An assessment of total RMR classification system using unified simulation model based on artificial neural networks

Engineering design has great importance in the cost and safety of engineering structures. Rock mass rating (RMR) system has become a reliable and widespread pre-design system for its ease of use and variety in engineering applications such as tunnels, foundations, and slopes. In RMR system, six parameters are employed in classifying a rock mass: uniaxial compressive strength of intact rock material (UCS), rock quality designation (RQD), spacing of discontinuities (SD), condition of discontinuities (CD), condition of groundwater (CG), and orientation of discontinuities (OD). The ratings of the first three parameters UCS, RQD, and SD are determined via graphic readings where the last three parameters CD, CG, and OD are estimated by the tables that are composed of interval valued linguistic expressions. Because of these linguistic expresions, the estimated rating values of the last three become fuzzy especially when the related conditions are close to border of any two classes. In such cases, these fuzzy situations could lead up incorrect rock class estimations. In this study, an empirical database based on the linguistic expressions for CD, CG, and OD is developed for training Artificial Neural Network (ANN) classifiers. The results obtained from graphical readings and ANN classifiers are unified in a simulation model (USM). The data obtained from five different tunnels, which were excavated for derivation purpose, are used to evaluate classification results of conventional method and proposed model. Finally, it is noted that more accurate and realistic ratings are reached by means of proposed model.     

Pitch angle control in wind turbines above the rated wind speed by multi-layer perceptron and radial basis function neural networks

In wind energy conversion systems, one of the operational problems is the changeability and discontinuity of wind. In most cases, wind speed can fluctuate rapidly. Hence, quality of produced energy becomes an important problem in wind energy conversion plants. Several control techniques have been applied to improve the quality of power generated from wind turbines. Pitch control is the most efficient and popular power control method, especially for variable-speed wind turbines. It is a useful method for power regulation above the rated wind speed. This paper proposes an artificial neural network-based pitch angle controller for wind turbines. In the simulations, a variable-speed wind turbine is modeled, and its operation is observed by using two types of artificial neural network controllers. These are multi-layer perceptrons with back propagation learning algorithm and radial basis function network. It is shown that the power output was successfully regulated during high wind speed, and as a result overloading or outage of the wind turbine was prevented.     

Contribution of laser microdissection-based technology to proteomic analysis in hepatocellular carcinoma developing on cirrhosis

Hepatocellular carcinoma (HCC) is a major cause of cancer worldwide. Proteomic studies provide opportunities to uncover targets for the diagnosis and treatment of this disease. However, in HCC developing in a setting of cirrhosis, the detection of proteome alterations may be hampered by the increased cellular heterogeneity of tissue when analysing global liver homogenates. The aim of this study was to evaluate whether the identification of proteome alterations in these HCC cases was improved when the differential protein profile between tumour and non-tumour areas of liver was determined using hepatocytes isolated by laser microdissection (LM). Differential profiles established with LM-hepatocytes and liver section homogenates using 2-DE and MS exhibited noticeable differences: 30% of the protein spots with deregulated expression in tumorous LM-samples did not display any modification in homogenates; conversely 15% of proteins altered in tumorous homogenates were not impaired in LM-hepatocytes. These alterations resulted from the presence in cirrhotic liver of fibrotic stroma which displayed a protein pattern different from that determined in LM-hepatocytes. In conclusion, our data demonstrate the interest of LM in distinguishing between fibrotic and hepatocyte proteome alterations and thus the benefit of LM to proteome studies of HCC developing in a context of cirrhosis.     

Pan Evaporation Modeling Using Neural Computing Approach for Different Climatic Zones

The purpose of this study was to develop and apply the neural networks models to estimate daily pan evaporation (PE) for different climatic zones such as temperate and arid climatic zones, Republic of Korea and Iran. Three kinds of the neural networks models, namely multilayer perceptron-neural networks model (MLP-NNM), generalized regression neural networks model (GRNNM), and support vector machine-neural networks model (SVM-NNM), were used to estimate daily PE. The available climatic variables, consisted of mean air temperature (T_mean), mean wind speed (U_mean), sunshine duration (SD), mean relative humidity (RH_mean), and extraterrestrial radiation (R_a) were used to estimate daily PE using the various input combinations of climate variables. The measurements for the period of January 1985?CDecember 1990 (Republic of Korea) and January 2002?CDecember 2008 (Iran) were used for training and testing the employed neural networks models. The results obtained by SVM-NNM indicated that it performs better than MLP-NNM and GRNNM for estimating daily PE. A comparison was also made among the employed models, which demonstrated the superiority of MLP-NNM, GRNNM, and SVM-NNM over Linacre model and multiple linear regression model (MLRM).     

Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters

Medium carbon steel (AISI 1040) was one of the candidate materials for rock bolts to reinforce the borehole liners and emplacement drifts of the high-level nuclear waste repository in Yucca Mountain. The corrosion performance of this structural steel was investigated by techniques such as linear polarization, electrochemical impedance spectroscopy (EIS), and laboratory immersion tests in simulated ground waters. The corrosion rates of the steel were measured for the temperatures in the range from 25 °C to 85 °C, for the ionic concentrations of 1 time (1×), 10 times (10×), and a hundred times (100×) ground water concentration. The steel corroded uniformly at penetration rates of 35 to 200 μm/year in the deaerated waters, and at 200 to 1000 μm/year in the aerated waters. Increasing temperatures in the deaerated waters increased the corrosion rate of the steel. However, increasing ionic concentrations influenced the corrosion rate only slightly. In the aerated 1×and 10×waters, increasing temperatures increased the rates of the steel significantly. In the aerated 100×waters, the corrosion rate increased from 25 °C to 45 °C and decreased at higher temperatures (65 °C and up) due to the formation of oxide/hydroxide films and salt scales on the surface of the steel specimen. The steel suffered pitting corrosion in the both deaerated and aerated hot ground water environments after anodic polarization. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the. TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

Characterisation of yoghurt enriched with polyunsaturated fatty acids by using walnut slurry

This study aimed to evaluate the physicochemical, chemical, rheological, sensorial and microbiological properties of yoghurt enriched with polyunsaturated fatty acids (PUFAs). The PUFA‐enriched yoghurt was prepared with walnut slurry (10%?50%) and skimmed milk (50%?90%). Compared with the control yoghurt, it contained a lower content of protein, potassium, sodium and phosphorus, and a higher content of fat, iron, magnesium and zinc. Moreover, it exhibited a lower syneresis value and a higher water‐holding capacity value. Its fat was rich in omega fatty acids, mainly linoleic and linolenic acids. These research findings revealed that walnut slurry could be used in yoghurt manufacture to develop fermented milk products as functional foods, especially when enriched with omega fatty acids.     

Carbon Bonding State Has a Small Effect on Melting of Direct-Reduced Iron

Metallurgical and Materials Transactions B - The concentration and chemical bonding state of carbon in direct-reduced iron (DRI) might affect DRI melting temperature and rate. The effects of carbon...     

On Security and Reliability Using Cooperative Transmissions in Sensor Networks

Cooperative transmissions have received recent attention and research papers have demonstrated their benefits for wireless networks. Such benefits include improving the reliability of links through diversity and/or increasing the reach of a link compared to a single transmitter transmitting to a single receiver (single-input single-output or SISO). In one form of cooperative transmissions, multiple nodes can act as virtual antenna elements and provide diversity gain or range improvement using space-time coding. In a multi-hop ad hoc or sensor network, a source node can make use of its neighbors as relays with itself to reach an intermediate node with greater reliability or at a larger distance than otherwise possible. The intermediate node will use its neighbors in a similar manner and this process continues till the destination is reached. Thus, for the same reliability of a link as SISO, the number of hops between a source and destination may be reduced using cooperative transmissions as each hop spans a larger distance. However, the presence of malicious or compromised nodes in the network impacts the benefits obtained with cooperative transmissions. Using more relays can increase the reach of a link, but if one or more relays are malicious, the transmission may fail. However, the relationships between the number of relays, the number of hops, and success probabilities are not trivial to determine. In this paper, we analyze this problem to understand the conditions under which cooperative transmissions fare better or worse than SISO transmissions. We take into consideration additional parameters such as the path-loss exponent and provide a framework that allows us to evaluate the conditions when cooperative transmissions are better than SISO transmissions. This analysis provides insights that can be employed before resorting to simulations or experimentation.     

Layered precursors for new zeolitic materials: Synthesis and characterization of B-RUB-39 and its condensation product B-RUB-41

Condensation of layered silicate precursors leads to new, all silica zeolite frameworks. In order to introduce catalytic functionality, boron has been substituted into the silicate layer of RUB-39 in a single step synthesis process. Condensation of the silicate layer to the zeolite framework of RUB-41, RRO framework structure type, preserved B as constituent of the material. Analysis of structural details obtained from Rietveld analysis of powder diffraction data, ¹¹B and ²⁹Si NMR experiments of the as synthesized precursor as well as of the zeolite condensation product, and crystal chemical reasoning indicates segregation of B on one specific T-site. This T-site is buried in the silicate anionic layer of the precursor shielding the additional negative charge introduced by the trivalent T-atom.