Fracture behavior of glass-cloth-reinforced composites

The fracture behavior of glass-cloth-reinforced composites has been studied. Fracture of these composites proceeds by tensile failure of fibers rather than by the shear failure of the matrix or the interface. Although the spread of damage in these composites is restricted to small distances away from the crack path due to the interweaving of the fibers, this distance is found to be appreciably larger for the samples with smaller initial crack lengths. Characteristic distances associated with the Whitney-Nuismer criteria are, in turn, found to be smaller for these composites than for the angle ply laminates or randomly oriented short-fiber composites reported in literature in which the spread of the damage is much greater. Analysis through the crack growth resistance also supports this correlation with the extent of damage spread and indicates that the critical crack length for these composites may be equal to the best fit value of the characteristic distance of the average stress criterion.     

Structure,properties, and applications of polyacrylonitrile/carbon nanotube (CNT) fibers at low CNT loading

Bi-component, polyacrylonitrile (PAN)/carbon nanotube (CNT) fibers were processed, at different core-sheath area ratios, by gel spinning. A percolated CNT network at 10 wt% CNT in the sheath enhanced electrical conductivity as compared to the neat PAN fiber, while PAN polymer in the core contributed to the good mechanical properties. Fibers with relatively thin sheath allowed overall CNT loading as low as 3.7 wt% to be made with good electrical conductivity, and PAN stabilization by Joule heating was demonstrated. Such fibers with combined good mechanical properties and electrical conductivity can also potentially be used for electrical heating of fabrics, for making smart textiles, and for electromagnetic interference shielding.     

Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines

The increasing industrialization and motorization of the world has led to a steep rise for the demand of petroleum-based fuels. Petroleum-based fuels are obtained from limited reserves. These finite reserves are highly concentrated in certain regions of the world. Therefore, those countries not having these resources are facing energy/foreign exchange crisis, mainly due to the import of crude petroleum. Hence, it is necessary to look for alternative fuels which can be produced from resources available locally within the country such as alcohol, biodiesel, vegetable oils etc. This paper reviews the production, characterization and current statuses of vegetable oil and biodiesel as well as the experimental research work carried out in various countries. This paper touches upon well-to-wheel greenhouse gas emissions, well-to-wheel efficiencies, fuel versatility, infrastructure, availability, economics, engine performance and emissions, effect on wear, lubricating oil etc.     

Vibrational spectra and dissociation of aqueous Na2SiO3 solutions

To facilitate molecular spectroscopic observation of the mysterious transition of dissolved sodium silicate molecules into nanoparticles of desired silica gel and zeolite structures, the IR and Raman spectra of Na₂H₂SiO₄ monomers are studied here in details. It is demonstrated that the 3–0.2 mol/L aqueous solutions of Na₂SiO₃ and Na₂SiO₃ × 9H₂O contain mostly Na₂H₂SiO₄ monomers dissociated about 30%–80%, respectively. In contrast to the common belief the Si–O vibrations of these monomers depend on their dissociation level generating FTIR and Raman bands which are frequently associated with polymer silica structures in the current literature. To stay consistent with the molweight and dissociation measurements, these vibrational assignments are revised in this paper. Some unique and unexpected effects of D₂O used instead of H₂O as solvent are also reported.     

X-ray and thermal studies of the Na-U-Mo-O system

In the Na-U-Mo-O system, five compounds with composition Na₂UMo₂O₁₀, Na₂U₂Mo₂O₁₃, Na₂U₂Mo₃O₁₆, Na₂UMo₄O₁₆ and Na₂U₂Mo₄O₁₉ were prepared by solid state reaction of Na₂MoO₄, UO₃ and MoO₃ in the required stoichiometric ratio. The compounds were characterized by X-ray powder diffraction, infrared and thermal analysis techniques. The XRD data of all the above-mentioned compounds were indexed on the orthorhombic system. All the compounds showed thermal stability up to 600 °C in air and decomposed at 950 °C to form Na₂U₂O₇. Infrared spectra of all the compounds show strong spectral bands in the range 700-950 cm⁻¹ due to tetrahedra and the group. A pseudo-ternary phase diagram of Na₂O-UO₃-MoO₃ was drawn using the quaternary compounds and information available on Na-U-O, Mo-U-O and Na-Mo-O ternary systems. The various phase fields prepared during this work were established by XRD analysis.     

