A slotted post-wall waveguide array with interdigital structure for 45/spl deg/ linear and dual polarization

This work proposes a dual-polarized planar antenna; two post-wall slotted waveguide arrays with orthogonal 45/spl deg/ linearly-polarized waves interdigitally share the aperture on a single layer substrate. Uniform excitation of the two-dimensional slot array is confirmed by experiment in the 25 GHz band. The isolation between two slot arrays is also investigated in terms of the relative displacement along the radiation waveguide axis in the interdigital structure. The isolation is 33.0 dB when the relative shift of slot position between the two arrays is -0.5/spl lambda//sub g/, while it is only 12.8 dB when there is no shift. The cross-polarization level in the far field is -25.2 dB for a -0.5/spl lambda//sub g/ shift, which is almost equal to that of the isolated single polarization array. It is degraded down to -9.6 dB when there is no shift.     

Highly ordered microstructures of poly(styrene-b-isoprene) block copolymers induced by solution meniscus

Microstructures of hundreds of micron thick poly(styrene-block-isoprene) copolymer films solution-cast in a cylindrical tube with the solvent evaporation controlled were investigated by transmission electron microscope (TEM), small angle X-ray scattering (SAXS) and optical microscope (OM). In a block copolymer with cylindrical polyisoprene microdomains, the orientation of the cylinders was varied along radial direction of the cylindrical tube. Highly aligned hexagonal arrays of in-plane polyisoprene cylinders were formed with their cylindrical axis parallel to the circumference of the tube in the regimes close to the wall edge. In contrast randomly ordered microdomains were observed at the center of the tube. We have also found that the orientation depends on the solvent evaporation rate and an intermediate rate (∼2.3 nL/s) provides the best orientation. In the case of a block copolymer with a bicontinuous double gyroid structure, we obtained a globally ordered microstructure where [111] crystallographic direction was parallel to the circumference of the tube. For both block copolymers, the area of highly ordered arrays of nanoscopic domains is over 1 mm². Development of the orientation was explained by coupling two orthogonal fields: (1) The flow of a solution induced by strong capillary force at a meniscus between the cylindrical tube wall and the block copolymer solution and (2) the solvent evaporation.     

Application of Support Vector Machines in Assessing Conceptual Cost Estimates

Total conceptual cost estimates and the assessment of the quality of these estimates are critical in the early stages of a building construction project. In this study, the support vector machine (SVM) model for assessing the quality of conceptual cost estimates is proposed, and the application of SVM in construction areas is investigated. The results show that the SVM model assessed the quality of conceptual cost estimates slightly more accurately than the discriminant analysis model. This shows that using the SVM has potential in construction areas. In addition, the SVM model can assist clients in their evaluation of the quality of the estimated cost and the probability of exceeding the target cost, and in their decision on whether or not it is necessary to seek a more accurate estimate in the early stages of a project.     

Fast DCT algorithm with fewer multiplication stages

A novel fast DCT scheme with reduced multiplication stages and fewer additions and multiplications is proposed. The proposed algorithm is structured so that most multiplications tend to be performed at the final stage, which reduces the propagation error that could occur in the fixed-point computation. Minimisation of the multiplication stages can further decrease the error     

Ultrasound evaluation of piglet diaphragm function before and after fatigue

Clinically, a noninvasive measure of diaphragm function is needed. The purpose of this study is to determine whether ultrasonography can be used to 1) quantify diaphragm function and 2) identify fatigue in a piglet model. Five piglets were anesthetized with pentobarbital sodium and halothane and studied during the following conditions: 1) baseline (spontaneous breathing); 2) baseline + CO2 [inhaled CO2 to increase arterial PCO2 to 50-60 Torr (6.6-8 kPa)]; 3) fatigue + CO2 (fatigue induced with 30 min of phrenic nerve pacing); and 4) recovery + CO2 (recovery after 1 h of mechanical ventilation). Ultrasound measurements of the posterior diaphragm were made (inspiratory mean velocity) in the transverse plane. Images were obtained from the midline, just inferior to the xiphoid process, and perpendicular to the abdomen. M-mode measures were made of the right posterior hemidiaphragm in the plane just lateral to the inferior vena cava. Abdominal and esophageal pressures were measured and transdiaphragmatic pressure (Pdi) was calculated during spontaneous (Sp) and paced (Pace) breaths. Arterial blood gases were also measured. Pdi(Sp) and Pdi(Pace) during baseline + CO2 were 8 +/- 0.7 and 49 +/- 11 cmH2O, respectively, and decreased to 6 +/- 1.0 and 27 +/- 7 cmH2O, respectively, during fatigue + CO2. Mean inspiratory velocity also decreased from 13 +/- 2 to 8 +/- 1 cm/s during these conditions. All variables returned to baseline during recovery + CO2. Ultrasonography can be used to quantify diaphragm function and identify piglet diaphragm fatigue.     

