Polymorphic transformations in sn-1, 3-distearoyl-2-ricinoleyl-glycerol

Polymorphic transformations of sn-1,3-distearoyl-2-ricinoleyl-glycerol (SRS) have been studied with differential scanning calorimetry, X-ray powder diffraction (XRD), synchrotron radiation X-ray diffraction, and Fourier transform infrared spectroscopy (FTIR) techniques by using a 99.8% pure sample. Four polymorphs, α, γ, β′₂, and β′₁, were isolated. The thermal behavior of the four forms showed that the fusion of α at 25.8°C was followed by the crystallization of γ which melts at 40.6°C, and β′₂ and β′₁ revealed melting peaks at 44.3 and 48.0°C, respectively. No β form was observed, even when the two β′ forms were annealed around their melting points over one week. The XRD long spacing indicates that α packs into a double chain-length structure; however, γ and the two β′ phases pack into a triple chain-length structure. The polarized and nonpolarized FTIR spectra in methylene scissoring and methylene rocking regions indicated a parallel subcell packing in γ, and a mixture of orthorhombic perpendicular and parallel or hexagonal subcells in the β′₂ and β′₁ phases. Consequently, SRS exhibits quite a unique polymorphic behavior, compared to tristearoyl glycerol and sn-1,3-distearoyl-2-oleoyl-glycerol.     

Antimicrobial activity of novel biocompatible wound dressings based on triblock copolymer hydrogels

Wound infection is a common complication often resulting in delayed healing with adverse clinical and financial consequences. Current antimicrobial treatments are far from ideal, side effects can include both bacterial resistance and toxicity. As a result, a great deal of effort over the last 20 years has been spent on investigating new forms of antimicrobial dressings. Here, we report the unexpected antimicrobial activity of a relatively new biocompatible thermo-responsive PHPMA–PMPC–PHPMA triblock copolymer gelator [where PHPMA denotes poly(2-hydroxypropyl methacrylate) and PMPC denotes poly(2-(methacryloyloxy)ethyl phosphorylcholine)]. In a radial diffusion assay, a 20% w/v copolymer gel produced an inhibitory zone up to six times greater than the corresponding control against Staphylococcus aureus. Similarly, in a broth inhibition assay the same copolymer reduced bacterial growth by 45% compared with control experiments conducted in the absence of any copolymer. Moreover, addition of the copolymer to a 3D-infected skin model reduced bacterial recovery by 38% compared to that of controls over 24–48 h. This is particularly relevant since these antimicrobial triblock copolymers were recently shown to be non-toxic when exposed to a tissue-engineered skin model. This antimicrobial activity was also successfully immobilised by grafting PMPC–PHPMA diblock copolymer brushes onto silicon wafers. Our results indicate that both PMPC–PHPMA diblock and PHPMA homopolymer brushes exhibit antimicrobial activity. Our hypothesis for the mode of action is that the moderately hydrophobic PHPMA chains penetrate the bacterial membrane, causing leakage of the cell contents. In summary, these gels and surfaces offer a promising new approach to antimicrobial dressings.     

Specificity of Infant Digestive Conditions: Some Clues for Developing Relevant In Vitro Models

Digestion of nutrients is an essential function of the newborn infant gut to allow growth and development and understanding infant digestive function is essential to optimize nutrition and oral drug delivery. Ethical considerations prohibit invasive in vivo trials and as a consequence in vitro assays are often conducted. However, the choice of in vitro model parameters are not supported by an exhaustive analysis of the literature and do not mimic precisely the digestive conditions of the infant. This review contains a compilation of the studies which characterized the gastroduodenal conditions in full-term or preterm infants of variable postnatal age from birth up to six months. Important data about healthy full-term infants are reported. The enzymatic (type of enzymes and level of activity) and nonenzymatic (milk-based diet, frequency of feeding, bile salt concentrations) conditions of digestion in infants are shown to differ significantly from those in adults. In addition, the interindividual and developmental variability of the digestive conditions in infants is also highlighted.     

Microwave-Assisted Bleaching of Wool Fabrics

Microwave irradiation was used to reduce consumption of energy and time during bleaching of wool fabrics with hydrogen peroxide. The effect of some reaction conditions; viz. hydrogen peroxide concentration, treatment time, presence of stabilizer, on degree of whiteness imparted to bleached wool, was studied systematically. Comparative study between bleaching of wool using microwave irradiation and conventional heating was undergone. The effect of bleaching of wool on its morphological structure was assigned by scanning electron microscopy. The change in some chemical and physicomechanical characteristics of bleached wool was monitored; namely whiteness index, alkali solubility, wettability, critical surface area, tensile strength, and elongation at break, of the treated as well as untreated fabrics were measured. The microwave-assisted bleaching of wool resulted in improved degree of whiteness comparable to that is obtained using conventional heating method. However, the microwave-assisted bleached wool shows lower degree of deterioration than that of conventionally bleached wool. The COD and BOD of the wool bleaching effluents were determined.     

