Immunochemical or fluorescent labeling of vesicular subcellular fractions for microscopy imaging

We describe a procedure for the labeling of membranous vesicular purified subcellular fractions, to image them, typically by confocal laser scanning microscopy. Being intracellular organelles, these fractions, once purified cannot be attached to glass slides as for cells. Fractions are labeled “in batch” without prior embedding or freezing. Each labeling step performed by passages of resuspension/centrifugation is followed by washings. Then samples are dispersed on the glass slides. Mammalian retinal rod outer segment disks, intact brain stem myelin vesicles, and brain synaptosomes were chosen, as these subcellular fractions can be purified by well established procedures. These fractions were immunolabeled with specific antibodies. Moreover, by the earlier procedure, we show that the mitochondrial vital membrane potential probe MitoTracker Deep Red 633 stains myelin vesicles and rod disks before fixation, consistently with our previous reports of a respiring capacity of these membranes. Therefore, the technique seems adequate to become an instrument to study the structure and the function of these and other subcellular fractions. Microsc. Res. Tech. 73:1086–1090, 2010. © 2010 Wiley‐Liss, Inc.     

热湿存储环境下须状晶体的生长机理与影响因素

纯哑锡表面的晶须特性已经成为IC封装中无铅焊接工艺实施的主要影响因素之一。由于其它替代方法,例如预先在引脚上镀Ni/Pd/Au层,会导致成本无法预估以及可靠性下降等问题,因此,目前的关注点是进一步减少纯锡表面须状晶体的生长。     

Reduced Impact of Induced Gate Noise on Inductively Degenerated LNAs in Deep Submicron CMOS Technologies

Designers of radio-frequency inductively-degenerated CMOS low-noise-amplifiers have usually not followed the guidelines for achieving minimum noise figure. Nonetheless, state-of-the-art implementations display noise figure values very close to the theoretical minimum. In this paper, we point out that this is due to the effect of the parasitic overlap capacitances in the MOS device. In particular, we show that overlap capacitances lead to a significant induced-gate-noise reduction, especially when deep sub-micron CMOS processes are used.Paolo Rossi was born in Milan, Italy, in 1975. He received the Laurea degree (summa cum laude) in electrical engineering from the University of Pavia, Pavia, Italy, in 2000, where he is currently working toward the Ph.D. degree. His research interests are in the field of analog integrated circuits for wireless transceivers in CMOS and BiCMOS technology, with particular focus on the analysis and design of LNA and mixer for multi-standard applications.Francesco Svelto received the Laurea and Ph.D. degrees in electrical engineering from the University of Pavia, Pavia, Italy, in 1991 and 1995, respectively. From 1996 to 1997, he held a grant from STMicroelectronics to design CMOS RF circuits. In 1997, he was appointed Assistant Professor at the University of Bergamo, Italy, and in 2000, he joined the University of Pavia, where he is an Associate Professor. His current research interests are in the field of RF design and high-frequency integrated circuits for telecommunications. Dr. Svelto has been a member of the technical program committee of the IEEE Custom Integrated Circuits Conference since 2000 and the Bipolar/BiCMOS Circuits and Technology Meeting (BCTM) since 2003, and the European Solid State Circuits Conference in 2002. He served as Guest Editor of the March 2003 special issue of the IEEE Journal of Solid-State Circuits, of which he is currently an Associate Editor.Andrea Mazzanti was born in Modena (Italy) in 1976. He received the Laurea degree (summa cum Laude) in Electrical Engineering from the University of Modena and Reggio Emilia, Modena, Italy in 2001. Since 2001 he is pursuing his PhD in Electrical Engineering at University of Modena and Reggio Emilia, Italy. His major research interest are modelling of microwave semiconductor devices and design of CMOS RF integrated circuits, with particular focus on low noise oscillators and analog frequency dividers. During the summer of 2003 he was with Agere Systems, Allentown, PA as an internship student, working on the design of an highly integrated CMOS FM transmitter.Pietro Andreani received the M.S.E.E. from the University of Pisa, Italy, in 1988. He joined the Dept. of Applied Electronics, Lund University, Sweden, in 1990, where he contributed to the development of software tools for digital ASIC design. After working at the Dept. of Applied Electronics, University of Pisa, as a CMOS IC designer during 1994, he rejoined the Dept. of Applied Electronics in Lund as an Associate Professor, where he was responsible for the analog IC course package between 1995 and 2001, and where he received the Ph.D. degree in 1999. He is currently a Professor at the Center for Physical Electronics, ØrstedDTU, Technical University of Denmark, Kgs. Lyngby, Denmark, with analog/RF CMOS IC design as main research field.     

