A smartphone-based fall detection system

Falls are a major cause of injuries and hospital admissions among elderly people. Thus, the caregiving process and the quality of life of older adults can be improved by adopting systems for the automatic detection of falls. This paper presents a smartphone-based fall detection system that monitors the movements of patients, recognizes a fall, and automatically sends a request for help to the caregivers. To reduce the problem of false alarms, the system includes novel techniques for the recognition of those activities of daily living that could be erroneously mis-detected as falls (such as sitting on a sofa or lying on a bed). To limit the intrusiveness of the system, a small external sensing unit can also be used for the acquisition of movement data.     

Molecularly imprinted polymers by phase inversion technique for the selective recognition of saccharides of biomedical interest in aqueous solutions

The purpose of this work was the preparation and characterization of polymeric membranes for the selective recognition of saccharides using molecular imprinting technology associated with phase inversion. A system able to bind saccharides with high selectivity is particularly important in the pharmaceutical sector, since some of these compounds are constituents of molecules which can exert serious toxic effects even at very low concentrations. Two polymeric matrices were prepared using poly(ethylene‐co‐vinyl alcohol) copolymers, with an ethylene molar content of 32% and 44%, and were imprinted with two different saccharide molecules: maltose and 2‐keto‐3‐deoxy‐d ‐manno‐octulosonate (KDO). Matrices imprinted against maltose and KDO showed an easy template extraction, high binding capability and satisfactory selectivity, particularly for the matrix with an ethylene molar content of 44%. © 2017 Society of Chemical Industry     

High efficiency process for the production of pure oxygen based on solid oxide fuel cell–solid oxide electrolyzer technology

This paper presents a novel system for production of pure oxygen based on the integration of a solid oxide fuel cell (SOFC) and a solid oxide electrolyzer (SOEC). In the proposed arrangement, the SOFC provides electricity, heat and H₂O in vapour phase to the SOEC which carries out the inverse reactions of the SOFC, that is the separation of H₂O into H₂ (used as a fuel for the SOFC) and O₂ (representing the yield of the system). Simulations carried out in different operating conditions show that when the integrated SOFC–SOEC device runs at low current densities (less than 1000 A m⁻²), pure oxygen can be generated with an electric consumption comparable to mid-size cryogenic air separation units, and significantly lower than small scale systems based on the PSA technology.     

Morphology modulation of gas‐foamed,micrometric, hollow polystyrene particles

In this article, we reports the effects of the processing conditions on the morphological and hollow attributes of polystyrene micrometric hollow particles produced by the use of a recently developed technique based on the gas foaming of spherical, dense particles. By modulating the foaming temperature and saturation pressure, we produced hollow particles with different attributes in terms of hollow dimensions, eccentricity, and open–close features. The results from these small systems were compared, and we found agreement with what is typically observed in bulk polymeric foaming, for example, an increase in the foaming efficiency with saturation pressure and the nonmonotonic effect of temperature. Furthermore, we observed an increase in the hollow number when using nucleating agents with respect to the neat polymer and when using nitrogen with respect to carbon dioxide as the blowing agent. The effects of particle manipulation before foaming to achieve hollow elongated or distorted particles are also reported. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44236.     

Porous,Sintered Glass‐Ceramics from Inorganic Polymers Based on Fayalite Slag

The present paper deals with the synthesis of porous, sintered glass‐ceramics obtained at temperatures below 1150°C, originating from inorganic polymers based on fayalite slag. Firing led to the evaporation of water, dehydroxylation, and oxidation of Fe²⁺ above 345°C. For heating >700°C, the Si–O stretching band shifted from the 1160 and 750 cm^?1 to the 1255 and 830 cm^?1 region, due to a structural reorganization of the amorphous phase, whereas Fe–O bands appeared at 550 cm^?1. The final microstructure consisted predominantly of an amorphous phase, hematite, and franklinite. The open porosity and compressive strength decreased and increased, respectively, as the firing temperature increased. The final values suggest properties comparable to that of structural lightweight concrete, still, the materials synthesized herein, are lighter, and made primarily from secondary resources.     

Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds

The direct ink writing of an ink composed of a preceramic polymer and fillers was used to produce hardystonite (Ca₂ZnSi₂O₇) bioceramic scaffolds. Suitable formulations were developed for the extrusion of fine filaments (350 μm diameter) through a nozzle. The preceramic polymer was employed with the double purpose of contributing to the rheology of the ink by increasing its viscosity and of forming the hardystonite phase upon heat treatment by reacting with the fillers. A control of the rheology is essential when spanning features have to be produced, and therefore the main rheological characteristics of the inks were measured (flow curves, dynamic oscillation tests, viscosity recovery tests) and compared to models reported in the literature. Highly porous scaffolds (up to 80% total porosity) were produced and heat treated in air or in nitrogen atmosphere. The influence of the heat‐treatment atmosphere on the morphology, crystalline phase assemblage, and compressive strength of the scaffolds was investigated.     

Color‐Coded Super‐Resolution Small‐Molecule Imaging

Although the development of super‐resolution microscopy dates back to 1994, its applications have been primarily focused on visualizing cellular structures and targets, including proteins, DNA and sugars. We now report on a system that allows both monitoring of the localization of exogenous small molecules in live cells at low resolution and subsequent super‐resolution imaging by using stochastic optical reconstruction microscopy (STORM) on fixed cells. This represents a powerful new tool to understand the dynamics of subcellular trafficking associated with the mode and mechanism of action of exogenous small molecules.