Development of a monoclonal antibody to 6 beta-hydroxycortisol and its application in an enzyme-linked immunosorbent assay (ELISA) for 6 beta-hydroxycortisol in urine

A novel monoclonal antibody to 6 beta-hydroxycortisol (6 beta-OHC) was generated and incorporated into an antigen-coated indirect enzyme-linked immunosorbent assay (ELISA) using 6 beta-OHC-protein conjugate as the steroid-coating antigen. The monoclonal antibody is specific to 6 beta-OHC and 6 beta-OHC-3-carboxymethyloxime. Cross-reactivity with other structurally related steroids such as cortisol, cortisone, and 6 beta-hydroxycortisone was less than 10%. Two different clones (clone 5C1 and 19F) of the monoclonal anti-6 beta-OHC antibody have been developed, each with slightly different sensitivity and specificity. The sensitivity of the MAb clones was not significantly improved when compared to the rabbit polyclonal antibodies in this study, but still within the accepted detection limit for 6 beta-OHC in both human and laboratory animals. The assay had a detection limit of 200 ng/ml, an intraassay variation of 6.4% and an interassay variation of 7.3%. The application of the anti-6 beta-OHC-MAb-based-ELISA was tested by measuring the urinary output of 6 beta-OHC in human before and after enzyme induction by rifampicin treatment. The mean 24-h urine output of 6 beta-OHC in human subjects was 485 +/- 100 micrograms and 1478 +/- 281 micrograms before and after rifampicin administration, respectively. In conclusion, the monoclonal anti-6 beta-OHC antibody developed in this study has the required specificity and sensitivity as an alternative method for measuring urinary 6 beta-OHC in the detection of enzyme induction or enzyme inhibition of CYP3A in humans and laboratory animals.     

High-dose busulfan, melphalan, thiotepa and peripheral blood stem cell infusion for the treatment of metastatic breast cancer

The purpose of this study was to determine the outcome of patients with metastatic breast cancer treated with high-dose busulfan (Bu), melphalan (Mel) and thiotepa (TT) followed by peripheral blood stem cell (PBSC) infusion. Fifty-one patients with chemotherapy refractory (n = 32) or responsive (n = 19) metastatic breast cancer received Bu (12 mg/kg), Mel (100 mg/m2) and TT (500 mg/m2) followed by PBSC collected after chemotherapy and growth factor (n = 43) or growth factor alone (n = 8). The 100 day treatment-related mortality was 8% including one death from cytomegalovirus pneumonia, one from aspiration pneumonia and two from regimen-related toxicity (RRT). Seven of 28 refractory (25%) and 5/7 (71%) responsive patients with evaluable disease achieved a complete response of all measurable disease or all soft tissue disease with at least improvement in bone lesions (PR*). Fifteen of 51 patients (29%) are alive and progression-free a median of 423 days (range 353-934) after treatment, 5/32 (16%) with refractory disease and 10/19 (53%) with responsive disease. The probabilities of progression-free survival (PFS) at 1.5 years for the patients with refractory (n = 32) and responsive (n = 19) disease were 0.24 and 0.53, respectively. These preliminary data suggest that high-dose Bu/Mel/TT has significant activity in patients with advanced breast cancer and may be superior to some previously published regimens.     

A time-domain approach to transmission network equivalents viaProny analysis for electromagnetic transients analysis

This paper presents a method of obtaining transmission network equivalents from the network's response to a pulse excitation signal. The proposed method is based on modal decomposition representation for the large-scale interconnected system. In this framework we use Prony analysis to identify the network function of the system and to decompose the large system into a parallel combination of simple first-order systems. As a result the network function of the transmission network can be identified easily, and a Thevenin-type of discrete-time filter model can be generated. It can reproduce the driving-point impedance characteristic of the network. Furthermore, the proposed model can be implemented into the EMTP in a direct manner. The simulation results with the full system representation and the developed equivalent system showed a good agreement     

Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers

Microllular plastics are cellular polymers characterized by cell densities greater than 10⁹ cells/cm³ and cells smaller than 10 μm. One of the critical steps in the continuous production of microcellular plastics is the promotion of high cell nucleation rates in a flowing polymer matrix. These high nucleation rates can be achieved by first forming a polymer/gas solution followed by rapidly decreasing the solubility of gas in the polymer. Since, in the processing range of interest, the gas solubility in the polymer decreases as the pressure decreases, a rapid pressure drop element, consisting of a nozzle, has been employed as a continuous microcellular nucleation device. In this paper, the effects of the pressure drop rate on the nucleation of cells and the cell density are discussed. The experimental results indicate that both the magnitude and the cell density are discussed. The experimental results indicate that both the magnitude and the rate of pressure drop play a strong role in microcellular processing. The pressure phenomenon affects the thermodynamic instability induced in the polymer/gas solution and the competition between cell nucleation and growth.