Polysaccharide‐based membranes loaded with erythromycin for application as wound dressings

In this study, the antibiotic erythromycin (Ery) was incorporated into chitosan (Ch)–alginate (A) and Ch–xanthan (X) membranes with the aim of using them as bioactive wound dressings. Drug incorporation was performed by direct addition (DA) to the polysaccharide mixture and by membrane impregnation in solution (IS). A higher incorporation efficiency was obtained for DA, but higher amounts of drug were loaded into membranes by the IS method (maxima ≈ 2.1 and 0.7 g/g for Ch–X and Ch–A, respectively) because the initial concentration of drug could be higher than that in the DA method. Ery release in phosphate‐buffered saline was slow, reaching about 12 and 32 mg of drug/g of membrane in 60 h for Ch–X and 4 and 16 mg/g for Ch–A by the DA and IS methods, respectively. With formulations prepared with IS, the required therapeutic dosage was reached within 60 h, whereas for those incorporating the drug by DA, prolonged use would be required. Both membrane types behaved as drug reservoirs, providing continuous antibiotic release to the wound site. Formulations with higher drug contents showed effective antibacterial activity against two species of bacteria commonly found in skin lesions, Staphylococcus aureus and Pseudomonas aeruginosa, and were thus potentially capable of protecting the wound site from bacterial attack. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43428.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Mechanistic Studies of the Solvolyses of Carbamoyl Chlorides and Related Reactions

Carbamoyl chlorides are important intermediates, both in the research laboratory and in industrial scale syntheses. The most studied and used are the disubstituted derivatives, incorporating either aryl or alkyl groups (Ar₂NCOCl or R₂NCOCl). Sometimes, the groups are tied back to give a ring and piperidino- and morpholino-derivatives are commonly encountered. Some studies have been made with two different groups attached. Solvolyses tend to occur at the carbonyl carbon, with replacement of the chloride ion. Studies of both rate and products are reviewed and the solvolysis reactions are usually S_N1, although addition of an amine leads to a superimposable bimolecular component. Many of the studies under solvolytic conditions include the application of the extended Grunwald–Winstein equation. The monosubstituted derivatives (ArNHCOCl or RNHCOCl) are less studied. They are readily prepared by the addition of HCl to an isocyanate. In acetonitrile, they decompose to set up and reach equilibrium with the isocyanate (ArNCO or RNCO) and HCl. Considering that the structurally related formyl chloride (HOCOCl) is highly unstable (with formation of HCl + CO₂), the unsubstituted carbamoyl chloride (H₂NCOCl) is remarkably stable. Recommended synthetic procedures require it to survive reaction temperatures in the 300–400 °C range. There has been very little study of its reactions.     

In Vitro Activity of Copper(II) Complexes,Loaded or Unloaded into a Nanostructured Lipid System,against Mycobacterium tuberculosis

Tuberculosis (TB) is an infectious disease caused mainly by the bacillus Mycobacterium tuberculosis (Mtb), presenting 9.5 million new cases and 1.5 million deaths in 2014. The aim of this study was to evaluate a nanostructured lipid system (NLS) composed of 10% phase oil (cholesterol), 10% surfactant (soy phosphatidylcholine, sodium oleate), and Eumulgin^® HRE 40 ([castor oil polyoxyl-40-hydrogenated] in a proportion of 3:6:8), and an 80% aqueous phase (phosphate buffer pH = 7.4) as a tactic to enhance the in vitro anti-Mtb activity of the copper(II) complexes [CuCl₂(INH)₂]·H₂O (1), [Cu(NCS)₂(INH)₂]·5H₂O (2) and [Cu(NCO)₂(INH)₂]·4H₂O (3). The Cu(II) complex-loaded NLS displayed sizes ranging from 169.5 ± 0.7095 to 211.1 ± 0.8963 nm, polydispersity index (PDI) varying from 0.135 ± 0.0130 to 0.236 ± 0.00100, and zeta potential ranging from −0.00690 ± 0.0896 to −8.43 ± 1.63 mV. Rheological analysis showed that the formulations behave as non-Newtonian fluids of the pseudoplastic and viscoelastic type. Antimycobacterial activities of the free complexes and NLS-loaded complexes against Mtb H₃₇Rv ATCC 27294 were evaluated by the REMA methodology, and the selectivity index (SI) was calculated using the cytotoxicity index (IC₅₀) against Vero (ATCC^® CCL-81), J774A.1 (ATCC^® TIB-67), and MRC-5 (ATCC^® CCL-171) cell lines. The data suggest that the incorporation of the complexes into NLS improved the inhibitory action against Mtb by 52-, 27-, and 4.7-fold and the SI values by 173-, 43-, and 7-fold for the compounds 1, 2 and 3, respectively. The incorporation of the complexes 1, 2 and 3 into the NLS also resulted in a significant decrease of toxicity towards an alternative model (Artemia salina L.). These findings suggest that the NLS may be considered as a platform for incorporation of metallic complexes aimed at the treatment of TB.     

Isothermal crystallization kinetics of poly(lactic acid)/synthetic mica nanocomposites

The isothermal crystallization kinetics of PLA/fluoromica nanocomposites was studied. Three types of synthetic mica at three concentrations (2.5, 5.0, and 7.5 wt % mica) were used and the effect of these micas on the crystallization and thermal properties of PLA was investigated by differential scanning calorimetry (DSC). The Avrami and Hoffman‐Weeks equations were used to describe the isothermal crystallization kinetics and melting behavior. Addition of these micas to the PLA matrix increased the crystallization rate, and this effect depended on the mica type and concentration. While the nonmodified Somasif ME‐100 exerted the smallest effect, the effect observed for the organically modified Somasif MPE was the most pronounced. The lower half‐time of crystallization t_1/2 was around 3 min for the PLA/Somasif MPE nanocomposites containing 7.5 wt % of filler at 90°C, which is about 16 min below that found for neat PLA. The equilibrium melting temperature ( ) of PLA were estimated for these systems, showing an increase in the composites and an increase with increasing loading, except for PLA/Somasif MPE, in which the increase of the mica content decreased about 5°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40322.     

Mechanical properties of in situ composites based on partially miscible blends of polyetherimide and liquid crystalline polymers

Results related to the mechanical properties of in situ composites based on partially miscible blends of polyetherimide (Ultem) and liquid crystalline polymers (HX1000 and HX4000) are discussed. It is observed that, at least in terms of the tensile and flexural modulus, there is a positive deviation from the law of mixtures. These results are analyzed and an attempt is made to explain the origin of this synergistic behavior based upon morphological data. The behavior of these partially miscible systems is compared to that of an immiscible system (Ultem/Vectra) and also that of glass-reinforced Ultem. Using blends subjected to two passes through a single screw extruder, and thereby increasing the mixing history of the Ultem/HX4000 blend, led to improved dispersion but did not lead to any measurable improvement, within experimental error, in the tensile modulus or ultimate strength (though the toughness was enhanced). The dynamic creep compliance was measured and the creep behavior with composition and temperature is discussed. The data seem to suggest that a number of factors (including partial miscibility, the properties of the specific LCP chosen as the reinforcement and the final blend morphology) all interact in a complex and as yet undetermined manner to produce the enhanced mechanical properties.     

Characterization of novel thermoresponsive poly(butylene adipate-co-terephthalate)/poly(N-isopropylacrylamide) electrospun fibers

Polymer Bulletin - In this work, electrospun fibers of poly(butylene adipate-co-terephthalate) (PBAT) and poly(N-isopropylacrylamide) (PNIPAAm) blends, PBAT/PNIPAAm, with different mass ratios,...