Large-Eddy Simulation of High Reynolds Number Turbulent Flow Past a Square Cylinder

Flow past a square cylinder at a Reynolds number of 21,400 has been studied numerically using the large-eddy simulation technique. A dynamic subgrid-scale stress model has been used for the small scales of turbulence. The time- and span-averaged axial and transverse velocities in the downstream of the cylinder are in good agreement with the experimental results. The distribution of turbulent normal and shear stresses is also well predicted. The coherent and incoherent components of turbulent fluctuations at some specified phases have been separated and their relative magnitudes downstream of the cylinder have been compared. The comparison shows more coherence in the near wake than the far wake, while the coherent and incoherent components are of comparable magnitude in the far wake. The far wake shows irregular phase-averaged structures.     

A method for motion compensation of a moving nematode Caenorhabditis elegans and its application to frequency analysis of pharyngeal pulsation

A new sequential image processing method for motion compensation of a moving object with stringy shape has been developed for estimating the pharyngeal pulsation of the nematode Caenorhabditis elegans under several environmental conditions. The method is based on the pixel data transfer on a new image frame while changing the boundary shape and the position but preserving the conformation of the inner structure of an object. All digitized image frames of C. elegans were first converted to motion-compensated images to arrange the pulsation site in the same region of the every transformed frame. The pulsation site was then automatically detected by determining the pixels where the temporal brightness variation was much larger than that of the other pixels. Finally, the pulsation frequency was determined by the Fourier analysis. The validity of our method has been confirmed by analyzing various test data, and the method has been applied for detecting the pharyngeal pulsation frequencies of C. elegans on some environmental conditions, i.e. feed bacteria-free/rich, doping of nerve inactivating ethyl-alcohol and nerve stimulant neurochemical substance of serotonin. The motion compensation method automatically provided reasonable pulsation frequencies which were found to be comparable to those obtained by manual counting. Thus the method is useful for systematic investigations on the variation of pharyngeal pulsation associated with the activity change of the nervous system in environments.     

Effect of ash on maximum thickness of plastic layer of coals

A study of the effect of ash yield on the maximum thickness of the plastic layer (MTPL) of some coking coals (as measured by the Sapozhnikov plastometer) has revealed that with an increase in the former the latter in general decre?es. A rectilinear relation approximately exists between the ash percentage (dry basis) and log MTPL values of coals. For the samples studied, a multiple correlation incorporating the rank factor was found to be unnecessary. Higher Fe₂O₃ and SO₃ contents from the coal were found to be associated with higher MTPL values.     

An Experimental Investigation on the Fabrication and Testing of Mechanical Properties of Aluminum-Silica Gel Metal Matrix Composite

A metal matrix composite (MMC) was fabricated using Al as the base metal which was reinforced by a ceramic material silica gel. This article shows detail fabrication stages in the production of MMC. The properties were considered with regard to the saturation point of the reinforcement of silica gel into the metal matrix of Al-Si alloy which was found out experimentally. Here the improvement of the mechanical properties of Al-silica gel MMC composite were studied with respect to that of pure Al-Si alloy. Different tests were conducted to show the results. Conventional ingot metallurgy with infiltration technique using vortex method had been employed in the fabrication process. The test results show that there are improvements by 17.14%, 13.46%, 11.48%, and 18.18% on compressive strength, impact strength, Brinell hardness value, and Rockwell hardness no respectively of Al-silica gel MMC over the pure Al-Si alloy.     

A Probabilistic and Decision Attitude Aggregation Operator for Intuitionistic Fuzzy Environment

In this paper, a new operator for aggregation of uncertain information under intuitionistic fuzzy environment is proposed. A novel approach is proposed for the selection of best alternative action in the face of the imprecise probabilities and the complex attitudinal character of the decision makers (DMs). This approach is distinguished with its capacity to accommodate the linguistic specification of probabilities as provided by human experts directly without the need to determine the fuzzy membership grades. The focus is to compute the net payoff for each alternative in the face of uncertain states of nature and DM's attitude. The proposed operator and the approach are illustrated through two real case studies.     

The cluster scanning system

Users with severe physical impairment often use computers with one or two switches using a scanning system. Scanning is a technique of successively highlighting portions of screen. This paper presents a new scanning system that works through clustering screen objects. The system is initially calibrated through simulation and later validated through a user trial. Results show that it outperforms existing block scanning systems.     

Reactive extrusion of zein with glyoxal

Cross‐linked zein has been produced using glyoxal (GLY) as the cross‐linking reagent via reactive extrusion for the first time in a twin screw extruder using dilute sodium hydroxide as catalyst. Tri(ethylene glycol) was used as a plasticizer for various items. The extrudate was then ground and processed using either compression or injection molding. At the highest level of GLY (6%), tri(ethylene glycol) was used at 10% as a plasticizer to allow further processing to take place. With this formulation, samples could be obtained from the injection mold, however, the samples did not hold their molded shape due to the elasticity of the sample at the mold temperature. When lower levels of GLY were used, injection molded sample bars of similar quality to control were obtained. The physical properties of these samples were similar to control. At GLY levels of 1.75% and higher, the samples were resistant to dissolution by acetic acid. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009