Baseline water quality and macrophyte assemblages in Pampean streams: a regional approach

Streams of the pampas region (central Argentina) are characterized by the lack of riparian forests and by low current velocities, and receive a large amount of industrial and domestic effluents. Intensive agriculture in the region has greatly increased during the last years; nevertheless, regional studies to determine baseline conditions are not available. Here, we characterized pampean streams considering physico-chemical water features and the composition of macrophyte communities, and we established if the regions proposed by an early hydrological regionalization show differentiated water chemistry and macrophyte assemblages. Forty-one streams were sampled in autumn, spring and summer. Streams were characterized by alkaline waters, with high conductivities and dissolved oxygen concentrations, and they can be classified as eutrophic. A good discrimination among regions was achieved based on streamwater features in all seasons; variables that most contribute to the discrimination were related to pH, eutrophication, and conservative ions. Regional differences may be due to variations in water availability, parent material, and land use practices. The aquatic plant communities reflected the eutrophic state of waters, but macrophyte composition was not useful to differentiate among regions because it is not affected by differences in water chemistry. Macrophyte species grouped according to their growth form and assemblage distribution were related to chemical variables (as conductivity and nitrate) and possibly to flow conditions.     

Yield estimation and forecasting for winter wheat in Hungary using time series of MODIS data

Wheat is one of the most important crops in Hungary, which represents approximately 20% of the entire agricultural area of the country, and about 40% of cereals. A robust yield method has been improved for estimating and forecasting wheat yield in Hungary in the period of 2003–2015 using normalized difference vegetation index (NDVI) derived from the data of the Moderate Resolution Imaging Spectroradiometer. Estimation was made at the end of June – it is generally the beginning of harvest of winter wheat in Hungary – while the forecasts were performed 1–7 weeks earlier. General yield unified robust reference index (GYURRI) vegetation index was calculated each year using different curve-fitting methods to the NDVI time series. The correlation between GYURRI and country level yield data gave correlation coefficient (r) of 0.985 for the examined 13 years in the case of estimation. Simulating a quasi-operative yield estimation process, 10 years’ (2006–2015) yield data was estimated. The differences between the estimated and actual yield data provided by the Hungarian Central Statistical Office were less than 5%, the average difference was 2.5%. In the case of forecasting, these average differences calculated approximately 2 and 4 weeks before the beginning of harvest season were 4.5% and 6.8%, respectively. We also tested the yield estimation procedure for smaller areas, for the 19 counties (Nomenclature of Territorial Units for Statistics-3 level) of Hungary. We found that, the relationship between GYURRI and the county level yield data had r of 0.894 for the years 2003–2014, and by simulating the quasi-operative forecast for 2015, the resulting 19 county average yield values differed from the actual yield as much as 8.7% in average.     

Robust production planning and control for multi-stage systems with flexible final assembly lines

Production planning of final assembly systems is a challenging task, as the often fluctuating order volumes require flexible solutions. Besides, the calculated plans need to be robust against the process-level disturbances and stochastic nature of some parameters like manual processing times or machine availability. In the paper, a simulation-based optimisation method is proposed that utilises lower level shop floor data to calculate robust production plans for final assembly lines of a flexible, multi-stage production system. In order to minimise the idle times when executing the plans, the capacity control that specifies the proper operator–task assignments is also determined. The analysed multi-stage system is operated with a pull strategy, which means that the production at the final assembly lines generates demands for the preceding stages providing the assembled components. In order to guarantee the feasibility of the plans calculated for the final assembly lines, a decomposition approach is proposed to optimise the production plan of preceding stages. By this way, the robust production can be ensured resulting in reduced losses and overall production costs even though the system is exposed to changes and disturbances.     

Reinforcement of single-walled carbon nanotube bundles by intertube bridging

During their production, single-walled carbon nanotubes form bundles. Owing to the weak van der Waals interaction that holds them together in the bundle, the tubes can easily slide on each other, resulting in a shear modulus comparable to that of graphite. This low shear modulus is also a major obstacle in the fabrication of macroscopic fibres composed of carbon nanotubes. Here, we have introduced stable links between neighbouring carbon nanotubes within bundles, using moderate electron-beam irradiation inside a transmission electron microscope. Concurrent measurements of the mechanical properties using an atomic force microscope show a 30-fold increase of the bending modulus, due to the formation of stable crosslinks that effectively eliminate sliding between the nanotubes. Crosslinks were modelled using first-principles calculations, showing that interstitial carbon atoms formed during irradiation in addition to carboxyl groups, can independently lead to bridge formation between neighbouring nanotubes.     