“会跳”的空爆手榴弹

<正>德国的RWM公司正在完成为瑞典研制取代目前手榴弹的新型空爆手榴弹的工作。2010年2月,瑞典国防装备管理局将一项研制、鉴定和批量生产该手榴弹的合同授予RWM公司。鉴定工作预计2011年3月进行,首批交付工作预计2011年底     

Transmission power requirements for novel ZigBee implants in the gastrointestinal tract

In this paper, a novel multinode wireless monitoring platform, based on ZigBee communication standard, is presented and tested in vivo. The transmission power levels needed to establish a reliable connection from the different gastrointestinal districts are reported and compared with safety levels from international guidelines. These findings can be useful to evaluate the effectiveness of a commercial and standardized approach to implantable and miniaturized monitoring of physiological parameters.     

Fabrication of a Macroporous Microwell Array for Surface‐Enhanced Raman Scattering

Here, a colloidal templating procedure for generating high‐density arrays of gold macroporous microwells, which act as discrete sites for surface‐enhanced Raman scattering (SERS), is reported. Development of such a novel array with discrete macroporous sites requires multiple fabrication steps. First, selective wet‐chemical etching of the distal face of a coherent optical fiber bundle produces a microwell array. The microwells are then selectively filled with a macroporous structure by electroless template synthesis using self‐assembled nanospheres. The fabricated arrays are structured at both the micrometer and nanometer scale on etched imaging bundles. Confocal Raman microscopy is used to detect a benzenethiol monolayer adsorbed on the macroporous gold and to map the spatial distribution of the SERS signal. The Raman enhancement factor of the modified wells is investigated and an average enhancement factor of 4 × 10⁴ is measured. This demonstrates that such nanostructured wells can enhance the local electromagnetic field and lead to a platform of ordered SERS‐active micrometer‐sized spots defined by the initial shape of the etched optical fibers. Since the fabrication steps keep the initial architecture of the optical fiber bundle, such ordered SERS‐active platforms fabricated onto an imaging waveguide open new applications in remote SERS imaging, plasmonic devices, and integrated electro‐optical sensor arrays.     

A thermal monitoring sheet with low influence from adjacent waterbolus for tissue surface thermometry during clinical hyperthermia

This paper presents a complete thermal analysis of a novel conformal surface thermometer design with directional sensitivity for real-time temperature monitoring during hyperthermia treatments of large superficial cancer. The thermal monitoring sheet (TMS) discussed in this paper consists of a 2-D array of fiberoptic sensors embedded between two layers of flexible, low-loss, and thermally conductive printed circuit board (PCB) film. Heat transfer across all interfaces from the tissue surface through multiple layers of insulating dielectrics surrounding the small buried temperature sensor and into an adjacent temperature-regulated water coupling bolus was studied using 3-D thermal simulation software. Theoretical analyses were carried out to identify the most effective differential TMS probe configuration possible with commercially available flexible PCB materials and to compare their thermal responses with omnidirectional probes commonly used in clinical hyperthermia. A TMS sensor design that employs 0.0508-mm Kapton MTB and 0.2032-mm Kapton HN flexible polyimide films is proposed for tissue surface thermometry with low influence from the adjacent waterbolus. Comparison of the thermal simulations with clinical probes indicates the new differential TMS probe design to outperform in terms of both transient response and steady-state accuracy in selectively reading the tissue surface temperature, while decreasing the overall thermal barrier of the probe between the coupling waterbolus and tissue surface.      

Discovering Homophily in Online Social Networks

Mobile Networks and Applications - During the last ten years, Online Social Networks (OSNs) have increased their popularity by becoming part of the real life of users. Despite their tremendous...