Experimental deformation analysis of an adhesively bonded multi-material joint for marine applications

The strength and deformation of full-scale adhesively bonded multi-material joints is studied in this paper. Four joints with a thick layer of methyl methacrylate adhesive (MMA) have been manufactured in shipyard conditions. In two specimens, cracks have been introduced at steel–adhesive and composite–adhesive interfaces. One cracked and one un-cracked specimen were subjected to quasi-static tensile testing; the two remaining specimens were stepwise loaded/unloaded with increasing load until failure. The strain in the adhesive layers was measured with digital image correlation (DIC). This showed a predominant shear deformation and dissimilar shear strain patterns for different bond lines. Fibre Bragg (FBG) sensors were used to monitor strains at steel and composite constituents and to detect the onset and evolution of damage in the un-cracked specimen. Strains measured by FBG sensors correspond well with DIC results at nearby regions. All specimens failed by delamination of the composite panel near the composite–adhesive interface.     

A hybrid approach to asset allocation with simultaneous consideration of suitability and optimality

In this paper, we develop mathematical models for simultaneous consideration of suitability and optimality in asset allocation. We use a hybrid approach that combines behavior survey, cluster analysis, analytical hierarchy process and fuzzy mathematical programming.     

Acoustic modeling problem for automatic speech recognition system: conventional methods (Part I)

In automatic speech recognition (ASR) systems, the speech signal is captured and parameterized at front end and evaluated at back end using the statistical framework of hidden Markov model (HMM). The performance of these systems depend critically on both the type of models used and the methods adopted for signal analysis. Researchers have proposed a variety of modifications and extensions for HMM based acoustic models to overcome their limitations. In this review, we summarize most of the research work related to HMM-ASR which has been carried out during the last three decades. We present all these approaches under three categories, namely conventional methods, refinements and advancements of HMM. The review is presented in two parts (papers): (i) An overview of conventional methods for acoustic phonetic modeling, (ii) Refinements and advancements of acoustic models. Part I explores the architecture and working of the standard HMM with its limitations. It also covers different modeling units, language models and decoders. Part II presents a review on the advances and refinements of the conventional HMM techniques along with the current challenges and performance issues related to ASR.     

Quintic nonpolynomial spline method for the solution of a second-order boundary-value problem with engineering applications

Nonpolynomial quintic spline functions are used to develop a numerical algorithm for computing an approximation to the solution of a system of second order boundary value problems associated with heat transfer. We show that the approximate solutions obtained by our algorithm are better than those produced by other spline and domain decomposition methods. A comparison of our algorithm with nonpolynomial quadratic spline method is discussed with the help of two numerical examples.     

Linguistic Discriminative Aggregation in Multicriteria Decision Making

Several new aggregation operators are proposed in the context of multicriteria decision making (MCDM) in the linguistic domain. The proposed operators first infer the discrimination index, based on the extent of variability in the various linguistic evaluations against a criterion. This value is then utilized in the actual aggregation step to discriminate among the alternatives. Besides, the proposed operators also take into account the a priori weights associated with the criteria. The proposed concepts are illustrated through an example in group MCDM.     

Experimental characterization of piezoelectrically actuated micromachined silicon valveless micropump

In this paper, performance of piezoelectrically actuated pyramidal valveless micropumps is studied experimentally in detail. Valveless micropumps based on silicon and glass substrate are fabricated using MEMS technology. Two different sizes of micropumps having overall dimensions of 5 mm × 5 mm × 1 mm and 10 mm × 10 mm × 1 mm are fabricated and characterized. In the fabricated micropumps, the thickness of silicon diaphragm is <20 µm which gives the advantage of operating pump at low voltage with excellent stability and consistency. The performance of micropumps in terms of flowrate and backpressure is evaluated for a wide range of driving frequency and actuating voltages. The maximum flowrate of water in the 10-mm micropump is 355 µl/min and backpressure of 3.1 kPa at zero flowrate for an applied voltage of 80 V at frequency 1.05 kHz. The reported micropumps have low footprint, high flowrate and backpressure. Thus, these micropumps are especially suited for biological applications as these can withstand adequate amount of backpressure. Comparative study of the performance of these micropumps with those available in the literature brings out the efficacy of these micropumps.     

MODEEP: a motion-based object detection and pose estimation method for airborne FLIR sequences

In this paper, we present a method called MODEEP (Motion-based Object DEtection and Estimation of Pose) to detect independently moving objects (IMOs) in forward-looking infrared (FLIR) image sequences taken from an airborne, moving platform. Ego-motion effects are removed through a robust multi-scale affine image registration process. Thereafter, areas with residual motion indicate potential object activity. These areas are detected, refined and selected using a Bayesian classifier. The resulting regions are clustered into pairs such that each pair represents one object's front and rear end. Using motion and scene knowledge, we estimate object pose and establish a region of interest (ROI) for each pair. Edge elements within each ROI are used to segment the convex cover containing the IMO. We show detailed results on real, complex, cluttered and noisy sequences. Moreover, we outline the integration of our fast and robust system into a comprehensive automatic target recognition (ATR) and action classification system.     

Matching three-dimensional objects using silhouettes

A method for matching three-dimensional objects against a library of models from an observed sequence of silhouettes is presented in this correspondence. Based upon the observed silhouettes, the three-dimensional structure of the object is constructed and refined. The principal moments and three primary silhouettes are computed for the constructed three-dimensional objects to represent the aggregate and detailed structure parameters. The adaptive matching technique requires that sufficient silhouettes be added to modify the structure of the unknown object until consistent and steady matching results are obtained. The library for matching is based on three primary silhouettes of the model objects. Experiments conducted show a fast convergence to a consistent result may be achieved provided that a reasonable choice of silhouettes is made.     

Detection of edges using range information

Range data provide an important source of 3-D shape information. This information can be used to extract jump boundaries which correspond to occluding boundaries of objects in a scene and ``edges' which correspond to points lying between significantly different regions on the surface of objects. We are mainly interested in range data obtained from sensors such as lasers. The main problem with this type of range finder is the fact that the accuracy of the measurements depends on the power of the signal that reaches the receiver. This study describes how a range edge detection procedure can be designed that has low sensitivity to noise and imbeds all the knowledge available on the range measurement accuracy.     

Exploring context and content links in social media: a latent space method

Social media networks contain both content and context-specific information. Most existing methods work with either of the two for the purpose of multimedia mining and retrieval. In reality, both content and context information are rich sources of information for mining, and the full power of mining and processing algorithms can be realized only with the use of a combination of the two. This paper proposes a new algorithm which mines both context and content links in social media networks to discover the underlying latent semantic space. This mapping of the multimedia objects into latent feature vectors enables the use of any off-the-shelf multimedia retrieval algorithms. Compared to the state-of-the-art latent methods in multimedia analysis, this algorithm effectively solves the problem of sparse context links by mining the geometric structure underlying the content links between multimedia objects. Specifically for multimedia annotation, we show that an effective algorithm can be developed to directly construct annotation models by simultaneously leveraging both context and content information based on latent structure between correlated semantic concepts. We conduct experiments on the Flickr data set, which contains user tags linked with images. We illustrate the advantages of our approach over the state-of-the-art multimedia retrieval techniques.