Morphology of Cereal Starches Grafted with Polyacrylonitrile

Morphological aspects of six cereal starches and their graft copolymers with polyacrylonitriles (PAN) prepared from granular as well as geletinized starches are reported. Scanning electron microscopy showed that grafting is not uniform on the surface but has also occurred in the interior of the granules. The graft copolymers prepared from gelatinized starches maintained the individuality but no resemblance with original shape of the granules.     

Acrylic Homo- and Co-polymers Based on 2, 4-dichlorophenyl Methacrylate and 8-quinolinyl Methacrylate

The monomer 2, 4-dichlorophenyl methacrylate (2,4-DMA) was synthesized from 2, 4-dichlorophenol and characterized by conventional methods. The homopolymers of 2,4-dichlorophenyl methacrylate and its copolymers with 8-quinolinyl methacrylate (8-QMA) in different feed ratio were prepared by free radical polymerization using dimethyl formamide (DMF) as a solvent and 2,2-azobis iso butyronitrile (AIBN) as an initiator. The resulting polymers were characterized by using IR spectroscopy. Reactivity ratios of monomer were evaluated using UV-spectroscopy. Average molecular weights and polydispersity were determined by gel permeation chromatography (GPC). Solution viscosity was also obtained. The thermal analysis was carried out using TGA and DSC. The homo- and co-polymers were also tested for their antimicrobial properties against selected microorganism. The metal ion uptake capacity of synthesized copolymers was estimated by batch equilibration method using different metal ion solution under different experimental conditions. It is observed that due to the presence of pendant ester bound quinoline group, the copolymers are capable of adsorbing cations from their aqueous solution.     

Morphological, mechanical and gas-transport characteristics of crosslinked poly(propylene glycol): homopolymers, nanocomposites and blends

Linear polyethers possess unusually high CO₂ solubility and, hence, selectivity due to the presence of accessible ether linkages that can interact with the quadrupolar moment of CO₂ molecules. In this work, membranes derived from crosslinked poly(propylene glycol) diacrylate (PPGda) oligomers differing in molecular weight (M), as well as PPGda nanocomposites containing either an organically-modified montmorillonite clay or a methacrylate-terminated fumed silica are investigated and compared with highly CO₂-selective poly(ethylene glycol) diacrylate (PEGda) homopolymer and nanocomposite membranes previously reported. The rheological and permeation properties of PPGda depend sensitively on M, with the elastic modulus decreasing, but CO₂ permeability and CO₂/H₂ selectivity increasing, with increasing M. Incorporation of either nanofiller into PPGda enhances the elastic modulus and reduces the gas permeability in the resultant nanocomposites without strongly affecting CO₂/H₂ selectivity. Blending PPGda and PEGda prior to chemical crosslinking yields binary membranes that exhibit intermediate gas-transport properties accurately described by a linear rule of mixtures.     

Parallel selection of antibody libraries on phage and yeast surfaces via a cross-species display

We created a cross-species display system that allows the display of the same antibody libraries on both prokaryotic phage and eukaryotic yeast without the need for molecular cloning. Using this cross-display system, a large, diverse library can be constructed once and subsequently used for display and selection in both phage and yeast systems. In this article, we performed the parallel phage and yeast selection of an antibody maturation library using this cross-display platform. This parallel selection allowed us to isolate more unique hits than single-species selection, with 162 unique clones from phage and 107 unique clones from yeast. In addition, we were able to shuttle yeast hits back to Escherichia coli cells for affinity characterization at a higher throughput.     

Aging effects of nanoscale ceria in ceria–platinum composite electrodes for direct alcohol electro-oxidation

Nanocrystalline Pt/CeO₂ composite electrodes were fabricated to study the electrochemical oxidation of methanol and ethanol. The performance of the electrodes was tested as the ceria solutions aged over time. It was observed that the performance oscillated with time, suggesting that the catalytic behavior towards alcohol oxidation was greatly dependent on the aging of the particles. These results point to a great dependence of the catalytic effect on the redox state of the ceria particles.     

Synthesis and properties of chelate polymers of VO(II), Mn(II), Zn(II), Fe(III), and Cr(III) with schiff base of 5,5′-methylene bis-salicylaldehyde with aniline

Polychelates of VO(II), Mn(II), Zn(II), Fe(III), and Cr(III) were prepared from Schiff base of 5,5′-methylene bis-salicyladehyde with aniline. All the chelate polymers are amorphous and insoluble in common organic solvents. They have very little solubility in DMF. The first three polychelates are found to be noncharged chelate polymers while the last two polychelates are found to be ionic from their conductivities in DMF. Their probable structures were determined from reflectance electronic spectral and magnetic measurements in conjunction with infrared measurements. The thermal stability, order of reaction and activation energy for all the polychelates were determined from their thermogravimetric analyses.     

Workstation-based logic animation and microarchitecture emulationfor teaching introduction to computer engineering

The authors describe two software tools used for teaching logic design and analysis and basic computer organization in the introductory course on computer engineering at the authors' department. The first computer-aided instruction tool described is a schematic capture, simulation, and logic animation package targeted for teaching combinational and sequential logic concepts. The tool incorporates logic animation capability rather than waveform displays, which allows students to view and control logic values propagating throughout the entire network. The second tool teaches computer organization, including microprogramming concepts, by means of the graphical display of an instructional microprocessor architecture in which users are allowed to view and control internal registers, memory locations, and microcontrol store. Both of the computer-aided instructional tools run on UNIX workstations, with graphics displays, local hard-disk mass storage, and mouse input     

Strength improvements in toughened epoxy composites using surface treated GnPs

Nanographitic materials are gaining enormous interest as a new class of reinforcement for nanocomposites, promising revolutionary electrical, thermal, and mechanical properties. However, the progress has been quite limited especially in terms of mechanical properties. Here we report a significant leap, >2× increases in tensile strength and modulus of an epoxy composite using surface treated graphite nanoplatelets (GnPs). This corroborated by increases in Tgs as well as the presence of oxygen‐functionalized groups verified by XPS, suggest improved distribution and chemical interaction at the filler‐to‐matrix interface. Toughness values also showed increases with concentration, without compromising the strength or failure strain. However, if solvent levels during degassing were not reduced sufficiently, negligible contributions to strength and stiffness were observed with GnP loading. Subsequent elevated temperature treatments increased the strength of the composite due to cure enhancement of the matrix material, yet did not provide mechanical enhancements due to the incorporation of the filler. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40802.     

Vertically aligned carbon nanotube‐based composite: Elaboration and monitoring of the nanotubes alignment

We present the different elaboration steps of a composite formed of carbon nanotubes (CNT) carpet embedded in an epoxy polymer. Detailed characterization at each step of the elaboration process is performed. The good alignment of CNT in as‐grown carpets is kept all along the elaboration process of the composite, as it is measured at both macro and microscopic scales by X‐ray scattering. We also ensured by X‐ray fluorescence measurements that the iron‐based catalyst particles used for the synthesis were removed from the carpet after a high temperature post‐annealing treatment. These measurements give valuable information for further applications involving unidirectional nanotube composites and membranes, where CNT alignment is a key parameter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39730.