On the drop-weight testing of alumina/aluminum laminated composites

Laminated composites with ceramic front layers and metallic or composite backing layers have gained attractiveness as lightweight armours, as they exhibit the same ballistic performance with lower areal densities as compared to steels. Drop-weight testing (DWT) has potential for evaluating the low velocity impact behaviour of materials. This testing gives significant ideas and information about failure mechanisms and behaviour of materials under low velocity impact. In this study, DWT of alumina/aluminum laminated composites was done in order to investigate the effects of lamination type, density with respect to area and mechanical property of backing material on the low velocity ballistic performance of these composites. The experimental results showed that the laminated composite with ceramic front layer and aged-aluminum alloy as backing layer was the most effective among different investigated specimens against low velocity impact loads.     

Antioxidant and anticholinesterase evaluation of selected Turkish Salvia species

Since Salvia species (Lamiaceae) have been recorded to be used against memory loss in European folk medicine, we herein examined in vitro anticholinesterase and antioxidant activities of 56 extracts prepared with petroleum ether, chloroform, ethyl acetate and methanol obtained from 14 Salvia species (Salvia albimaculata Hedge and Hub, Salvia aucheri Bentham var. canescens Boiss and Heldr, Salvia candidissima Vahl. ssp. occidentalis, Salvia ceratophylla L., Salvia cryptantha Montbret and Bentham, Salvia cyanescens Boiss and Bal., Salvia frigida Boiss, Salvia forskahlei L., Salvia halophilaHedge, Salvia migrostegia Boiss and Bal., Salvia multicaulis Vahl., Salvia sclarea L., Salvia syriaca L., Salvia verticillata L. ssp. amasiaca) growing in Turkey. The antioxidant activities were assessed by both chemical and enzymatic methods against 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging and xanthine/xanthine oxidase (XO) system generated superoxide anion radical inhibition. Anticholinesterase effect of the extracts was tested against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) at concentrations of 0.2 and 1 mg/ml using a microplate-reader assay based on the Ellman method. Most of the extracts did not show any activity against AChE at 0.2 mg/ml, while the chloroform extracts had noticeable inhibition against BChE between 47.7% and 74.7%. The most active extracts at 1 mg/ml for AChE inhibition were observed to be petroleum ether extract of Salvia albimaculata (89.4%) and chloroform extract of Salvia cyanescens (80.2%), whereas ethyl acetate extracts of Salvia frigida and Salvia migrostegia, chloroform extracts of Salvia candidissima ssp. occidentalis and Salvia ceratophylla, as well as petroleum ether extract of Salvia cyanescens were found to inhibit potently BChE (92.2%, 89.6%, 91.1%, 91.3%, and 91.8%, respectively). Particularly, the ethyl acetate and methanol extracts were observed to be highly active against both DPPH and XO. Our data indicates that nonpolar extracts of Salvia species for anticholinesterase activity and the polar extracts for antioxidant activity are worth further phytochemical evaluation for identifying their active components.     

Measurement of wood grain angle, moisture content and density using microwaves

In many wood products manufacturing processes, it is important to ensure that the physical properties of the raw material lie within acceptable ranges and are measured reliably. It is also important for practical use that the measurement process is robust, low-maintenance, fast and preferably non-contacting. This paper describes the development and demonstration of a microwave system for simultaneously identifying wood grain angle, moisture and density. The method involves propagating a microwave beam through the wood and measuring the resulting depolarization, attenuation and phase shift. The wood physical properties can then be identified from these measurements. In a series of measurements, the prototype microwave system successfully identified wood grain angles for hemlock and Douglas fir respectively with standard errors of 0.9° and 2.5° (measured range = -90° to +90°), moisture content 1.2% and 1.9% (measured range = 7–28%), moisture density 3.7 kg/m³ and 7.9 kg/m³ (measured range = 40–150 kg/m³, and dry density 16 kg/m³ and 30 kg/m³ (measured range = 325–625 kg/m³).     

Epicardial fat thickness is associated with impaired coronary flow reserve in hemodialysis patients

Cardiovascular disease (CVD) is the main cause of mortality in hemodialysis (HD) patients. Epicardial fat tissue (EFT) is a new risk factor in CVD. The aim of this study was to evaluate the association between EFT and coronary artery flow reserve (CFR), which is an early indicator of endothelial dysfunction in coronary vessels of HD patients. We performed a cross‐sectional study including 71 chronic HD patients and 65 age‐ and sex‐matched healthy controls. Epicardial fat tissue was significantly higher in HD patients when compared to healthy controls (6.53 ± 1.01 mm vs. 5.79 ± 1.06 mm, respectively, P < 0.001). On transthoracic Doppler echocardiography, CFR values were significantly lower in HD patients when compared to healthy controls (1.73 ± 0.11 vs. 2.32 ± 0.28, P < 0.001). Correlation analysis showed CFR values to be inversely correlated with EFT (r = ?0.287, P < 0.05). Multiple linear regression analysis was used to define independent determinants of EFT in HD patients. Artery flow reserve, age, body mass index and total cholesterol levels were independently correlated with EFT thickness. This study demonstrated that EFT was significantly higher among HD patients compared to healthy controls. In addition, this study was the first to demonstrate an inverse correlation between EFT and CFR in this patient population.     

