Effect of ultrasound on separation selectivity and efficiency of flotation

The effect of the use of ultrasound in the froth phase on the flotation performance has been investigated in relation to the flotation rate of a complex sulphide ore. A series of kinetic flotation tests with and without ultrasound were conducted in a flotation machine with a 2-L cell, in which an ultrasonic probe is located in the froth zone. The results indicate that there is a considerable effect of ultrasound on separation selectivity and efficiency in the flotation of a complex sulphide ore at intermediate and high level airflow rates whereas, no significant differences in the separation performance were obtained from the flotation with and without ultrasound at low airflow rates. In addition, the results of the size-by-size analysis show that a much better cleaning action in the froth was promoted for coarse particles rather than fine particles as a result of the use of ultrasound. As a result of increase in the bubble coalescence, it was found that the use of ultrasound in the froth is more effective at shallow froths. Therefore, either effective pulp volume can be increased with a negligible loss of flotation performance or the pulp density can be decreased to obtain better product quality with the use of ultrasound in shallow froths.     

Emergence of genomic self-similarity in location independent representations

A key property for predicting the effectiveness of stochastic search techniques, including evolutionary algorithms, is the existence of a positive correlation between the form and the quality of candidate solutions. In this paper we show that when the ordering of genomic symbols in a genetic algorithm is completely independent of the fitness function and therefore free to evolve along with the candidate solutions it encodes, the resulting genomes self-organize into self-similar structures that favor this key stochastic search property.     

Effects of Supercritical Fluid Extraction Parameters on Unsaturated Fatty Acid Yields of Pistacia terebinthus Berries

Utilization of renewable resources and development of new processes aimed at converting these materials into value added bio-products are gaining more emphasis. The scope of this study was to optimize supercritical CO₂ extraction (SFE) parameters such as pressure, temperature and flow rate for the yields of unsaturated fatty acids from Pistacia terebinthus berries by a Box-Behnken statistical design. All samples were analyzed for fatty acids by GC-FID. The most effective variables were pressure (P < 0.005) and flow rate (P ≤ 0.005). Maximizing the evaluative criteria for dependent variables (oleic acid, linoleic acid and linolenic acid), optimal conditions were determined to be 240 bar, 60 °C and a flow rate of 16 g/min yielding 51.2% oleic acid, 26.5% linoleic acid and 1.0% linolenic acid. The amounts of unsaturated fatty acids in SFE samples (81.3%) were higher than the hexane (74.3%) and were similar to that of cold press samples (80.1%). High concentrations of unsaturated fatty acids can indicate the utilization of the berries as a major dietary source and demonstrate challenges for industrial application of SFE as a green technology.     

Signal level performance variation of radio frequency identification tags used in cow body

Ruminant diseases are strictly connected to pH and temperature values of the rumen. Therefore, the attenuation to dynamic measurement and tracking of both pH and temperature values through animal rumen has grown rapidly for decades. Reading performance of RFID tags depends on signal quality and signal level, and this can be understood by means of wave attenuation through tissue. In this article, attenuation through cow body is investigated for improving reading performance and battery life. Number of receiving antennas will be used in the system, their location and heights are critical for this aim. Signals from different points of animals' body are measured and compared with the signals spread just out of RFID tags. Equivalent dielectric constants of tissue between RFID tag and receiving antenna is modeled by using literature data, and finally simulation and analytical results are verified by measurement results. Measured value of attenuation through the cow body is varying between 25 dB and 87 dB for RFID tags operating at 434 MHz. Within the 30 m radius, the strongest signal is obtained at 50 cm height and taken from the left side of the animal body, which is offered as optimum communication position.     

Safety of the Las Vegas left-turn display

This paper provides a safety evaluation of a special protected/permitted left turn signal control (Las Vegas LT Display) that has been implemented in the urbanized area of Las Vegas, Nevada. The Las Vegas LT Display eliminates the yellow trap condition for leading approach in lead/lag operation. It provides protected only left turns during certain times of day by suppressing the permitted green ball and yellow ball displays. Before and after studies were conducted using the crash data from 10 intersections. Results from the analyses indicated that no obvious safety concerns due to use of the special display.     

