Calcium phosphate incorporated poly(ethylene oxide)‐based nanocomposite electrolytes for lithium batteries. I. Ionic conductivity and positron annihilation lifetime spectroscopy studies

Nanocomposite polymer electrolytes (NCPEs) composed of poly(ethylene oxide), calcium phosphate [Ca₃(PO₄)₂], and lithium perchlorate (LiClO₄)/lithium bis(trifluoromethane sulfonyl)imide [LiN(CF₃SO₂)₂ or LiTFSI] in various proportions were prepared by a hot‐press method. The membranes were characterized by scanning electron microscopy, differential scanning calorimetry, thermogravimetry–differential thermal analysis, ionic conductivity testing, and transference number studies. The free volume of the membranes was probed by positron annihilation lifetime spectroscopy at 30°C, and the results supported the ionic conductivity data. The NCPEs with LiClO₄ exhibited higher ionic conductivities than the NCPE with LiTFSI as a salt. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Pilocarpine‐loaded poly(DL‐lactic‐co‐glycolic acid) nanoparticles as potential candidates for controlled drug delivery with enhanced ocular pharmacological response

The poor corneal residence time of pilocarpine, an alkaloid extracted from the leaves of the Jaborandi plant, limits its ocular application. The aim of this study was to develop, characterize, and evaluate the potential of pilocarpine entrapped by poly(DL ‐lactic‐co‐glycolic acid) (PLGA) nanoparticle carriers for ocular drug delivery. Pilocarpine‐loaded nanoparticles were prepared with a double‐emulsion (water in oil in water) method and characterized with transmission electron microscopy and X‐ray diffraction analysis. The nanoparticles exhibited an average size of 82.7 nm with an encapsulation efficiency of 57%. Stability studies showed the absence of agglomeration and constancy in the amount of drug entrapped; this indicated the solidity of these particles for long‐term use. The in vitro release studies conducted in simulated tear fluid showed the sustained release of pilocarpine. In vivo evaluation of the nanoparticles was done in a rabbit model with a miosis assay and compared to an equal dose of commercially available eye drops of pilocarpine (Pilocar drops). The in vivo miosis studies showed that the duration of miotic response increased by 40% for the nanoparticles and produced an almost 68% increase in total miotic response when compared to the eye drops. In conclusion, this study clearly demonstrated the potential of pilocarpine‐loaded PLGA nanoparticles for multiplying the therapeutic effect of ophthalmic drug delivery with enhanced bioavailability and pharmacological response. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Role of catalyst supports in biocatalysis

Biocatalysis utilizes enzymes and microbial cells as catalysts for a wide range of applications in biotechnology. Immobilization of biocatalysts on various materials has several advantages, including the capacity for reuse, quick reaction termination, easy biocatalyst recovery and operational stability. The present article focuses on the use of material supports for developing immobilized biocatalysts in applications related to energy, environment and chemical synthesis. The work provides a comprehensive overview of a broad class of materials, including organic, inorganic and composites, that have been shown to be prosperous candidates to support the immobilization of enzymes and microbial cells. It also highlights the properties of nanomaterial support such as large surface area and comfort compartment for immobilization. The availability of different types of materials as catalyst support provides an opportunity to understand and develop efficient biocatalytic systems. The choice of selecting a catalyst support will mostly depend on the interaction of the material with the enzyme or microbial cell. Finally, potential challenges, future approaches in developing immobilized biocatalytic systems for various applications and novel material supports are suggested. © 2022 Society of Chemical Industry (SCI).     

Rheological cure characterization of phosphazene–triazine polymers

Cyclomatrix phosphazene–triazine network polymers were synthesized by co‐curing a blend of tris(2‐allylphenoxy), triphenoxy cyclotriphosphazene (TAP), and tris(2‐allylphenoxy) s‐triazine (TAT) with bis(4‐maleimido phenyl) methane (BMM). The co‐curing of the three‐component resin was investigated by dynamic mechanical analysis using rheometry. The cure kinetics of the Diels–Alder step was studied by examining the evolution of the rheological parameters, such as storage modulus (G′), loss modulus (G″), and complex viscosity (η*), for resins of varying compositions at different temperatures. The curing conformed to an overall second‐order phenomenological equation, taking into account a self‐acceleration effect. The kinetic parameters were evaluated by multiple‐regression analysis. The absence of a definite trend in the cure process with blend composition ratio was attributed to the occurrence of a multitude of competitive reactions whose relative rates depend on the reactant ratio and the concentration of the products formed from the initial phase of reaction. The cure was accelerated by temperature for a given composition, whereas the self‐acceleration became less prominent at higher temperature. Gelation was accelerated by temperature. The gel conversion decreased with increase in maleimide concentration and, for a given composition, it was independent of the cure temperature. The activation energy for the initial reaction and the crosslinking process were estimated for a composition with a maleimide‐to‐allyl ratio of 2 : 1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 908–914, 2003     