On the growth mechanism of single-walled carbon nanotubes by catalytic carbon vapor deposition on supported metal catalysts

A comprehensive kinetic study was performed to throw light on the formation mechanism of single walled carbon nanotubes (SWNTs) in chemical vapor deposition processes. SWNTs were synthesized by catalytic decomposition of methane or ethylene on supported transition metal catalysts. Kinetic curves (the amount of SWNT as a function of time) were obtained as a function of the nature and the preparation of the supported catalysts, temperature, the fluxes of the gases (the reagent hydrocarbon and the carrying gas), and the partial pressure of the hydrocarbon. The final products were characterized by transmission electron microscopy, Raman spectroscopy, chemical analysis, and thermogravimetric measurements. The fundamental factors determining the SWNT formation are discussed in detail, taking into consideration several observations from the literature as well.     

Preparation of a solid dispersion by a dropping method to improve the rate of dissolution of meloxicam

Application of a solid dispersion system is one of the methods used to increase the bioavailability of poorly water-soluble drugs. Adaptation of the dropping method from the chemical industry as a formulation procedure may help the scaling-up process and simplify the formulation of poorly water-soluble compounds. Meloxicam (ME), a nonsteroidal anti-inflammatory drug that is poorly soluble in water, and polyethylene glycol (PEG) 4000, a water-soluble carrier, were formulated by using a dropping method in an attempt to improve the dissolution of ME. Pure ME and physical mixtures and tablets of ME-PEG 4000 (1:3 ratio) were compared as regards their dissolution with samples formulated by the dropping method. The results revealed that the round particles (solid drops) exhibited a higher dissolution rate than those of the physical mixtures, tablets, and pure ME. Self-modeling curve resolution (SMCR) as a chemometric method was used to evaluate X-ray powder diffractometry (XRPD) data. The results demonstrated the presence of a new crystalline phase in the solid dispersion, which can help the fast and quantitative dissolution from the solid drops. The round particles can be adapted to individual therapy by using a distributor.     

Investigations onNb/Al-AlO x -Al/Nb proximity tunneling junctions for X-ray detection

A new Nb/Al-AlO_x-Al/Nb trilayer process using a movable mechanical slit for junction-detector applications is described. Best junctions have a quality factor of 42 mV with a Josephson current density of 1200 A/cm ² at 4.2 K. The temperature dependence of the sub-gap current in the range of 0.45 to 4.2 K has been measured. Deviations from the thermally activated behavior due to imperfections in the tunneling barrier are observed. We compare our simple method with the usual whole wafer processes and we discuss the influence of proximity effects in these junctions in terms of the models proposed by Golubov et al. and by McMillan.     

Nanocomposite bulk of mechanically milled Al-Pb samples consolidated pore-free by the high-energy rate forming technique

It is shown that pore-free bulk samples were produced by the high-energy rate forming axis-symmetrical powder compaction method for different application purposes in case of the very different, immiscible Al and Pb metal pair. The starting Al-Pb nanocomposites were made by mechanical milling of atomized Al and Pb powders either in a SPEX 9000 or a Fritsch Pulverisette 4 mill. Due to the conditions that milling was carried out in air, the PbO layer, originally existing at the surface of the atomized Pb powder, ruptured and was also dispersed in the composite. The presence of the nano PbO particles was proven by XRD and TEM (BF, DF, SAED). When the energy of milling was high, the PbO crystallites became so small that they could hardly be seen by XRD technique. Local distribution of the PbO nanoparticles was still visible in a TEM, using the process diffraction method. Both XRD and SAED proved to be useful for the evaluation of the results of the milling process and compaction.     

Microstructural development and creep deformation in equiaxed γ,γ + α2 and γ + α2 + B2 titanium aluminides

The development of microstructure and its influence on creep properties have been studied for structures including equiaxed γ, duplex, and other structures of varying α₂ morphology in two Ti-48Al-2Cr-2Nb alloys. Heat treatment at 1125°C have been utilized to produce equiaxed γ microstructures in alloys with or without Mo additions. The γ→α transformation produces α₂ plates with several orientation variants with γ grains during subsequent annealing of the equiaxed γ microstructures below the α transus. Formation of this α₂ morphology results from rapid up-quenching (UQ), and this structure persists through annealing, cooling, and creep testing. Differences in minimum creep rates for several microstructures, containing varying amounts of multi-or single variant γ/α₂ grains are shown to be minimal. The presence of Mo has also resulted in improved creep resistance in equiaxed γ and γ + α₂ + B2 structures, as compared to similar microstructures in the Ti-48Al-2Cr-2Nb alloy. Deformation during creep at 760 °C at stresses between 200 and 400 MPa occurs by a combination of twinning and dislocation glide without recrystallization, resulting in power-law stress exponents in the range of 6 to 9. Only minimal strain path dependence of the minimum creep rate is detected in a comparison of creep rates in stress jump, stress drop, and single stress tests. This article is based on a presentation made in the symposium “Fundamentals of Gamma Titanium Aluminides,” presented at the TMS Annual Meeting, February 10–12, 1997, Orlandom, Florida, under the auspices of the ASM/MSD Flow & Fracture and Phase Transformations Committees.