Fault tolerance in multiprocessor systems

Multiprocessor systems which afford a high degree of parallelism are used in a variety of applications. The extremely stringent reliability requirement has made the provision of fault-tolerance an important aspect in the design of such systems. This paper presents a review of the various approaches towards tolerating hardware faults in multiprocessor systems. It emphasizes the basic concepts of fault tolerant design and the various problems to be taken care of by the designer. An indepth survey of the various models, techniques and methods for fault diagnosis is given. Further, we consider the strategies for fault-tolerance in specialized multiprocessor architectures which have the ability of dynamic reconfiguration and are suited tovlsi implementation. An analysis of the state-of-the-art is given which points out the major aspects of fault-tolerance in such architectures.     

Design of an Ultra-Compact and Highly-Sensitive Temperature Sensor Using Photonic Crystal Based Single Micro-Ring Resonator and Cascaded Micro-Ring Resonator

Silicon - In the present report, a photonic crystal based micro-ring resonator (MRR) structure is proposed which is very compact in size and has very fast response and is employed for temperature...     

Elucidation of the Clustered Nano-Architecture of Radiation-Induced DNA Damage Sites and Surrounding Chromatin in Cancer Cells: A Single Molecule Localization Microscopy Approach

In cancer therapy, the application of (fractionated) harsh radiation treatment is state of the art for many types of tumors. However, ionizing radiation is a “double-edged sword”—it can kill the tumor but can also promote the selection of radioresistant tumor cell clones or even initiate carcinogenesis in the normal irradiated tissue. Individualized radiotherapy would reduce these risks and boost the treatment, but its development requires a deep understanding of DNA damage and repair processes and the corresponding control mechanisms. DNA double strand breaks (DSBs) and their repair play a critical role in the cellular response to radiation. In previous years, it has become apparent that, beyond genetic and epigenetic determinants, the structural aspects of damaged chromatin (i.e., not only of DSBs themselves but also of the whole damage-surrounding chromatin domains) form another layer of complex DSB regulation. In the present article, we summarize the application of super-resolution single molecule localization microscopy (SMLM) for investigations of these structural aspects with emphasis on the relationship between the nano-architecture of radiation-induced repair foci (IRIFs), represented here by γH2AX foci, and their chromatin environment. Using irradiated HeLa cell cultures as an example, we show repair-dependent rearrangements of damaged chromatin and analyze the architecture of γH2AX repair clusters according to topological similarities. Although HeLa cells are known to have highly aberrant genomes, the topological similarity of γH2AX was high, indicating a functional, presumptively genome type-independent relevance of structural aspects in DSB repair. Remarkably, nano-scaled chromatin rearrangements during repair depended both on the chromatin domain type and the treatment. Based on these results, we demonstrate how the nano-architecture and topology of IRIFs and chromatin can be determined, point to the methodological relevance of SMLM, and discuss the consequences of the observed phenomena for the DSB repair network regulation or, for instance, radiation treatment outcomes.     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

Absorption of carbon dioxide in alkanolamines in the presence of fine activated carbon particles

The rates of absorption of CO₂ into water and 0.1 kmol/m³ aqueous solutions of MEA, DEA and AMP were measured in a stirred cell with a flat gas-liquid interface in the presence of fine activated carbon particles. Experiments showed that the rates of absorption increased significantly with increases in the loading of activated carbon up to about 6 kg/m³ and thereafter remained constant.     

Prediction of dispersed phase holdup in a modified multi‐stage bubble column scrubber

This paper reports on the experimental investigation carried out to evaluate fractional dispersed phase holdup for a gas‐liquid mixture in a modified multi‐stage bubble column (with contraction and expansion disks), which has been conceived, designed and fabricated as a wet scrubber for control of air pollution; in addition it has versatile use as a gas‐liquid contactor in chemical process industries. A correlation developed for predicting fractional dispersed phase holdup has been found to be encouraging and highly significant from statistical analysis.     

Multimodal Intelligent Eye-Gaze Tracking System

This article presents a series of user studies to develop a new eye-gaze tracking–based pointing system. We developed a new target prediction model that works for different input modalities and combined the eye-gaze tracking–based pointing with a joystick controller that can reduce pointing and selection times. The system finds important applications in cockpit of combat aircraft and for computer novice users. User studies confirmed that users can perform significantly faster using this new eye-gaze tracking–based system for both military and everyday computing tasks compared to existing input devices. As part of the study it was also found that the amplitude of maximum power component obtained through Fourier Transform of pupil signal significantly correlates with selection times and perceived cognitive load of users in terms of Task Load Index scores.     

Neutrosophic classifier: An extension of fuzzy classifer

Fuzzy classification has become of great interest because of its ability to utilize simple linguistically interpretable rules and has overcome the limitations of symbolic or crisp rule based classifiers. This paper introduces an extension to fuzzy classifier: a neutrosophic classifier, which would utilize neutrosophic logic for its working. Neutrosophic logic is a generalized logic that is capable of effectively handling indeterminacy, stochasticity acquisition errors that fuzzy logic cannot handle. The proposed neutrosophic classifier employs neutrosophic logic for its working and is an extension of commonly used fuzzy classifier. It is compared with the commonly used fuzzy classifiers on the following parameters: nature of membership functions, number of rules and indeterminacy in the results generated. It is proved in the paper that extended fuzzy classifier: neutrosophic classifier; optimizes the said parameters in comparison to the fuzzy counterpart. Finally the paper is concluded with justifying that neutrosophic logic though in its nascent stage still holds the potential to be experimented for further exploration in different domains.