Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds

The direct ink writing of an ink composed of a preceramic polymer and fillers was used to produce hardystonite (Ca₂ZnSi₂O₇) bioceramic scaffolds. Suitable formulations were developed for the extrusion of fine filaments (350 μm diameter) through a nozzle. The preceramic polymer was employed with the double purpose of contributing to the rheology of the ink by increasing its viscosity and of forming the hardystonite phase upon heat treatment by reacting with the fillers. A control of the rheology is essential when spanning features have to be produced, and therefore the main rheological characteristics of the inks were measured (flow curves, dynamic oscillation tests, viscosity recovery tests) and compared to models reported in the literature. Highly porous scaffolds (up to 80% total porosity) were produced and heat treated in air or in nitrogen atmosphere. The influence of the heat‐treatment atmosphere on the morphology, crystalline phase assemblage, and compressive strength of the scaffolds was investigated.     

Color‐Coded Super‐Resolution Small‐Molecule Imaging

Although the development of super‐resolution microscopy dates back to 1994, its applications have been primarily focused on visualizing cellular structures and targets, including proteins, DNA and sugars. We now report on a system that allows both monitoring of the localization of exogenous small molecules in live cells at low resolution and subsequent super‐resolution imaging by using stochastic optical reconstruction microscopy (STORM) on fixed cells. This represents a powerful new tool to understand the dynamics of subcellular trafficking associated with the mode and mechanism of action of exogenous small molecules.     

Integrating a Human Behavior Model within an Agent‐Based Approach for Blasting Evacuation

Several studies on Emergency Management are available in the literature, but most of them do not consider how the human behavior during an emergency can affect the evacuation process. Therefore, the novel contribution of this article is the implementation of an agent‐based model to describe the evacuation, due to a blast in a public area, integrated with a human behavior analytical model. Each agent has its own behavior that is described in a layered framework. The first layer simulates the “agent's features” function. Then, an “individual module” describes dynamically the emotional aspects using (i) the Decision Field Theory, (ii) a stationary stochastic model, and (iii) the results coming from a questionnaire. An agent‐based model with integrated human behavior is proposed to test critical infrastructures in emergency conditions without performing full scale evacuation tests. Analyses could be performed both in real time with a hazard scenario and at the design level to predict the system response to identify the optimal configuration. Therefore, the development of the proposed methodology could support both designers and policy makers in the decision‐making process.     

Preceramic polymer‐derived SiOC fibers by electrospinning

Silicon oxycarbide (SiOC) fibers with different chemical compositions were successfully fabricated by electrospinning a mixture of polyvinylpyrrolidone (PVP) and commercially available polymethylsilsesquioxane (MK) or polymethylphenylsilsesquioxane (H44) preceramic polymers, followed by cross‐linking and pyrolysis at 1000°C in Argon. The influence of the processing procedure (solvent selection, cross‐linking catalyst and additives) on the morphology of the produced fibers was investigated. For the MK/isopropanol system, the introduction of 20 vol% N,N‐dimethylformamide (DMF) enabled to decrease the diameter of the as‐spun fibers from 2.72 ± 0.12 μm to 1.65 ± 0.09 μm. For the H44/DMF systems, beads‐free fibers were obtained by adding 50 vol% choloroform. After pyrolysis, the resultant SiOC fibers derived from MK and H44 resins possessed uniform morphology, with an average diameter of 0.97 ± 0.07 μm and 1.07 ± 0.08 μm, respectively. Due to their different chemical compositions, the MK‐derived and H44‐derived SiOC ceramic fibers could find different potential applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39836.     

Isothermal and non‐isothermal crystallization of poly(L‐lactic acid)/poly(butylene terephthalate) blends

Isothermal and non‐isothermal crystallization kinetics of poly(l ‐lactic acid)/poly(butylene terephthalate) (PLLA/PBT) blends containing PLLA as major component is detailed in this contribution. PLLA and PBT are not miscible, but compatibility of the polymer pair is ensured by interactions between the functional groups of the two polyesters, established upon melt mixing. Crystal polymorphism of the two polyesters is not influenced by blending, as probed by wide‐angle X‐ray analysis. The addition of PLLA does not affect the temperature range of crystallization kinetics of PBT, nor the crystallinity level attained when the blends are cooled from the melt at constant rate. Conversely, PBT favors crystallization of the biodegradable polyester. The addition of PBT results in an anticipated onset of crystallization of PLLA during cooling at a fixed rate, with a sizeable enhancement of the crystal fraction. Isothermal crystallization analysis confirmed the faster crystallization rate of PLLA in the presence of PBT. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40372.     