Ageing studies of pineapple leaf fiber–reinforced polyester composites

This experimental study evaluated the water absorption characteristics of pineapple leaf fiber (PALF)–polyester composites of different fiber content. The degree of water absorption was found to increase with fiber loading. The mechanism of diffusion was analyzed and the effect of fiber loading on the sorption kinetics was studied. The diffusion coefficient was calculated and found to increase with fiber content. Studies were also made to correlate water absorption with the cross‐sectional areas of the specimens. The effects of ageing on the tensile properties and dimensional stability of PALF polyester composites were studied under two different ageing conditions. Ageing studies showed a decrease in tensile strength of the composites. The composite specimens subjected to thermal ageing showed only a slight deterioration in strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 503–510, 2004     

Addition‐cure‐type phenolic resin based on alder‐ene reaction: Synthesis and laminate composite properties

A maleimide‐functional phenolic resin was reactively blended with an allyl‐functional novolac in varying proportions. The two polymers were coreacted by an addition mechanism through Alder‐ene and Wagner–Jauregg reactions to form a crosslinked network system. The cure characterization was done by differential scanning calorimetry and dynamic mechanical analysis. The system underwent a multistep curing process over a temperature range of 110–270°C. Although the cure profiles were independent of the composition, the presence of maleimide led to a reduced isothermal gel time of the blend. Increasing the allylphenol content decreased the crosslinking in the cured matrix, leading to enhanced toughness and improved resin‐dominant mechanical properties of the resultant silica laminate composites. Changing the reinforcement from silica to glass resulted in further amelioration of the resin‐reinforcement interaction, but the resin‐dominant properties of the composite remained unaltered. Increasing the maleimide content resulted in enhanced thermal stability. Integrating both the reactive groups in a single polymer and its curing led to enhanced thermal stability and T_g, but to decreased mechanical properties of the laminate composites. This can be attributed to a brittle matrix resulting from enhanced crosslinking facilitated by interaction of the reactive groups located on the polymer of an identical backbone structure. The cured polymers showed a T_g in the range of 170–190°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 737–749, 2001     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Effect of co‐solvents on the photovoltaic performance of an inverted organic solar cell

We investigated the effect of varying polymer crystallinity, morphology, and optical property, produced by adding four different co‐solvents in to the poly(3‐hexylthiophene) (P3HT): [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) active layer blend solution, on the functioning of an inverted polymeric solar device. Photovoltaic devices primed with cyclohexanone co‐solvent showed the best performance with power conversion efficiency (PCE) reaching a value of 3.01 ± 0.04%. Improvement in efficiency is related to an increase in photocurrent which is due to a combined result of ordered P3HT crystallite growth, as well as of the precise size and phase separation of domains. POLYM. ENG. SCI., 55:1382–1388, 2015. © 2015 Society of Plastics Engineers     

Ternary Solvent System to Control the Morphology of Active Blend in Inverted Organic Solar Cells

Bulk heterojunction blend of poly(3-hexylthiophene)–[6,6]-phenyl-C₆₁-butyric acid methyl ester prepared using the ternary solvent mixture was used as the active layer of an inverted organic solar cell. The ternary solvent mixture consisted of a good solvent such as ortho-dichlorobenzene and two marginal solvents such as cyclohexanone and toluene offering limited solubility to the poly(3-hexylthiophene) component. Power conversion efficiency of inverted device was found to decrease from 2.74?±?0.05% in the unmodified device to 2.64?±?0.07% in the modified device. UV–visible measurement revealed less efficient photoabsorption in the mixed cosolvent-casted active layer due to insufficient and disordered crystallization of poly(3-hexylthiophene) domains.     

TETRA-BUTYL-MALONAMIDE AND TETRA-ISOBUTYL MALONAMIDE AS EXTRACTANTS FOR URANIUM(VI) AND PLUTONIUM(IV)

ABSTRACT

Two new symmetrical diamides, namely straight-chain alkyl substituted neutral tetra-butyl-malonamide(TBMA) and sterlcally hindered branched-chain alkyl substituted tetra-isobutyl malonamide(TIBMA) were synthesised, characterised and used for the extraction of U(VI) and Pu(IV) from nitric acid media into n-dodecane. Both the cations were found to be extracted as their disolvates. Interestingly TBMA extracted more efficiently than TIBMA but afforded poor selectivity for Pu/U separation. The thermodynamic parameters involved in the extraction, determined by the temperature variation method, indicated the reactions in all cases to be enthalpy favoured. Entropy was found to be counteracting the extraction of U(VI) and favouring the extraction of Pu(IV). The recovery of diamides from the loaded actinides could be easily accomplished by using dilute oxalic acid or dilute U(IV) as the strippant for Pu(IV) and using dilute Na₂C0₃ as that for U(VI).