Effects of different polymerization protocols on the degree of conversion of two dual‐cured core buildup composites polymerized by light‐emitting diode and halogen light‐curing units

The aim of study was to investigate the effects of various curing protocols with quartz–tungsten halogen (QTH) or light‐emitting diode (LED) light‐curing units on the degree of conversion (% DC) of two dual‐cured core buildup resin composites. Two dual‐cured core buildup resin composites, Clearfil Dc Core Automix (CLF) and Grandio Core Dc (GR), were selected. Specimens were exposed to the polymerization protocols as follows: there was immediate photoactivation or photoactivation delayed by 2 or 5 min by a QTH or LED source, and one group was allowed to chemically polymerize and served as a control (n = 6). The % DC of the specimens was determined with attenuated total reflectance–Fourier transform infrared spectroscopy. The GR samples polymerized with QTH for the 5‐min‐delayed photoactivation had higher % DC values than those self‐cured, and the Clearfil Dc Core Automix (CLF) samples with immediate or delayed curing protocols with halogen yielded higher % DC values than the samples that were chemically polymerized. The comparison of the two resin composites polymerized with halogen showed a higher % DC for CLF than for GR in the 2‐min‐delayed photoactivation. On the other hand, when they were cured with LED, the % DC values of GR significantly increased after the 2‐min‐delayed photoactivation. In light of the results, it might be stated that CLF polymerized with QTH, could be the better option. GR provided adequate chemical polymerization; therefore, it might be useful in areas in which light curing is not possible. Clinicians should consider the polymerization characteristics of dual‐cured resin composites. The use of different composites may require the modification of the application procedures recommended by the manufacturer. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40560.     

Preconditioning of AISI 304 stainless steel surfaces in the presence of flavins—Part I: Effect on surface chemistry and corrosion behavior

Stainless steel AISI 304 surfaces were studied after a mild anodic polarization for oxide growth in the presence and absence of two derivatives of vitamin B2 (riboflavin and flavin mononucleotide) that can be secreted by metal-reducing bacteria and act as a chelating agent for iron species. The alterations in oxide chemistry were studied by means of surface-sensitive techniques such as X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry analysis. The complementary electrochemical characterization revealed a preferential growth of an oxide/hydroxide iron-rich film that is responsible for an altered pit initiation and nucleation behavior. These findings suggest that as the corrosion behavior is determined by the interplay of the chemical and electronic properties, only a mild anodic polarization in the presence of redox-active molecules is able to alter the chemical and electronic structure of the passive film formed on stainless steel AISI 304. This helps to achieve a profound understanding of the mechanisms of microbially influenced corrosion (MIC) and especially the possible effects of the redox-active biomolecules, as they may play an important role in the corrosion susceptibility of stainless steel surfaces.     

A study on swelling behavior of poly(p‐chloro styrene) networks in some aromatic hydrocarbons and linear poly(p‐chloro styrene) solutions

Crosslinked networks (NPPCS) and linear polymers (LPPCS) of poly (p‐chloro styrene) were synthesized by free‐radical polymerization of p‐chloro styrene. NPPCS networks were swollen in four different molecular weights of LPPCS solutions in toluene at three different concentrations. The equilibrium swelling results were evaluated by means of Flory‐Rehner theory to obtain network–linear polymer interaction parameter, χ′₂₃ between NPPCS and LPPCS. It was concluded that the parameter χ′₂₃ decreased with molecular weight but increased with concentration of LPPCS in outer solution. The solvent independent interaction parameter between NPPCS and PPCS was estimated as 0.7 by extrapolation of the values of χ′₂₃ to zero value of the fraction ratio of solvent to linear polymer, ν₁/ν₃ inside the network. As well as, the binary interaction parameters, χ₁₂ of NPPCS with benzene, ethyl benzene, n‐propyl benzene and isopropyl benzene were obtained by means of Flory‐Rehner theory at temperatures between 25 and 55°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Prediction of earthquake damage to urban water distribution systems: a case study for Denizli,Turkey

Prediction of damage to water supply lines during an earthquake is a critical part of seismic planning. This study evaluates the performance of the water supply system in Denizli, Turkey, in the event of an M6, M6.3, M6.5 and M7 earthquake associated with the Pamukkale and Karakova-Akhan Faults. The relative effects of transient ground deformations and permanent ground deformations based on maps of liquefiable soil and zones of predicted lateral ground displacements are compared. The relative effects of the different magnitude earthquakes and pipeline damage relationships on the pipeline performance following a seismic event are assessed.     

Person?×?Situation interactionism in self-encoding (Iam…when…): Implications for affect regulation and social information processing.