Phosphonium iodine as nickel corrosion inhibitor in 1 M sulfuric acid medium

The inhibiting action of alkyltriphenylphosphonium iodine salt ((C₈H₁₇)Ph₃P⁺,I⁻) towards the corrosion behaviour of nickel in 1 M H₂SO₄ solution has been studied. This compound was found to retard both anodic and cathodic reactions of nickel corrosion. At constant temperature, the corrosion rate decreases with increasing inhibitor concentration. On the other hand, the increase in temperature leads to an increase in the corrosion rate. The activation energy, ΔE _a, were calculated. They were found 19.3 kJ mol⁻¹ and 71.1 kJ mol⁻¹, respectively for the uninhibited solution and in the presence of 10⁻³ M of phosphonium salt. The inhibitor adsorption was identified to occur according to Langmuir isotherm. The equilibrium constant, k, as well as the free energy of adsorption, Δ_ads G°, for inhibitor process were then calculated. Phosphonium iodine exhibited a singular behaviour for T ≥ 318 K where inhibitor desorption increases.     

A PC based computer aided analysis system for the cup drawing process

The paper describes an interactive computer aided analysis system for the simulation of the axisymmetric deep drawing process. The formulation is essentially based on the work of Woo; more emphasis, however, has been placed on the effect of the process and material variables such as the type of press (single-action with air or hydraulic cushions, double-action and hydraulic presses), tooling geometry, anisotropy, etc. The material is assumed to be a rigid, strain hardening, anisotropic solid, and to obey the von Mises yield criterion. The present analysis is based on a membrane formulation, but accounts for the thinning due to bending under tension, in the manner of Swift. The computer program is intended for the tooling and stamping industry. For a given set of process and material variables, the program CUPDRW calculates, at each movement of punch travel, the stresses and strains in each region of the deforming cup. The program also evaluates the inner ram load, the outer ram load, and the total press tonnage. In addition, the program plots the thickness strain and thickness distribution in the final part, and based on these would calculate the part depth. There is nothing new in the formulation, With the exception of modeling the blank holder conditions and the inclusion of thinning due to bending. Inputs to the program are easily executed and the numerical aspects are completely transparent to the user. A typical run using 300 ring elements in 18 steps of calculations would be 2–3 min on the 386-based machines. CUPDRW has proved to be a good production and educational tool. CUPDRW provides the designer with quantitative insight as to the consequence of certain design decisions; such as changes in tool geometry, material properties, and the type of blank holder cycle.     

3D Deformable Super-Resolution for Multi-Camera 3D Face Scanning

Low-cost and high-accuracy 3D face measurement is becoming increasingly important in many computer vision applications including face recognition, facial animation, games, orthodontics and aesthetic surgery. In most cases fringe projection based systems are used to overcome the relatively uniform appearance of skin. These systems employ a structured light camera/projector device and require explicit user cooperation and controlled lighting conditions. In this paper, we propose a 3D acquisition solution with a 3D space-time non-rigid super-resolution capability, using three calibrated cameras coupled with a non calibrated projector device, which is particularly suited to 3D face scanning, i.e. rapid, easily movable and robust to ambient lighting variation. The proposed solution is a hybrid stereovision and phase-shifting approach, using two shifted patterns and a texture image, which not only takes advantage of stereovision and structured light, but also overcomes their weaknesses. The super-resolution scheme involves a shape+texture 3D non-rigid registration for 3D artifacts correction in the presence of small non-rigid deformations as facial expressions.     

Aflatoxin determination in commonly consumed foods in Tunisia

BACKGROUND: To investigate natural aflatoxin occurrence, a total of 180 samples of different foods widely consumed in Tunisia were analysed by an in‐house‐validated high‐performance liquid chromatography method including affinity column clean‐up and post‐column bromination techniques. RESULTS: The method used appeared to be rapid, selective and reproducible, and its performances were established. Detection limits were 0.05 ng g^?1 for aflatoxin B1 and 0.025 ng g^?1 for aflatoxins B2, G1 and G2. Aflatoxins were detected in all investigated commodities except rice, with an overall contamination frequency of 34.4% and concentrations ranging from 0.1 to 40.6 ng g^?1. Aflatoxin B1 was found in all contaminated samples. Sorghum, spices and nuts were most contaminated. CONCLUSION: This study has provided an effective analytical method for the reliable determination of aflatoxins in food samples. Over one‐third of the samples investigated were contaminated with aflatoxins. Sorghum, spices and nuts were most contaminated, whereas rice showed no contamination. Copyright © 2010 Society of Chemical Industry     

Aspergillus section Flavi and aflatoxins in dried figs and nuts in Algeria

The presence of Aspergillus section Flavi and aflatoxin (AF) contamination was investigated in 112 samples of peanuts, almonds and dried figs collected in Algeria. The occurrence of aflatoxin B1 (AFB1), B2 (AFB2), G1 (AFG1) and G2 (AFG2) in different commodities has been determined with a sensitive method based on high performance liquid chromatography (HPLC) coupled with fluorescence detection with post-column photochemical derivatisation. Analytical results indicated that 28 samples of peanuts, 16 samples of almonds and 26 samples of dried figs contained detectable levels of AFs. A total of 69 samples (61.6%) were contaminated with AFB1 ranging from the limit of quantification to 174 µg kg^?1. AFB2 was found in 12 samples (10.7%) and varied from 0.18 to 193 µg kg^?1. Seven samples revealed AF concentrations lower than the limit of quantification. Eleven peanut and fourteen dried fig samples exceeded the European maximum limits for AFB1.