Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

关于飞行力学的再思考

对多年来国内外有关飞行力学的发展过程、研究范畴、分类，以及问题表述方式等重新进行了一些考察和思考．从学术和实践的观点，对飞行力学的体系结构和问题表述方式等进行了讨论，并提出了个人的一些看法和建议．     

柘林电站第二溢洪道砼鼻坎截水墙施工

柘林水电站第二溢洪道,在鼻坎先于下部截墙施工中,为了满足当年泄洪,施工先沿截墙自上而下挖掘交通竖井,支撑牢固,安设好提升设备并打通墙底导洞后,再自下而上分层扩挖及浇筑砼.开挖采用登渣作业,出渣用可伸缩手柄架子车经吊篮提升.墙顶砼浇筑,通过预留在鼻坎内的下料小井进料.     

照相冲洗间的若干建筑特点

愈来愈多的照相冲洗单位开展用１．５米宽或更宽的大型冲片设备冲洗大幅面彩色照片，为此需要建筑新的厂房以安装和运转有关的装备，本文诠面地阐述了这类厂房的建筑设计特点。     

薄壁圆管弯曲模设计

对L型薄壁圆管进行了工艺分析，并介绍了弯曲成形的模具结构及工作过程，阐述了划伤，起皱等关键问题的解决方法，并提出了有效的预防措施。     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

振冲法在砂场地地基处理中的应用

通过对典型振冲挤密法施工方法的研究，分析了该方法的加固机理，指出它可提高地基承载力、减少沉降和不均匀沉降，且能达到地基抗地震、抗液化能力的效果。     

Approximate sensitivity analysis for acyclic Markov reliability models

Acyclic Markov chains are frequently used for reliability analysis of nonmaintained mission-critical computer-based systems. Since traditional sensitivity (or importance) analysis using Markov chains can be computationally expensive, an approximate approach is presented which is easy to compute and which performs quite well in test cases. This approach is presented in terms of a Markov chain which is used for solving a dynamic fault-tree, but the approach applies to any acyclic Markov reliability model.