Direction prediction for avoiding occlusion in visual surveillance

Occurrence of occlusion while providing visual surveillance leads to anarchy as the track of the subject under motion may be lost. This often results into the failure of the surveillance system. The approach of predicting motion of moving subjects and hence the chances of their mutual occlusion gives an upper hand to surveillance system to take in-time necessary action towards mitigation of loss of track during dynamic occlusion. Direction of motion of a moving subject plays a major role while studying its motion. Direction along with the velocity of a subject in a 3D plane completely describes the motion of any subject. This article proposes a model‘-based approach for direction prediction of a moving subject in a 3D global plane as acquired in a 2D camera plane. The proposed approach uses the eight discrete directions of motion as proposed in and models different directions. The proposed direction prediction method is experimentally verified with six different classifiers, i.e. regression analysis, simple logistic regression, MLP, k-NN, SVM and Bays classifier over existing as well as self-acquired databases. The initial simulation results are motivating as the overall accuracies achieved through different classifiers are of the range of 87–94 \(\%\), which advocates the suitability of the said approach.     

(Approximate) Uncertain Skylines

Given a set of points with uncertain locations, we consider the problem of computing the probability of each point lying on the skyline, that is, the probability that it is not dominated by any other input point. If each point’s uncertainty is described as a probability distribution over a discrete set of locations, we improve the best known exact solution. We also suggest why we believe our solution might be optimal. Next, we describe simple, near-linear time approximation algorithms for computing the probability of each point lying on the skyline. In addition, some of our methods can be adapted to construct data structures that can efficiently determine the probability of a query point lying on the skyline.     

Real-Time Global Illumination for VR Applications

Real-time global illumination in VR systems enhances scene realism by incorporating soft shadows, reflections of objects in the scene, and color bleeding. The Virtual Light Field (VLF) method enables real-time global illumination rendering in VR. The VLF has been integrated with the Extreme VR system for real-time GPU-based rendering in a Cave Automatic Virtual Environment.     

Change point detection for compositional multivariate data

Change point detection algorithms have numerous applications in areas of medical condition monitoring, fault detection in industrial processes, human activity analysis, climate change detection, and speech recognition. We consider the problem of change point detection on compositional multivariate data (each sample is a probability mass function), which is a practically important sub-class of general multivariate data. While the problem of change-point detection is well studied in univariate setting, and there are few viable implementations for a general multivariate data, the existing methods do not perform well on compositional data. In this paper, we propose a parametric approach for change point detection in compositional data. Moreover, using simple transformations on data, we extend our approach to handle any general multivariate data. Experimentally, we show that our method performs significantly better on compositional data and is competitive on general data compared to the available state of the art implementations.

     

Experimental deformation analysis of an adhesively bonded multi-material joint for marine applications

The strength and deformation of full-scale adhesively bonded multi-material joints is studied in this paper. Four joints with a thick layer of methyl methacrylate adhesive (MMA) have been manufactured in shipyard conditions. In two specimens, cracks have been introduced at steel–adhesive and composite–adhesive interfaces. One cracked and one un-cracked specimen were subjected to quasi-static tensile testing; the two remaining specimens were stepwise loaded/unloaded with increasing load until failure. The strain in the adhesive layers was measured with digital image correlation (DIC). This showed a predominant shear deformation and dissimilar shear strain patterns for different bond lines. Fibre Bragg (FBG) sensors were used to monitor strains at steel and composite constituents and to detect the onset and evolution of damage in the un-cracked specimen. Strains measured by FBG sensors correspond well with DIC results at nearby regions. All specimens failed by delamination of the composite panel near the composite–adhesive interface.     

A hybrid approach to asset allocation with simultaneous consideration of suitability and optimality

In this paper, we develop mathematical models for simultaneous consideration of suitability and optimality in asset allocation. We use a hybrid approach that combines behavior survey, cluster analysis, analytical hierarchy process and fuzzy mathematical programming.     

Quintic nonpolynomial spline method for the solution of a second-order boundary-value problem with engineering applications

Nonpolynomial quintic spline functions are used to develop a numerical algorithm for computing an approximation to the solution of a system of second order boundary value problems associated with heat transfer. We show that the approximate solutions obtained by our algorithm are better than those produced by other spline and domain decomposition methods. A comparison of our algorithm with nonpolynomial quadratic spline method is discussed with the help of two numerical examples.     

Segmented object manufacturing

Rapid Prototyping (RP) is a technology based on a “divide-and-conquer” strategy that enables automatic physical realization of a design without any special tooling. However, existing RP processes suffer from staircase defects since they are all based on 2.5-axis kinematics. To minimize the error due to staircase defects parts are normally built from very thin layers typically with thickness values of 0.010 to 0.300 mm. Therefore, hundreds of layers are required to produce a typical object making RP a slow and costly process. To overcome these limitations, a new RP process called Segmented Object Manufacturing (SOM) is proposed in this paper. SOM makes use of three-axis kinematics in conjunction with a novel slicing method. Slicing in SOM is based on certain visibility-based considerations and is independent of the part accuracy. Since only a few thick layers are used in the SOM technique, a part can be produced faster and cheaper with an accuracy comparable to that of CNC machining.     

A comparative dielectric relaxation study of PMN–PT and PMN–PZ ceramics using impedance spectroscopy

AC-impedance spectroscopic studies in the temperature range of 30–400 °C are carried out on solid solutions of lead magnesium niobate (PMN) with lead titanate (PT) and lead zirconate (PZ), both of them in the 65/35 atomic ratio. For PMN–PT this corresponds to the morphotropic phase boundary composition (with normal ferroelectric behaviour), and for PMN–PZ it is near the phase boundary between normal ferroelectric and relaxor ferroelectric compositions. The variation of dielectric permittivity with temperature at different frequencies shows normal ferroelectric and relaxor-like dependence for PMN–PT and PMN–PZ, respectively. Temperature-dependent spectroscopic modulus plots reveal a much broader peak for PMN–PZ compared to that for PMN–PT, which is consistent with the dielectric behaviour. PMN–PT shows nearly ideal Debye behaviour below T_m (the temperature of the permittivity maximum) and the behaviour departs from ideality above T_m, whereas non-ideal Debye behaviour is seen both below and above T_m for PMN–PZ. Complex modulus plots fit well with two depressed semicircles and three depressed semicircles, respectively, for PMN–PT and PMN–PZ. The relaxation observed in the spectroscopic plots around 1 MHz for PMN–PT has been assigned to polarisation relaxation expected for normal-sized domains. No such relaxation could be observed for PMN–PZ around 1 MHz because of the mesoscopic domain sizes.