The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation

Modification of the eutectic Si in Al-Si foundry alloys by adding strontium or sodium is, unfortunately, accompanied by an increase of porosity in the casting. In an attempt to understand the nature of this problem, this study used a sessile-drop method to investigate the effect of Sr and Na on surface tension and volumetric shrinkage, two probable causes of porosity occur-rence. The addition of 0.01 wt pct Sr and 0.005 wt pct Na to A356 alloy decreases the surface tension of the liquid by about 19 and 10 pct, respectively, and may increase the volume shrink-age by about 12 pct. These changes to surface tension and volumetric shrinkage promote the early formation of the pores during solidification and give the availability of a longer period of growth prior to complete solidification, resulting in a larger pore size. The effect of surface tension on the pores is more significant than volumetric shrinkage. Although the predicted pore diameter increases with lower surface tension or higher volumetric shrinkage, these two effects alone do not seem able to completely account for the observed increase in porosity that is associated with modification.     

Gas-phase modification of rare-earth intermetallic compounds

Recent work concerning the interstitial modification of permanent magnet alloys based on rare-earth iron intermetallic compounds is reviewed. The crystal structure of the new materials is discussed, then the thermodynamic and statistical aspects of the low-temperature interstitial modification process are considered. Finally, reaction kinetics and thermal stability of the new compounds are discussed and future prospects assessed.     

A BiCMOS dynamic carry lookahead adder circuit for VLSIimplementation of high-speed arithmetic unit

A BiCMOS dynamic carry lookahead circuit that is free from race problems is presented. A 16 b full-adder test circuit, which has been designed based on a 2 μm BiCMOS technology, shows a more than five times improvement in speed as compared to the CMOS Manchester carry lookahead (MCLA) circuit. The speed advantage of the BiCMOS dynamic carry lookahead circuit is even greater in a 32- or 64-b adder     

Influence of doping on the electronic structure of (La,Sr)2CuO4

High-statistics (>4 × 10⁸ counts), room-temperature measurements of the electron-positron momentum density of La_2?x Sr _x CuO₄ have been performed for samples with Sr concentrations of x=0.0, 0.1, 0.13, and 0.2. These spectra have been analyzed in conjunction with theoretical calculations of the electron-positron momentum density. The metallic samples show features consistent with the presence of a Fermi surface, but its evolution with increasing Sr concentration does not follow the predictions of band theory. These results may indicate the effects of electron-electron correlation on the electron momentum distribution in the Cu-O plane.     

The domain composition method applied to Poisson's equation in two dimensions

Domain composition, a recently described method for formulating continuum field problems, removes certain restrictions on the construction of finite element models such that it is possible to solve a finite element problem without using a global compatible mesh. The domain composition method couples or otherwise constrains meshes in local regions to obtain a solution equivalent to that produced by conventional finite element methods. In particular, the domain composition method enables finite element models to be formulated with overlapping elements. Several advantages come from this, including an ability to automatically generate a finite element model from a solid geometric model, an ability to use a variety of element types in a single finite element model and an ability to exactly match element boundaries to the local geometry. This paper shows in detail a finite element formulation of Poisson's equation using domain composition and presents certain key algorithms that incorporate the domain composition method into well-established finite element procedures.     

Abnormal behavioral responses to fenfluramine in patients with affective and personality disorders. Correlation with increased serotonergic responsivity

Serotonergic responsivity was assessed in 20 psychiatric patients by the prolactin response to a fenfluramine challenge test. During the fenfluramine challenge 6 of 20 patients (30%) spontaneously reported psychopathologic reactions that included: increased anxiety/agitation, psychotic symptoms, illusions, mood elevation, and anergia. The time of peak behavioral symptoms (2.5 +/- 0.8 hrs) corresponded closely to the time of peak increase in prolactin levels (3.0 +/- 1.1 hr). Abnormal behavioral responders had statistically significant greater increases in prolactin 1 to 4 hr after fenfluramine when compared to normal responders. Patients who developed an abnormal psychopathologic response to fenfluramine were characterized by higher levels of anxiety and agitation at the time of admission to the hospital but otherwise were not distinguishable on the basis of severity of other psychiatric symptoms. This study suggests that increased serotonergic transmission may trigger anxiety, psychosis, and mood elevation in specific vulnerable individuals, whereas other patients with similar psychiatric illnesses are not affected.     

Ceramic Composites Fabricated by Selective Laser Sintering

Selective laser sintering (SLS) uses a computer controlled laser beam to create objects directly from the CAD data without part-specific tooling. In this paper, the effect of material and processing parameters on the microstructure and mechanical properties of an alumina/aluminum phosphate composite fabricated by SLS is described. The precursor material is a blend of alumina and ammonium phosphate powder. This paper deals primarily with the effect of alumina particle size and material composition on the strength of the composite. A constitutive equation is also proposed to relate the mechanical properties of the composite to its microstructural characteristics.     

Paget's disease of the breast in a man without underlying breast carcinoma

A case of histologically confirmed Paget's disease of the breast in a 72 year old man, without underlying breast carcinoma, is reported. This report raises questions about the pathogenesis of this condition and suggests that Paget's disease is an independent, intraepidermal carcinoma rather than a direct extension of intraductal carcinoma of the breast to the nipple and areola.     

Electrical coupling and impulse propagation in anatomically modeledventricular tissue

Computer simulations were used to study the role of resistive couplings on flat-wave action potential propagation through a thin sheet of ventricular tissue. Unlike simulations using continuous or periodic structures, this unique electrical model includes random size cells with random spaced longitudinal and lateral connections to simulate the physiologic structure of the tissue. The resolution of the electrical model is ten microns, thus providing a simulated view at the subcellular level. Flat-wave longitudinal propagation was evaluated with an electrical circuit of over 140,000 circuit elements, modeling a 0.25 mm by 5.0 mm sheet of tissue. An electrical circuit of over 84,000 circuit elements, modeling a 0.5 mm by 1.5 mm sheet was used to study flat-wave transverse propagation. Under normal cellular coupling conditions, at the macrostructure level, electrical conduction through the simulated sheets appeared continuous and directional differences in conduction velocity, action potential amplitude and V˙_max were observed. However, at the subcellular level (10 μm) unequal action potential delays were measured at the longitudinal and lateral gap junctions and irregular wave-shapes were observed in the propagating signal. Furthermore, when the modeled tissue was homogeneously uncoupled at the gap junctions conduction velocities decreased as the action potential delay between modeled cells increased. The variability in the measured action potential was most significant in areas with fewer lateral gap junctions, i.e., lateral gap junctions between fibers were separated by a distance of 100 μm or more