住宅景观绩效评价:基于现场数据的视觉与生物气候学分析

2011至2012年间,美国风景园林基金会(Landscape Architecture Foundation,简称LAF)的景观绩效系列(Landscape Performance Series)发表了70余个案例研究。住宅景观的项目虽然在专业实践中相当常见,但LAF的文集中却没有涉及。为了填补这一空缺,文章介绍了位于美国科罗拉多州皮特金县(Pitkin County)的3个住宅景观的评估。文章重点关注了其中2个不同项目基于一手现场数据的视觉和生物气候学分析,突出了景观设计实现社会效益的可能性。视觉分析表明,景观设计可以为将近98%的不佳视线提供缓;中。而生物气候学分析表明,归为人体舒适区的户外空间与居民自我感知的区域相一致。除了证实景观设计的有效性,本研究还能为衡量社会层面的景观绩效提供有效的方法,从而有助于改善未来的住宅景观设计。     

Degradation of bromoxynil and trifluralin in natural water by direct photolysis and UV plus H2O2 advanced oxidation process

The degradation of two pesticides, bromoxynil and trifluralin, was investigated in ultrapure and natural water solutions under ultraviolet (UV) light and a combination of UV and hydrogen peroxide (H₂O₂). The effect of pH on the photooxidation of the pesticides was also studied. The results indicated that under direct photolysis with monochromatic light at 253.7 nm and different conditions, the photochemical rates followed first-order kinetics, with fluence-based rate constants ranging from 9.15 × 10⁻⁴ to 6.37 × 10⁻³ cm² mJ⁻¹ and 7.63 × 10⁻³ to 1.47 × 10⁻² cm² mJ⁻¹ for bromoxynil and trifluralin, respectively. Quantum yields, in the range of 0.08-0.25 for bromoxynil and 0.12-0.72 for trifluralin, were observed in experiments using ultrapure water. The study also found that the UV/H₂O₂ process enhanced the oxidation rate in comparison to direct photolysis. A 90% degradation with UV dose of 333 and 188 mJ cm⁻² was achieved for bromoxynil and trifluralin, respectively, in natural water, in presence of 8.8 × 10⁻⁴ M H₂O₂. To assess the aquatic toxicity, the Microtox^® 81.9% screening test protocol was used before and after treatment. The test results indicated a decrease in the acute toxicity of the samples after treatment for both pesticides.     

Structural performance of alkali/acid-ultrasound modified Agave fibers during the melt mixing process with polyvinyl alcohol

This study aims to investigate changes in the structural properties of alkali/acid-ultrasound modified Agave fibers and their performance immersed on a polyvinyl alcohol (PVA) matrix with plasticizer during melt mixing processing. Structural analysis revealed that ultrasound enhances the effectiveness of the conventional alkaline/acid treatments to modify fibers since the simultaneous treatment increased the partial removal of lignocellulosic components, water molecules, and amorphous regions which improved their processability on a PVA matrix. Specific energy consumption values indicated that during melt mixing the modified fibers required more energy to expose the chains of cellulose fraction to function as an interaction site for PVA chains. Once the mixture was homogenized, the fiber-matrix interactions promoted high viscosity, friction, and mechanical stress in the chamber. Therefore, the modified fibers restricted the interaction between plasticizer and PVA in the obtained films, resulting in a highly structured, and reinforced network, increasing the storage modulus as dynamic mechanical analysis indicated. These findings highlight a feasible way to valorize Agave fibers and allow the understanding of the matrix-fiber interactions during melt mixing processing, useful to predict the structural and mechanical properties of the films.     

TRPM7-Mediated Calcium Transport in HAT-7 Ameloblasts

TRPM7 plays an important role in cellular Ca²⁺, Zn²⁺ and Mg²⁺ homeostasis. TRPM7 channels are abundantly expressed in ameloblasts and, in the absence of TRPM7, dental enamel is hypomineralized. The potential role of TRPM7 channels in Ca²⁺ transport during amelogenesis was investigated in the HAT-7 rat ameloblast cell line. The cells showed strong TRPM7 mRNA and protein expression. Characteristic TRPM7 transmembrane currents were observed, which increased in the absence of intracellular Mg²⁺ ([Mg²⁺]_i), were reduced by elevated [Mg²⁺]_i, and were inhibited by the TRPM7 inhibitors NS8593 and FTY720. Mibefradil evoked similar currents, which were suppressed by elevated [Mg²⁺]_i, reducing extracellular pH stimulated transmembrane currents, which were inhibited by FTY720. Naltriben and mibefradil both evoked Ca²⁺ influx, which was further enhanced by the acidic intracellular conditions. The SOCE inhibitor BTP2 blocked Ca²⁺ entry induced by naltriben but not by mibefradil. Thus, in HAT-7 cells, TRPM7 may serves both as a potential modulator of Orai-dependent Ca²⁺ uptake and as an independent Ca²⁺ entry pathway sensitive to pH. Therefore, TRPM7 may contribute directly to transepithelial Ca²⁺ transport in amelogenesis.     

Transforming shortcomings into opportunities: Can market incentives solve Lebanon's energy crisis?

Over the past decades Lebanon's energy sector has been largely ignored and this has led to high economic and environmental costs. The sector is characterized by electricity poverty, an expanding and mainly unregulated transport sector and a lack of energy savings spanning through all sectors of the economy. Recently, the Government of Lebanon has committed to increase the share of renewable energy to 10% of the total energy supply by 2013 and to 12% by the year 2020; it also aims at reducing energy consumption by 6% by the year 2013. This paper aims at contributing to the formulation of a more comprehensive energy strategy for Lebanon by analyzing the recent changes in policy direction and by recommending legal, regulatory and policy measures in order to transform current shortcomings into opportunities allowing the country to become a regional ‘success story’ in the deployment of renewable energy and energy efficiency.     

The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

From Stem Cells to Bone-Forming Cells

Bone formation starts near the end of the embryonic stage of development and continues throughout life during bone modeling and growth, remodeling, and when needed, regeneration. Bone-forming cells, traditionally termed osteoblasts, produce, assemble, and control the mineralization of the type I collagen-enriched bone matrix while participating in the regulation of other cell processes, such as osteoclastogenesis, and metabolic activities, such as phosphate homeostasis. Osteoblasts are generated by different cohorts of skeletal stem cells that arise from different embryonic specifications, which operate in the pre-natal and/or adult skeleton under the control of multiple regulators. In this review, we briefly define the cellular identity and function of osteoblasts and discuss the main populations of osteoprogenitor cells identified to date. We also provide examples of long-known and recently recognized regulatory pathways and mechanisms involved in the specification of the osteogenic lineage, as assessed by studies on mice models and human genetic skeletal diseases.