All-optical photonic switches using integrated inverted asymmetricFabry-Perot modulators and heterojunction phototransistors

InGaAs/GaAs(100) multiple-quantum-well-based inverted cavity asymmetric Fabry-Perot modulators are vertically integrated with GaAs/AlGaAs heterojunction phototransistors to yield all-optical photonic switches. The photonic switches using `normally on' modulator pixels exhibit an output on-off ratio of 12:1 with internal optical gain of 4 dB. The photonic switches using `normally off' modulator pixels yield similar contrast and gain, but exhibit intrinsic bistable behavior. The inverted cavity modulators employed permit utilizing the transparency of the GaAs substrate at the operating wavelength and offer advantages for fabricating large arrays for optical signal processing     

Analysis of electromagnetic forces in a levitated short rotor LIM.II. Lateral stabilization

For pt.I see ibid., vol.17, no.1, p.95-101 (2002). This paper proposes a method for lateral stabilization of the levitated linear induction motor and also gives the analysis for calculating the stabilizing force in detail. The calculated force has been experimentally verified using the laboratory prototype described previously     

Multiple access for UWB impulse radio with pseudochaotic time hopping

Pseudochaotic time hopping (PCTH) is a previously proposed encoding/modulation scheme for ultra-wideband (UWB) impulse radio. PCTH exploits concepts from symbolic dynamics to generate aperiodic spreading sequences, resulting in a noise-like spectrum. We present a multiple-access technique suitable for the PCTH scheme. In particular, we provide an analytical expression of the bit-error rate performance as a function of the number of users and validate it by simulation.     

Cellular UDP-glucose deficiency caused by a single point mutation in the UDP-glucose pyrophosphorylase gene

We previously isolated a mutant cell that is the only mammalian cell reported to have a persistently low level of UDP-glucose. In this work we obtained a spontaneous revertant whose UDP-glucose level lies between those found in the wild type and the mutant cell. The activity of UDP-glucose pyrophosphorylase (UDPG:PP), the enzyme that catalyzes the formation of UDP-glucose, was in the mutant 4% and in the revertant 56% of the activity found in the wild type cell. Sequence analysis of UDPG: PP cDNAs from the mutant cell showed one missense mutation, which changes amino acid residue 115 from glycine to aspartic acid. The substituted glycine is located within the largest stretch of strictly conserved residues among eukaryotic UDPG:PPs. The analysis of the cDNAs from the revertant cell indicated the presence of an equimolar mixture of the wild type and the mutated mRNAs, suggesting that the mutation has reverted in only one of the alleles. In summary, we demonstrate that the G115D substitution in the Chinese hamster UDPG:PP dramatically impairs its enzymatic activity, thereby causing cellular UDP-glucose deficiency.     

A theoretical study of pulsed laser sampling photon amplifiers

Theoretical studies point to significant improvements in the performance of semiconductor laser amplifiers by injecting carriers with pulsed electric currents of sub-nanosecond duration. A pulsed Fabry-Perot amplifier (FPA) is most sensitive to input lightwave at the instant the carrier density is crossing the critical region, and gives a sharply pulsed sampling effect on the input lightwave signal. Compared with a FPA operating at subcritical electron density, the pulsed amplifier gives much higher gain, peak power, and bandwidth. In fact, pulsed operation of a FPA is also expected to give significantly higher gain and about the same peak output power as a traveling wave amplifier. Pulsed operation also improves the performance of a traveling wave amplifier by attenuating its internally reflected waves     

Evolution of the capillary network in a reactive powder concrete during hydration process

Ultrasonic waves in echographic mode, combined with autogenous shrinkage measurements, were used to study the evolution of the capillary network of reactive powder concrete (RPC) from the time after the mixing. Two characteristic porous classes have been identified: the first, between 10 and 20 nm, begins when the material reaches its solid hyperstatic state, and the second about 1 or 2 nm. The first class is associated with the porous space between the C-S-H hydrate clusters and the second with the internal porosity of the hydrate. The evolution of the active capillary radius as a function of the degree of hydration allows us to understand the strong interaction between the capillary network size and the chemical activity given by the dissipated calorimetric power curve. Indeed, the maximum point of the chemical activity marks the transition of the first class of pores to the second one. Finally, measurements of electrical conductivity through RPC samples show that after the maximum of the dissipated power, the curve of this electrical conductivity presents the same evolution as the capillary radius. As the electrical conductivity clearly depends on the evolution of the capillary network, the similarity between the results confirms our analysis in pore classes.     

Optimizing the service life of drill-collar joints on the basis of fracture mechanics criteria

A method of calculation of the lifetime of fish-mouth collar joints has been proposed that is based on selecting a model and using the criteria of fracture mechanics. By this method it is possible to optimize the design parameters of collar joints as a function of the cyclic crack resistance of steels. It is shown that the lifetime of a collar joint with a fatigue crack can be predicted, and the size of the crack can be estimated for a certain operating time of the collar joint. The critical values of the length of a fatigue crack were calculated for various types and dimensions of collar joints, which is important in fixing the periodicity of crack detection operations.     

Interaction Between a Drying Agent and Particles Dispersed by an Airstream Atomizer Inside a Drying Chamber

Results of an experimental study of the aerodynamics and spray density distribution of a liquid dispersed by an airstream atomizer inside a drying chamber. Velocity components of the drying agent and their radial distributions as a function of the distance from the spray plane are determined. Relationships for the distribution of dispersed liquid inside the drying chamber are derived. Interactions between the drying agent and the product in the drying chamber are analyzed.