Effect of Solution Treatment on Thermal Conductivity of Porous NiTi Shape Memory Alloy

In this study, a new solution treatment “solution treatment under loading” was applied to a porous Ni–50 at.%Ti shape memory alloy (SMA), which was fabricated by self-propagating high-temperature synthesis (SHS), to explore the microstructural improvement regarding single-phase NiTi. The effects of solution treatment under loading and without loading on the phase constituent and thermal conductivity were investigated and discussed. The phase constituent and thermal conductivity of the specimens considerably changed with solution treatment under loading, but they were not affected significantly with solution treatment without loading. Intermetallic phases such as B19′(NiTi), Ti₂Ni, and Ni₄Ti₃ disappeared, the density of the B2(NiTi) phase increased with solution treatment under loading, and thus the thermal conductivity was increased. It was also seen that the thermal conductivity of porous NiTi was less than that of solid NiTi.     

Energy use and economical analysis of sugar beet production in Tokat province of Turkey

The purposes of this study were to determine energy consumption of input and output used in sugar beet production, and to make a cost analysis in Tokat, Turkey. Data were collected from 146 sugar beet farms in Tokat, Turkey by using a face-to-face questionnaire performed in January and February 2005. Farms were selected based on random sampling method. The results revealed that total energy consumption in sugar beet production was 39 685.51 MJ ha⁻¹, and accounted for 49.33% of fertilizer energy, and 24.16% of diesel energy. The output/input energy ratio was 25.75 and energy productivity was 1.53 kg MJ ha⁻¹. Results further indicated that 82.43% of total energy input was in non-renewable energy form, and only 12.82% was in renewable form. Economic analyses showed that profit–cost ratio of farms was 1.17. The highest energy cost items were labor, land renting, depreciation and fertilizers. Although intensive energy consumption in sugar beet production increased the yield, it also resulted in problems such as global warming, land degradation, nutrient loading and pesticide pollution. Therefore, there is a need to pursue a new policy to force producers to undertake energy-efficient practices to establish sustainable production systems without disrupting the natural resources. In addition, extension activities are needed to improve the efficiency of energy consumption and to sustain the natural resources.     

The effect of different formulations on physical properties of cakes baked with microwave and near infrared-microwave combinations.

The aim of this study was to determine the effect of different formulations on color and textural characteristics of different cakes during baking in microwave and near infrared-microwave combination ovens. For comparison, cakes were also baked in conventional ovens. Color and hardness for both types of baking schemes were found to be dependent on formulation. Cakes containing Simplesse, a fat replacer consisting mostly of whey protein, baked in microwave and near infrared-microwave combination ovens were found to be the firmest cakes.     

Intraoperative and postoperative use of mitomycin-C in the treatment of primary pterygium

OBJECTIVE: This study was conducted to determine the reliability of detecting features and making diagnoses of lower respiratory infections from chest radiograms in young infants. METHODS: Forty chest radiograms of infants younger than 6 months of age admitted with lower respiratory tract infection to a tertiary care pediatric hospital were independently reviewed on two separate occasions by three pediatric radiologists blinded to the patients' clinical diagnoses. For each radiograph the radiologists noted whether a feature was present, absent or equivocal on a standardized form. The features examined were hyperinflation, peribronchial thickening, perihilar linear opacities, atelectasis and consolidation. On the same form each radiologist indicated whether the radiograph was normal or showed airways and/or airspace disease. Within and between observer agreement were calculated by the average weighted kappa statistic. RESULTS: Within observer agreement for the radiologic features of hyperinflation, peribronchial wall thickening, perihilar linear opacities, atelectasis and consolidation were 0.85, 0.76, 0.87, 0.86 and 0.91, respectively. The between observer kappa results for these features were 0.83, 0.55, 0.82, 0.78 and 0.79, respectively. The within and between observer kappa statistics for interpretation of the radiographic features were best for airspace disease (within, 0.92; between, 0.91), and lower for normal (within, 0.80; between, 0.66) radiogram and for airways disease (within, 0.68; between, 0.48). The presence of consolidation was highly correlated with a diagnosis of airspace disease by all three radiologists. CONCLUSIONS: Clinicians basing the diagnosis of lower respiratory infections in young infants on radiographic diagnosis should be aware that there is variation in intraobserver and interobserver agreement among radiologists on the radiographic features used for diagnosis. There is also variation in how specific radiologic features are used in interpreting the radiogram. However, the cardial finding of consolidation for the diagnosis of pneumonia appears to be highly reliable.     

Measurement of junction temperature of an AlGaAs/GaAsheterojunction bipolar transistor operating at large powerdensities

An electrical method to determine the junction temperature of a power bipolar transistor is presented. The success of this method does not rely on the constancy of thermal resistance over the wide range of operating temperatures. It is hence suitable for transistors operating at high power densities where conventional measurement techniques would not apply. Using this method, we establish that the junction temperature can be 40°C higher than the product of the low temperature thermal resistance and the power dissipation     

Measurements of the total molecular differential attenuation coefficients of some compounds for scattering of γ-rays

The differential attenuation coefficients for total scattering have been measured using the Si(Li) detector at photon excitation energy of 59.5 keV for Fe₂O₃, Y₂O₃, Nb₂O₅, SeO₂, Sb₂O₅ and BaO compounds at seven angles ranging from 60° to 120° at intervals of 10°. The obtained results have been compared with relativistic and non-relativistic theoretical values.