Although Person?×?Situation (P?×?S) interactionism is central in current social-cognitive conceptions of personality organization, its implications for the encoding of the self remain unexplored. Two studies examined the causal role of P?×?S interactionism in self-encoding on affect regulation and discriminative social perception. Following failure (Studies 1 and 2) and success (Study 2) ideation, participants were prompted to encode the self either in P?×?S interactionist terms (I am…when…) or in traitlike unconditional terms (I am…). Interactionist (compared with unconditional) self-encoding led to less affective extremity, suggesting that such encoding may prevent individuals from generalizing specific success and failure experiences to the self as a whole. Study 2 also found that interactionist self-encoding attenuated the endorsement of global stereotypes, suggesting that such encoding may enhance fine-grained social perception as well. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A cross-layer fault tolerance management module for wireless sensor networks

It is a well-established fact that wireless sensor networks (WSNs) are very power constraint networks, but besides this, they are inherently more fault-prone than any other type of wireless network and their protocol design is very application specific. Major reasons for the faults are the unpredictable wireless communication channel, battery depletion, as well as fragility and mobility of the nodes. Furthermore, as traditional protocol design methods have proved inadequate, the cross-layer design (CLD) approach, which allows for interactions between different layers, providing more flexible and energy-efficient functionality, has emerged as a viable solution for WSNs. In this study we define a fault tolerance management module suitable to the requirements, limitations, and specifics of WSNs, encompassing methods for fault detection, fault prevention, fault management, and recovery. The suggested solution is in line with the CLD approach, which is an important factor in increasing the network performance. Through simulations the functionality of the network is evaluated, based on packet loss, delay, and energy consumption, and is compared with a similar solution not including fault management. The results achieved support the idea that the introduction of a unified approach to fault management improves the network performance as a whole.     

Comparison of acid and enzymatic hydrolysis of tobacco stalk xylan for preparation of xylooligosaccharides

Tobacco stalk (TS), a major agricultural waste in the Black Sea region of Turkey, was used for the production of xylooligosaccharides (XOs). It contains about 22 g/100 g xylan whose composition was determined as 93.5 g/100 g xylose, 6.54 g/100 g glucose and 11.2 g/100 g uronic acid after complete acid hydrolysis. XO production was performed by enzymatic and acid hydrolysis of xylan which was obtained by alkali extraction from tobacco stalk. In enzyme hydrolysis, xylan was hydrolyzed using a xylanase preparation and the effects of pH, temperature, hydrolysis period, substrate and enzyme concentrations on the xylooligosaccharide yield and degree of polymerization were investigated. For enzymatic hydrolysis under optimum conditions XO yield with respect to tobacco stalk xylan (TSX) was 8.2 g/100 g after 8 h and 11.4 g/100 g after 24 h reaction period. In the acid hydrolysis, sulfuric acid was used and the hydrolyzate contained different amount of oligosaccharides and monosaccharides. For acid hydrolysis under optimum conditions, XO yield with respect to TSX was 13.0 g/100 g. Enzymatically obtained oligosaccharides were purified via ultrafiltration by using 10 and 3 kDa membranes. After a two-step membrane processing, the permeate containing mostly oligosaccharides was obtained.     

A comparative analysis of the effects of computer and paper-based personalization on student achievement

The aim of this study is to investigate whether personalization of mathematical word problems affects student achievement; and if it does, to find out whether the outcomes vary depending on computer and class environment in the teaching of mathematics. The sample of the research, conducted in the 2006–2007 fall semester, consists of 90 seventh grade in four sub-groups. During the application in the classroom, paper-based personalized and paper-based non-personalized problems were given. As to the computer environment, web-based personalized and web-based non-personalized problems were presented. After the application, an achievement test was performed as an achievement post-test parallel to the pre-test. The results show no significant difference between the scores of the groups who used personalized materials and the groups who used non-personalized materials. The results also indicate that no significant difference exists between those who studied in the computer-based environment and those in the paper-based environment.     

Polyphenol oxidase properties,anti-urease,and anti-acetylcholinesterase activity of Diospyros lotus L. (Plum Persimmon)

Diospyros lotus fruit polyphenol oxidase was purified using affinity chromatography, resulting in a 15-fold enrichment in specific activity. The purified enzyme, having 16.5 kDa molecular weight on sodium dodecyl sulfate-polyacrylamide gel electrophoresis, exhibited the highest activity toward 4-methylcatechol. Maximum diphenolase activity was reached at pH 7.0 and 60°C in the presence of 4-methylcatechol. K_m and V_max values were calculated as 3.8 mM and 1250 U/mg protein, respectively. Ascorbic acid was a promising inhibitor with an IC₅₀ value of 0.121 µM. The activity of the purified enzyme was stimulated by Fe²⁺, Sr²⁺, Zn²⁺, and K⁺ and deeply inhibited by Hg²⁺, at 1 mM final concentration. Aqueous extract of Diospyros lotus L. fruit showed strong substantial urease and acetylcholinesterase inhibition, with IC₅₀ values of 1.55 ± 0.05 and 16.75 ± 0.11 mg/mL, respectively.     

The importance of economies of scale,transport costs and demand patterns in optimising hydrogen fuelling infrastructure: An exploration with SHIPMod (Spatial hydrogen infrastructure planning model)

Hydrogen is widely recognised as an important option for future road transportation, but a widespread infrastructure must be developed if the potential for hydrogen is to be achieved. This paper and related appendices which can be downloaded as Supplementary material present a mixed-integer linear programming model (called SHIPMod) that optimises a hydrogen supply chains for scenarios of hydrogen fuel demand in the UK, including the spatial arrangement of carbon capture and storage infrastructure. In addition to presenting a number of improvements on past practice in the literature, the paper focuses attention on the importance of assumptions regarding hydrogen demand. The paper draws on socio-economic data to develop a spatially detailed scenario of possible hydrogen demand. The paper then shows that assumptions about the level and spatial dispersion of hydrogen demand have a significant impact on costs and on the choice of hydrogen production technologies and distribution mechanisms.