Effects of Fining Agents on Antioxidant Capacity of Red Wines

The antioxidant capacity of wine depends not only on the grape variety but also on the wine processing steps. The aim of this study was to determine the effects of different fining agents, used at different concentrations, on the antioxidant status of fined wines. The results demonstrated that the use of a combination of gelatin and Kieselsol led to the highest total phenol value (3,491 mg/L GAE) and antioxidant activities (29%) among the tested fining agents. Wines were mostly negatively affected by the use of egg white as an agent and led to the lowest value of total phenol (3,038 mg/L GAE) and the lowest rate of antioxidant activity (26%). Significant differences (p<0.05) were determined between gelatin, egg white, and the control groups. The results of the grouping of analyzed parameters in n‐dimensional space, with different fining agents at different concentrations, demonstrated the importance of a low concentration of fining agents for high antioxidant activity and total phenols.     

New perylene derivative dyes for dye-sensitized solar cells

We have studied the influence of the spacer alkyl chain length of perylenemonoimide (PMI) dyes on the device performance in dye-sensitized solar cells (DSSCs). We observed that the dyes with longer and brunched alkyl chains exhibit higher efficiencies in DSSCs. In line with these statements we now report the highest efficiency obtained under standard conditions for a perylene imide derivative with PMI-DA1 that performs 300 mV open circuit voltage, 9.79 mA/cm² short-circuit current and 1.61% overall conversion efficiency.     

On the drop-weight testing of alumina/aluminum laminated composites

Laminated composites with ceramic front layers and metallic or composite backing layers have gained attractiveness as lightweight armours, as they exhibit the same ballistic performance with lower areal densities as compared to steels. Drop-weight testing (DWT) has potential for evaluating the low velocity impact behaviour of materials. This testing gives significant ideas and information about failure mechanisms and behaviour of materials under low velocity impact. In this study, DWT of alumina/aluminum laminated composites was done in order to investigate the effects of lamination type, density with respect to area and mechanical property of backing material on the low velocity ballistic performance of these composites. The experimental results showed that the laminated composite with ceramic front layer and aged-aluminum alloy as backing layer was the most effective among different investigated specimens against low velocity impact loads.     

Rosai-Dorfman disease involving the nasal septum

Rosai-Dorfman disease, or sinus histiocytosis with massive lymphadenopathy (SHML), is a benign, self-limited pseudolymphomatous entity with characteristic histologic features. The disease may be atypically present in the absence of detectable nodal involvement. This is a case of nasal septum involvement of Rosai-Dorfman disease without clinically apparent lymphadenopathy.     

Synthesis and characterization of uv-curable acrylated urethane prepolymers,I. Effects of reactive diluents and relative humidity on physical properties

A UV-curable acrylated urethane prepolymer was synthesized from tolylene-2,4-diisocyanate (TDI), a polyether polyol (Arcol 1131) and endcapped with 2-hydroxyethyl methacrylate (HEMA) by addition reaction in the presence of dibutyltin dilaurate as catalyst. UV curing was performed with either diethylene glycol diacrylate or thiodiethylene glycol diacrylate as reactive diluent. The effects of reactive diluent types, their concentrations and the humidity of environment on mechanical properties of cured films were investigated. Changes in the tensile strength, elongation and Young's modulus values of the cured films upon addition of reactive diluents with different concentrations were related to the effect of the diluent on the crosslinking density of cured films. The increase of relative humidity from 50 to 95% caused a decrease of tensile strength and Young's modulus values of cured films. It is proposed that the decrease of these physical properties in high relative humidity is due to the formation of hydrogen bonding in polymer chains caused by water molecules.     

Effect of carrier type on coupled transport kinetics of thiocyanate ions through liquid membranes

Coupled transport of thiocyanate ions through a liquid membrane containing quaternary ammonium chloride salts in chloroform was examined. The influences of the carrier type in the membrane phase on the coupled transport of thiocyanate ions were investigated. The kinetics of the coupled transport were analyzed in the formalism of two consecutive irreversible first-order reactions and the kinetic parameters (k_1d, k_2m, k_2a, R_m^max, t_max, J_d^max, J_amax) were also calculated. For the coupled transport of thiocyanate ions, quaternary ammonium chloride salts having different carbon atom numbers (C_n) used as carriers were found to increase thiocyanate ions transport efficiency with increasing carbon atom numbers. Tetradecyl trimethylammonium chloride (TDTMACl), hexadecyl trimethylammonium chloride (HDTMACl), and tetraoctyl ammonium chloride (TOACl) were found to be the most effective carrier types for transport of thiocyanate ions when C_n is greater than 16. The activation energies for maximum membrane entrance and exit fluxes were calculated as 32.45 kJ/mol and 34.75 kJ/mol, respectively. The values of the activation energy indicate that the process is controlled by species diffusion.     

Thin film based semi-active resonant marker design for low profile interventional cardiovascular MRI devices

Objectives

A new microfabrication method to produce low profile radio frequency (RF) resonant markers on catheter shafts was developed. A semi-active RF resonant marker incorporating a solenoid and a plate capacitor was constructed on the distal shaft of a 5 Fr guiding catheter. The resulting device can be used for interventional cardiovascular MRI procedures.

Materials and methods

Unlike current semi-active device visualization techniques that require rigid and bulky analog circuit components (capacitor and solenoid), we fabricated a low profile RF resonant marker directly on guiding the catheter surface by thin film metal deposition and electroplating processes using a modified physical vapor deposition system.

Results

The increase of the overall device profile thickness caused by the semi-active RF resonant marker (130 µm thick) was lowered by a factor of 4.6 compared with using the thinnest commercial non-magnetic and rigid circuit components (600 µm thick). Moreover, adequate visibility performance of the RF resonant marker in different orientations and overall RF safety were confirmed through in vitro experiments under MRI successfully.

Conclusion

The developed RF resonant marker on a clinical grade 5 Fr guiding catheter will enable several interventional congenital heart disease treatment procedures under MRI.

     

Influence of thermal annealing on microstructural,morphological, optical properties and surface electronic structure of copper oxide thin films

In this study, effect of the post-deposition thermal annealing on copper oxide thin films has been systemically investigated. The copper oxide thin films were chemically deposited on glass substrates by spin-coating. Samples were annealed in air at atmospheric pressure and at different temperatures ranging from 200 to 600°C. The microstructural, morphological, optical properties and surface electronic structure of the thin films have been studied by diagnostic techniques such as X-ray diffraction (XRD), Raman spectroscopy, ultraviolet–visible (UV–VIS) absorption spectroscopy, field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The thickness of the films was about 520 nm. Crystallinity and grain size was found to improve with annealing temperature. The optical bandgap of the samples was found to be in between 1.93 and 2.08 eV. Cupric oxide (CuO), cuprous oxide (Cu₂O) and copper hydroxide (Cu(OH)₂) phases were observed on the surface of as-deposited and 600 °C annealed thin films and relative concentrations of these three phases were found to depend on annealing temperature. A complete characterization reported herein allowed us to better understand the surface properties of copper oxide thin films which could then be used as active layers in optoelectronic devices such as solar cells and photodetectors.