应用PLC变频控制的乙炔压缩机

本文介绍了应用西门子公司的LOG01可编程控制器（PLC）和艾墨森生产的变频器技术，使乙炔压缩机可以通过手动或者编程控制实现乙炔压缩机排气量的连续变化或分级输出，实现整机运行过程中的重要参数的实时监控和多项指标的极限报警，满足不同工况下的应用需求，节约能源和成本，提高了效益。     

Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

改进了的光场—boson元激发非线性耦合的激光模型

在我们最近提出的光场Ｂ－ｂｏｓｏｎ元激发耦合激光模型的基础上，通过附加一个抽运系统的速率方程，将原先的激光动力学加以改进，以图整个系统的运作趋于更完备的远离平衡自组织。经过这样改动以后，改进后激光动力系统的速率方程组和描述光场与二能级原子相互作用的麦克斯韦－布洛赫方程组在形式上也有其更加相似之处；两者的自由变量与外控参量都有一一对应关系。     

Integrated optimal structural and vibration control design

An integrated design procedure which is composed of structural design, control design, and actuator locations design is proposed in this paper. First, a composite objective function, formed by a structural and a control objective, is optimized in steady state through the homogenization design method. Then an independent modal space control algorithm (IMSC) is performed on this optimal structure to reduce the dynamic response. Finally, to minimize the control force while still obtaining the same modal response for the controlled modes, the optimal choice for actuator locations is discussed.Part of this paper was presented in the First World Congress of Structural and Multidisciplinary Optimization (held in Goslar, Germany, May 28–June 2, 1995).     

Optimal design of controlled structures

A formulation that finds the optimal design of a controlled structure is proposed. To achieve this goal, a composite objective composed of structural and control objectives is introduced to be optimized, and the effect of the control weighting is examined. A feedback control law is defined before the structural optimization and then the composite objective will only become a function of structural design variables. As a result, optimal structural design and control forces in steady state are obtained.Part of this paper was presented at WCSMO1 (First World Congress of Structural and Multidisciplinary Optimization), held in Goslar, Germany, May 28–June 2, 1995     

振兴三明地方水泥工业之我见

三明水泥行业经济效益连续两年大滑坡,造成滑坡的主要原因是价格太低,提出振兴的八点建议和三点教训。     

基于AUPF的TDOA几何定位跟踪算法研究

使用无源时差（TDOA）定位技术确定无人机等小型辐射源目标的位置是当前研究的热点,针对时差定位算法较为复杂的实际情况,推导了时差双曲线的几何解,并提出了一种基于自适应无迹粒子滤波（AUPF）技术的移动目标定位跟踪方法。通过仿真对该方法在不同场景的应用效果进行了验证,进一步比较分析了算法的定位精度。结果表明,基于自适应无迹粒子滤波的时差几何定位跟踪算法可以在多种情况下较好地拟合出目标真实运动轨迹,实现对运动目标的定位跟踪,同时拥有更低的定位误差和更高的轨迹包容度,使用该方法可以显著提高对非合作移动辐射源目标的位置估计性能。     

嵌入式三轴运动控制系统的以太网通信实现

研究了嵌入式三轴运动控制系统的以太网通信问题;采用LM3S9B92微控制器设计主控制器和各轴电动机控制器,通过移植实时操作系统μC/OS-Ⅱ和TCP/IP协议栈LwIP,实现主控制器与各轴电机控制器之间的信息交互;按电动机控制数据传输紧急程度要求不同,在以太网MAC层之上建立调度表,优先传输紧急数据,提高三轴运动控制系统实时性;实验结果表明嵌入式三轴运动控制系统实现了以太网数据的无差错传输,并且在重载情况下时间延迟大约为系统改进前的72%,改进了系统的实时性。     

微乳液泡沫驱油技术原理、挑战和研究进展

微乳液驱和泡沫驱是强化采油领域中的两个重要技术。前者利用表面活性剂形成油-水微乳液提高增溶能力,降低油水界面张力和毛细管阻力,从而提高驱替效率和微观采收率;后者利用泡沫剂将气体稳定地分散在水相中,在油藏孔隙中形成泡沫,封堵优势通道和已驱替区域,从而扩大波及体积并提高宏观采收率。通过综述两个技术的国内外发展历史和研究进展,阐明了其优势和局限性。近年来提出的微乳液泡沫驱油技术,又称为低张力泡沫驱,其既可以保留两个独立技术的优势,又可以克服他们的缺点,最终同时提高微观和宏观采收率。但是在实际研究中,微乳液泡沫驱技术却面临理论和应用上的双重挑战。通过调查国内外相关研究进展,详细阐述了微乳液泡沫驱技术目前面临的挑战、研发思路和研究建议。     

微量稀土和硼在铜及其合金中的作用

介绍了近年来微量稀土和硼在其合金中的应用，稀土在铜和铜合金中去除杂质，净化晶界，细化组织，消除柱状晶的作用，从而改善铜和铜合金的导电性，力学性能，冷热加工性能和耐磨性性能，硼在铜和铜合金中有比稀土更显著的细化晶粒作用。