High-performance fully depleted silicon nanowire (diameter /spl les/ 5 nm) gate-all-around CMOS devices

This paper demonstrates gate-all-around (GAA) n- and p-FETs on a silicon-on-insulator with /spl les/ 5-nm-diameter laterally formed Si nanowire channel. Alternating phase shift mask lithography and self-limiting oxidation techniques were utilized to form 140- to 1000-nm-long nanowires, followed by FET fabrication. The devices exhibit excellent electrostatic control, e.g., near ideal subthreshold slope (/spl sim/ 63 mV/dec), low drain-induced barrier lowering (/spl sim/ 10 mV/V), and with I/sub ON//I/sub OFF/ ratio of /spl sim/10/sup 6/. High drive currents of /spl sim/ 1.5 and /spl sim/1.0 mA//spl mu/m were achieved for 180-nm-long nand p-FETs, respectively. It is verified that the threshold voltage of GAA FETs is independent of substrate bias due to the complete electrostatic shielding of the channel body.     

On Restoring Interference in Joint Photon Counting Rate in Cascade Emission

Abstract

We propose an experimental scheme utilizing the different travelling speed of photons at different frequencies to ‘erase’ the time sequential distinguishability of photons emitted from the two steps of an atomic cascade. Interference in joint detection requires not only the overlapping of the same photon in time through different paths, but also the presence of both photons simultaneously.     

Remote Sensing and GIS Based Approach for Identification of Artificial Recharge Sites

The main aim of this paper is to demonstrate the capabilities of Remote Sensing (RS) and Geographic Information System (GIS) techniques for the demarcation of suitable sites for artificial recharge of groundwater aquifers, in the Loni watershed, located in Unnao and Raebareli districts, Uttar Pradesh, India. In this study, the SCS-CN model, groundwater depth data and morphological parameters (bifurcation ratio, elongation ratio, drainage density, ruggedness number, relief ratio, and circulatory ratio) have been used to delineate the recharge sites for undertaking water conservation measures. Augmentation of water resource is proposed in the watershed by constructing runoff storage structures, like check dam, percolation tank and nala bund. The site suitability for these water harvesting structures is determined by considering spatially varying parameters, like runoff potential, slope, groundwater fluctuation data and morphometric information of the watershed. GIS has been used as an effective tool to store, analyse and integrate spatial and attribute information pertaining to runoff, slope, drainage, groundwater fluctuation and morphometric characteristics for such studies.     

Evolution of RFIC Handset PAs

The first official shift in communication systems from fixed-location devices to portable/mobile devices happened in 1973 when Martin Cooper, general manager of Motorola's Communications Systems Division at the time, placed the first mobile call from a New York street using AT&T's network. Four years later, the first cell phone was made in Chicago with free trials offered to more than 2,000 people. The first commercial handset to receive FCC approval was Motorola's DynaTAC in 1983 [1], which was made available to the public a year later. This 1.13 kg (2.5 lb) phone that cost consumers US$3,500 was only able to achieve approximately 35 minutes of talk time and took almost 15 years to develop with the cost totaling US$100 million.     

Delay Uncertainty Reduction by Gate Splitting

Traditional timing-variation reduction techniques are only able to decrease gate delay variation by incurring a delay overhead. In this brief, we propose a novel and effective splitting-based variation reduction technique for gates. We developed a new tool called Timing Uncertainty Reduction by Gate Splitting (TURGS), which reduces the timing variations of a circuit and presents little delay overhead at the primary output. Our experimental results show that TURGS achieves up to 20% improvement in timing variation for gates.