms can be used. The performance and robustness of the proposed controller are compared with the Matausek-Mici? scheme for linear systems using simulations.     

Dynamic airflow simulation within an isolation room

In many hospitals, isolation rooms are used to contain patients who are highly infectious, and the spread of air and bacteria within the isolation room is closely relates to room air distribution. This article uses the computational fluid dynamics (CFD) method to investigate the effects of a moving person and the opening and closing of a sliding door on room air distribution, including velocity, pressure and contaminant fields. Dynamic meshes are employed to simulate the movement of the walking person and sliding door. According to numerical results, the impact of those moving objects on room air distribution is addressed in this study.     

Feasibility study of the cut and weld operations by RH on the cooling pipes of ITER NB components

The maintenance operations of ITER NB components inside the vessel - Beam Line Components (BLC's) involve the removal of the faulty component, its transport to the hot cell as well as the reverse operations of transport of the repaired/new component and its reinstallation inside the vessel. Prior to the removal of the BLC's the cooling pipes must be detached from the component following a procedure that applies to the cutting of the pipes and subsequent welding when the component is re-installed. The purpose of this study, conducted in the framework of EFDA, is to demonstrate the feasibility of the cut and weld operations on the water pipes of the BLC's using fully remote handling techniques. Viable technologies for the cut and weld operations have been identified within the study; in particular the following aspects will be presented in the paper:

• Different strategies can be pursued in the detachment of the components depending on the number of cut and weld operations to be performed on the pipes. The selected strategy will impact on the procedure to be followed likewise on important aspects as the requirements of the flexible joints assembled on the pipes.

• The existing cutting techniques have been examined in the light of the remotely performed pipe cutting at the NB cell. Modifications of commercial tools have been proposed in order to adapt them to the BLC's pipes requirements. The debris produced during the cutting process must be controlled and collected, therefore a cleaning system has been integrated in the adapted cutting tool referred above.

• The existing welding techniques have been also examined and compared based on different criteria such as complexity, reliability, alignment tolerances, etc. TIG welding is the preferred technique as it stands out for its superior performance. The commercial tools identified need to be adapted to the NB environment.

• The alignment of the pipes is a critical issue concerning the remote welding. A proper alignment system has been proposed taking into account the pre-selected welding technique.

Modification of the optical and structural properties of ZnO nanowires by low-energy Ar+ ion sputtering

The effects of low-energy (≤2 kV) Ar⁺ irradiation on the optical and structural properties of zinc oxide (ZnO) nanowires (NWs) grown by a simple and cost-effective low-temperature technique were investigated. Both photoluminescence spectra from ZnO NW-coated films and cathodoluminescence analysis of individual ZnO NWs demonstrated obvious evidences of ultraviolet/visible luminescent enhancement with respect to irradiation fluence. Annihilation of the thinner ZnO NWs after the ion bombardment was appreciated by means of high-resolution scanning electron microscopy and transmission electron microscopy (TEM), which results in an increasing NW mean diameter for increasing irradiation fluences. Corresponding structural analysis by TEM pointed out not only significant changes in the morphology but also in the microstructure of these NWs, revealing certain radiation-sensitive behavior. The possible mechanisms accounting for the decrease of the deep-level emissions in the NWs with the increasing irradiation fluences are discussed according to their structural modifications.