The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel

TiBN coatings have high hardness and high adhesion. Due to these excellent properties there has been increasing interest in TiBN coatings. In this study, TiBN coatings were deposited on AISI D2 cold work tool steel and silicon wafers by closed field unbalanced magnetron sputtering (CFUBMS). The structural, mechanical and adhesion properties of these coatings were analysed by X-ray diffraction, scanning electron microscopy, microhardness test, indentation test and scratch tests. TiBN coatings produced by magnetron sputtering exhibited a dense and columnar structure. These results indicate that TiB₂, TiN and h-BN exist in crystalline forms at all coatings. The highest hardness was obtained at the lowest nitrogen flow rate. Very few cracks were observed at the edge of the indentation marks at the highest nitrogen flow rate. The highest critical load obtained with scratch test was identified as 102?N.     

A numerical scheme for two-dimensional optimal control problems with memory effect

A new formulation for multi-dimensional fractional optimal control problems is presented in this article. The fractional derivatives which are coming from the formulation of the problem are defined in the Riemann–Liouville sense. Some terminal conditions are imposed on the state and control variables whose dimensions need not be the same. A numerical scheme is described by using the Grünwald–Letnikov definition to approximate the Riemann–Liouville Fractional Derivatives. The set of fractional differential equations, which are obtained after the discretization of the time domain, are solved within the Grünwald–Letnikov approximation to obtain the state and the control variable numerically. A two-dimensional fractional optimal control problem is studied as an example to demonstrate the performance of the scheme.     

Polyindene/organo‐montmorillonite conducting nanocomposites. I. Synthesis,characterization, and electrokinetic properties

In this study, Na‐montmorillonite was organically modified with cetyltrimethylammoniumbromide (CTAB) and intercalated with in‐situ polymerized indene. Polyindene(PIn)/Organo‐MMT nanocomposites were obtained with three different compositions and coded as: K1: [PIn(94.5%)/O‐MMT(5.5%)], K2: [PIn(92.8%)/O‐MMT(7.2%)], and K3: [PIn(87.9%)/O‐MMT(12.1%)]. These nanocomposites were subjected to full characterization with various techniques. Electrokinetic studies were conducted to reveal the zeta (ζ)‐potential characteristics of the nanocomposites. ζ‐potentials of the materials were observed to decrease with increasing O‐MMT content. The cationic (CTAB) and anionic (sodium dodecylsulfate) surfactants were shifted the ζ‐potentials of the colloidal dispersions to more positive and more negative regions, respectively whereas nonionic surfactant (Triton X‐100) caused almost no change. The pH and temperature were observed to shift the ζ‐potential values of the nanocomposites to more negative and slightly more positive regions, respectively. With the addition of mono (NaCl), di (BaCl₂) and three (AlCl₃) valent salts, the ζ‐potential of the nanocomposites were shifted to more negative, more positive, and much more positive regions, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Overall equipment effectiveness when production speeds and stoppage durations are uncertain

Evaluation of manufacturing equipment performance has been very important in production-related functions such as planning, scheduling, and maintenance. Nevertheless, low accuracy of performance measurements can mislead decision makers. In this study, overall equipment effectiveness (OEE) is considered as a performance indicator of manufacturing equipment. In practice, components of OEE may consist of uncertainty due to manual or semi-automatic measurement systems. As a consequence, true performance of equipment may be masked by the uncertainty of measurements. In this study, two types of uncertainty are considered in production speed and stoppage duration measurements, which are used in calculating OEE components. When the measurements have uncertainty due to use of linguistic terms or some minor stoppages, idling, or speed losses being ignored, fuzzy arithmetic is used as a method to handle uncertainty. In some low accuracy cases, best guess interval estimates of operators may better reflect the state than just providing a point estimate. For such cases, interval arithmetic is used as a method to handle uncertainty. Implementation of the methods are illustrated using two real-world examples and a software is provided for practitioners. Proposed methods help making better informed decisions using OEE under measurement uncertainty of production speed and stoppage durations.