Cellular neural networks as a general massively parallel computational paradigm

In this paper is presented the use of the discrete-time cellular neural network (DTCNN) paradigm to develop algorithms devised for general-purpose massively parallel processing (MPP) systems. This paradigm is defined in discrete N-dimensional spaces (lattices) and is characterized by the locality of the direct information transmission between the space points (cells) and by continuous values of data and parameters; the DTCNN paradigm is thus able to express most of the typical MPP applications. A general version of a DTCNN has been implemented and optimized for three MPP architectures, namely the Connection Machines CM-2 and CM-5 and the Cray T3D. The comparison between the three machine performances with those achieved by a standard SPARC-20 workstation shows that, particularly with large lattices, the speed-up allowed in the computational times is significant and the range of solvable problem sizes is widely extended.     

Piperazine and methyldiethanolamine interrelationships in CO2 absorption by aqueous amine mixtures. Part II—Saturation rates of mixed reagent solutions

This work is a companion to a previous article, Part I, published in The Canadian Journal of Chemical Engineering, dealing with CO₂ absorption in aqueous solutions containing a single aminic reagent (specifically methyldiethanolamine (MDEA) or piperazine (PZ)). In this second part, different PZ/MDEA mixtures are experimentally studied and their performances are compared with that of the single reagents. It is indeed well known that small quantities of PZ added to MDEA aqueous solutions are sufficient to obtain a significant improvement in the kinetics of the process. PZ is considered an activator or promoter for MDEA, but the mechanism of this synergy has still not been clearly demonstrated. The aim of this study is an attempt to understand how PZ and MDEA can interact by experimentally analyzing this beneficial mutual effect and by explaining it with the help of a suitable yet not complex model. We believe that the involved chemistry is not more complex than that reported in Part I for the single reagents. According to our findings, it is MDEA that enhances the action of PZ, as opposed to what many authors claim. Moreover, our results seem to rule out the existence of any PZ shuttle effect.     

Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications

The successful clinical application of bone tissue engineering requires customized implants based on the receiver’s bone anatomy and defect characteristics. Three-dimensional (3D) printing in small animal orthopedics has recently emerged as a valuable approach in fabricating individualized implants for receiver-specific needs. In veterinary medicine, because of the wide range of dimensions and anatomical variances, receiver-specific diagnosis and therapy are even more critical. The ability to generate 3D anatomical models and customize orthopedic instruments, implants, and scaffolds are advantages of 3D printing in small animal orthopedics. Furthermore, this technology provides veterinary medicine with a powerful tool that improves performance, precision, and cost-effectiveness. Nonetheless, the individualized 3D-printed implants have benefited several complex orthopedic procedures in small animals, including joint replacement surgeries, critical size bone defects, tibial tuberosity advancement, patellar groove replacement, limb-sparing surgeries, and other complex orthopedic procedures. The main purpose of this review is to discuss the application of 3D printing in small animal orthopedics based on already published papers as well as the techniques and materials used to fabricate 3D-printed objects. Finally, the advantages, current limitations, and future directions of 3D printing in small animal orthopedics have been addressed.     

Validation of a Cleanroom Compliant Sonication-Based Decellularization Technique: A New Concept in Nerve Allograft Production

Defects of the peripheral nervous system are extremely frequent in trauma and surgeries and have high socioeconomic costs. If the direct suture of a lesion is not possible, i.e., nerve gap > 2 cm, it is necessary to use grafts. While the gold standard is the autograft, it has disadvantages related to its harvesting, with an inevitable functional deficit and further morbidity. An alternative to autografting is represented by the acellular nerve allograft (ANA), which avoids disadvantages of autograft harvesting and fresh allograft rejection. In this research, the authors intend to transfer to human nerves a novel technique, previously implemented in animal models, to decellularize nerves. The new method is based on soaking the nerve tissues in decellularizing solutions while associating ultrasounds and freeze–thaw cycles. It is performed without interrupting the sterility chain, so that the new graft may not require post-production γ-ray irradiation, which is suspected to affect the structural and functional quality of tissues. The new method is rapid, safe, and inexpensive if compared with available commercial ANAs. Histology and immunohistochemistry have been adopted to evaluate the new decellularized nerves. The study shows that the new method can be applied to human nerve samples, obtaining similar, and, sometimes better, results compared with the chosen control method, the Hudson technique.