Multifunctional Ir–Ru alloy catalysts for reversal-tolerant anodes of polymer electrolyte membrane fuel cells

To address the problem of fuel starvation in fuel-cell electric vehicles,which causes cell voltage reversal and results in cell failure when repeated continuously,we developed a reversal-tolerant anode(RTA) to promote water oxidation in preference to carbon corrosion.Graphitized carbon-supported Ir-Ru alloys with different compositions are employed as RTA catalysts in an acidic polyol solution and are shown to exhibit composition-dependent average crystallite sizes of <5.33 nm.The adopted approach allows the generation of relatively well-dispersed Ir-Ru alloy nanoparticles on the carbon support without severe agglomeration.The activity of IrRu₂/C for the hydrogen oxidation reaction is 1.10 times that of the stateof-the-art Pt/C catalyst.Cell reversal testing by simulation of fuel starvation reveals that the durability of IrRu₂/C(~7 h) significantly exceeds that of the conventional Pt/C catalyst(~10 min) and is the highest value reported so far.Thus,the developed Ir-Ru alloy catalyst can be used to fabricate practical RTAs and replace Pt catalysts in the anodes of polymer electrolyte membrane fuel cells.     

A Silica‐Aerogel‐Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

High‐energy all‐solid‐state lithium (Li) batteries have great potential as next‐generation energy‐storage devices. Among all choices of electrolytes, polymer‐based systems have attracted widespread attention due to their low density, low cost, and excellent processability. However, they are generally mechanically too weak to effectively suppress Li dendrites and have lower ionic conductivity for reasonable kinetics at ambient temperature. Herein, an ultrastrong reinforced composite polymer electrolyte (CPE) is successfully designed and fabricated by introducing a stiff mesoporous SiO₂ aerogel as the backbone for a polymer‐based electrolyte. The interconnected SiO₂ aerogel not only performs as a strong backbone strengthening the whole composite, but also offers large and continuous surfaces for strong anion adsorption, which produces a highly conductive pathway across the composite. As a consequence, a high modulus of ≈0.43 GPa and high ionic conductivity of ≈0.6 mS cm^?1 at 30 °C are simultaneously achieved. Furthermore, LiFePO₄–Li full cells with good cyclability and rate capability at ambient temperature are obtained. Full cells with cathode capacity up to 2.1 mAh cm^?2 are also demonstrated. The aerogel‐reinforced CPE represents a new design principle for solid‐state electrolytes and offers opportunities for future all‐solid‐state Li batteries.     

Simultaneous refining of phosphorus and sulfur from hot metal utilizing recycled sinter ore dust

An experimental study is carried out to determine the possibility of utilizing the recycled sinter ore dust for refinging flux for hot metal. The dust has good physical and chemical properties as an injection powder, however, it contains masses of about 0.24% S and a substantial amount of sulfur which can be picked up by the hot metal during the injection treatment. Therefore, sinter ore dust is mixed with burnt lime, fluorspar and sodium carbonate to increase the sulfide capacity of the flux. The fluxes are tested for hot metal dephosphorization and desulfurization in laboratory and plant scale experiments. The fluxes show an excellent dephosphorization efficiency without sulfur pick up. In case of the flux containing sodium carbonate masses of 10%, sulfur in hot metal is simultaneously removed. In addition, a higher manganese yield in hot metal is obtained in case of a sodium carbonate containing flux at the end of injection treatment.     

The virion host shutoff protein of herpes simplex virus inhibits reporter gene expression in the absence of other viral gene products

The virion host shutoff (vhs) function of herpes simplex virus induces degradation of host mRNAs at early times and rapid turnover of viral mRNAs throughout infection. Previous studies have shown that disruption of the UL41 gene abrogates vhs activity, but have not determined whether the UL41 polypeptide is the direct inducer of mRNA degradation or whether it is the only virion component required for this activity. In this paper we report that transfection of cells with UL41 inhibits expression of a cotransfected CAT reporter gene and that the inhibition is not dependent upon other viral genes. Inhibition of CAT expression was due to UL41-dependent reduction of CAT mRNA levels. UL41 alleles encoding polypeptides that lacked vhs activity during virus infections exhibited a similar lack of activity in transfected cells. The results indicate that the UL41 polypeptide is the direct inducer of host mRNA degradation following virus infection and that it is the only virion component directly required for this activity. A 382-amino-acid nonsense polypeptide missing the last 107 residues of UL41 lacked inhibitory activity, but was packaged into virions, while a 343-amino-acid nonsense polypeptide lacked both inhibitory activity and the ability to be packaged.     

The essential Gcd10p-Gcd14p nuclear complex is required for 1-methyladenosine modification and maturation of initiator methionyl-tRNA

Gcd10p and Gcd14p are essential proteins required for the initiation of protein synthesis and translational repression of GCN4 mRNA. The phenotypes of gcd10 mutants were suppressed by high-copy-number IMT genes, encoding initiator methionyl tRNA (tRNAiMet), or LHP1, encoding the yeast homolog of the human La autoantigen. The gcd10-504 mutation led to a reduction in steady-state levels of mature tRNAiMet, attributable to increased turnover rather than decreased synthesis of pre-tRNAiMet. Remarkably, the lethality of a GCD10 deletion was suppressed by high-copy-number IMT4, indicating that its role in expression of mature tRNAiMet is the essential function of Gcd10p. A gcd14-2 mutant also showed reduced amounts of mature tRNAiMet, but in addition, displayed a defect in pre-tRNAiMet processing. Gcd10p and Gcd14p were found to be subunits of a protein complex with prominent nuclear localization, suggesting a direct role in tRNAiMet maturation. The chromatographic behavior of elongator and initiator tRNAMet on a RPC-5 column indicated that both species are altered structurally in gcd10Delta cells, and analysis of base modifications revealed that 1-methyladenosine (m1A) is undetectable in gcd10Delta tRNA. Interestingly, gcd10 and gcd14 mutations had no effect on processing or accumulation of elongator tRNAMet, which also contains m1A at position 58, suggesting a unique requirement for this base modification in initiator maturation.     

Thermodynamical,economical and environmental evaluation of high efficiency gas turbine cogeneration systems

The paper evaluates the thermodynamical, economical and environmental characteristics of a cogeneration system composed of a gas turbine and a waste heat boiler (system A). Two other systems for increasing power generating efficiency are also evaluated, namely systems B and C, which are constructed by incorporating a regenerative cycle and a dual fluid cycle, respectively, into system A. It has been estimated that system C satisfies an environmental constraint that the nitrogen oxide density exhausted should be less than 100 parts in 10⁶, and that systems A and B also satisfy this constraint if a small amount of steam is injected into the combustor. The power generating efficiencies of systems A and B, in this case, and that of system C have been estimated to be 33.5%, 38.5% and 41.2%, respectively; i.e. the efficiencies of systems B and C can be improved noticeably compared with that of system A. The economics of these systems have also been evaluated based on the value of a profit index, and the systems are all estimated to be economically viable under the conditions assumed. As a result, it has been shown that it is possible to construct cogeneration systems with satisfactory characteristics of both environmental protection and profitability if system A is used in districts where the heat demand is large, system C in districts where the heat demand is small, and system B in districts with intermediate heat demand.