Effect of H2O2 addition mode on enzymatic removal of phenol from wastewater in the presence of polyethylene glycol

The effect of batch and semi-batch additions of the stoichiometric amount of H₂O₂ on enzymatic removal of phenol has been studied over the phenol concentration range of 1-10 mmol/L. It is found that the ratio between the maximum H₂O₂ concentration during the reaction and the initial horseradish peroxidase concentration ((H₂O₂)_max/(HRP)_o) controls the rate of phenol removal by horseradish peroxidase in the presence of the additive, polyethylene glycol. An optimum range of this ratio is determined to be between 10 and 25 μmol/U. Empirical models are proposed to predict the values of (H₂O₂)_max/(HRP)_o required to treat given phenol concentrations under different modes for adding H₂O₂.     

Hardness of a surface containing uniformly spaced pyramidal asperities

Pyramidal asperities of different apical angle were machined on a flat copper surface. Hardness was estimated from the load–displacement graphs obtained by pressing a spherical rigid indenter onto the asperities. The variation of hardness with apical angle and pitch was recorded with a view to contributing to the development of a general framework for relating measured hardness to the surface roughness. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fault tolerance in multiprocessor systems

Multiprocessor systems which afford a high degree of parallelism are used in a variety of applications. The extremely stringent reliability requirement has made the provision of fault-tolerance an important aspect in the design of such systems. This paper presents a review of the various approaches towards tolerating hardware faults in multiprocessor systems. It emphasizes the basic concepts of fault tolerant design and the various problems to be taken care of by the designer. An indepth survey of the various models, techniques and methods for fault diagnosis is given. Further, we consider the strategies for fault-tolerance in specialized multiprocessor architectures which have the ability of dynamic reconfiguration and are suited tovlsi implementation. An analysis of the state-of-the-art is given which points out the major aspects of fault-tolerance in such architectures.     

Noise suppression characteristics of InP-based monolithically integrated guided wave balanced photodiodes

Measurements were made of the noise suppression and signal enhancement properties of dual In/sub 0.53/Ga/sub 0.47/As-InP metal-semiconductor-metal (MSM) photodiodes integrated with a leaky mode In/sub 0.52/Al/sub 0.48/As waveguide directional coupler, and an electro-optic phase shifter. The experiments were done with a 1.3- mu m laser as the local oscillator. A noise suppression of 11 dB and signal enhancement of 1.3 dB were recorded for the MSM photodiodes.<>     

Design and performance study of phase‐locked loop using fractional‐order loop filter

The present work reports the realization of an analog fractional‐order phase‐locked loop (FPLL) using a fractional capacitor. The expressions for bandwidth, capture range, and lock range of the FPLL have been derived analytically and then compared with the experimental observations using LM565 IC. It has been observed that bandwidth and capture range can be extended by using FPLL. It has also been found that FPLL can provide faster response and lower phase error at the time of switching compared to its integer‐order counterpart. Copyright © 2014 John Wiley & Sons, Ltd.     

Conducting composites of poly(N‐vinylcarbazole), polypyrrole,and polyaniline with 13X‐zeolite

N‐vinylcarbazole (NVC) was polymerized by 13X zeolite alone in melt (65°C) or in toluene (110°C) and a poly(N‐vinylcarbazole) (PNVC)‐13X composite was isolated. Composites of polypyrrole (PPY) and polyaniline(PANI) with 13X zeolite were prepared via polymerization of the respective monomers in the presence of dispersion of 13X zeolite in water (CuCl₂ oxidant) and in CHCl₃ (FeCl₃ oxidant) at an ambient temperature. The composites were characterized by Fourier transform infrared analyses. Scanning electron microscopic analyses of various composites indicated the formation of lumpy aggregates of irregular sizes distinct from the morphology of unmodified 13X zeolite. X‐ray diffraction analysis revealed some typical differences between the various composites, depending upon the nature of the polymer incorporated. Thermogravimetric analyses revealed the stability order as: 13X‐zeolite > polymer‐13X‐zeolite > polymer. PNVC‐13X composite was essentially a nonconductor, while PPY‐13X and PANI‐13X composites showed direct current conductivity in the order of 10^?4 S/cm in either system. However, the conductivity of PNVC‐ 13X composite could be improved to 10^?5 and 10^?6 S/cm by loading PPY and PANI, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 913–921, 2006     

Phase Transformation Introduced by Mechanical and Chemical Surface Preparations of Tetragonal Zirconia Polycrystals

Cutting of Y₂O₃-doped TZP rods by a low-speed diamond saw introduces an unidentified, metastable phase X (x -ZrO₂) coexisting with the tetragonal ( t -ZrO₂) and the monoclinic ( m -ZrO₂) phases initially present in the sample. Further mechanical deformation of the cut surface by indentation or polishing sustains the x -ZrO₂. Chemical etching removes the x -ZrO₂ and increases the m -ZrO₂content.     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Design and analysis of an efficient QoS improvement policy in cloud computing

Cloud computing offers the proficiency to use computing and storage resources on a metered basis and reduces the investments in Information Technology domain. This paper highlights a major research issue, i.e., providing good quality of service (QoS) to the cloud users. The QoS is associated with several parameters such as completion time, response time, turnaround time (TAT), waiting time (WT), bandwidth. A new cloudlet scheduling algorithm—improved round robin cloudlet scheduling algorithm—has been proposed which improves the TAT, WT and number of context switching. It enhances the resource utilization. The experimental results are obtained by CloudSim toolkit extending few base classes and compared by classical round robin algorithm.